P-385-63 Range Safety Pamphlet Download

Table 4–11 Surface danger zone data for 5.56mm Cartridge, M1037 Short Range Training Ammunition—Continued Altitude Impact Distance X 1 Distance Y (m) Distance W Angle P 2 Angle Q (deg) Ricochet vertical (ft) media (m) (m) (deg) hazard (m) Armor 459 424 10 6.5 3.9 11 Notes: 1 To correct for tail winds, Distance X must increase by 10m per m/s or 5m per knot of tail wind measured along the line of fire. 2 Angle P is measured from the dispersion angle. To correct for cross range winds, the 8 degree dispersion angle must increase by 1.10 degree per m/s or 0.55 degree per knot of cross range wind measured perpendicular to the line of fire. p. Table 4–12 contains SDZ data for 7.62mm small arms direct-fire weapons. Table 4–12 Surface danger zone data for 7.62mm small arms direct-fire weapons Ammunition Impact Distance Distance Distance Area Area Angle Angle Ricochet 7.62mm 1 media X Y W A 2 B P Q vertical (m) (m) (m) (m) (m) (deg) (deg) hazard (m) M59,M80 Ball, M62 Earth/Water Steel/Concrete 4,100 4,100 4,073 4,053 1,461 861 100 100 NR NR 43.54 20.04 38.90 75.54 706 447 7.62X39 mm A102 intermediate de- signed for AK se- ries, SKS, RPK Earth/Water Steel/Concrete 4,100 4,100 4,073 4,053 1,461 861 100 100 NR NR 43.54 20.04 38.90 75.54 706 447 M118 Spec Ball, M85 Earth/Water Steel/Concrete 5,288 5,288 4,800 5,137 1,545 990 100 100 NR NR 43.81 20.17 38.73 41.29 752 490 Legend for Table 4-12: NR=not required Notes: 1 For the 7.62 39mm (AK) the only authorized standard Department of Defense identification code (DODIC) to be used is A102. 2 Area A applies to cone SDZ only. q. Table 4–13 contains SDZ data for 7.62mm M993 armor piercing small arms weapons ammunition. Table 4–13 Surface danger zone data for M993 7.62mm armor piercing Altitude Impact Distance Distance Distance Area Area Angle Angle Ricochet (ft) media X Y W A 1 B P Q vertical hazard (m) (m) (m) (m) (m) (deg) (deg) (m) 0 Earth Steel 4,100 4,100 4,084 4,084 330 330 100 100 NR NR 33.32 33.32 5.97 5.97 224 224 1,000 Earth Steel 4,195 4,195 4,179 4,179 338 338 100 100 NR NR 33.51 33.51 6.00 6.00 229 229 2,000 Earth Steel 4,290 4,290 4,274 4,274 346 346 100 100 NR NR 33.69 33.69 6.03 6.03 234 234 3,000 Earth Steel 4,385 4,385 4,368 4,368 354 354 100 100 NR NR 33.87 33.87 6.06 6.06 239 239 4,000 Earth Steel 4,480 4,480 4,463 4,463 362 362 100 100 NR NR 34.04 34.04 6.09 6.09 244 244 5,000 Earth Steel 4,575 4,575 4,558 4,558 370 370 100 100 NR NR 34.20 34.20 6.12 6.12 249 249 6,000 Earth Steel 4,670 4,670 4,652 4,652 378 378 100 100 NR NR 34.36 34.36 6.14 6.14 254 254 39 DA PAM 385–63 • 16 April 2014