Air Sampling Adsorption Tube
Item Name Code (INC) 46029
![]() |
An item designed to be used in conjunction with an electric or manual handheld aspiration pump so as to draw and trap surrounding air vapors. The tube must be chromatographically analyzed, after use, in a laboratory. It does not have an integral indicator or produce colorimetric/color comparative results. It is preferably used in accordance with analytical methods published by the National Institute of Occupational Safty and Health Administration, Environment Protection Agency, Department of Health and HUMAN Services, and/or the Environmental Protection Agency.
Additional Information for Air Sampling Adsorption Tube
Air Sampling Adsorption Tubes are a type of laboratory equipment used for collecting and analyzing air samples. They are commonly used in environmental monitoring, industrial hygiene, and occupational health studies.
These tubes are designed to capture and retain specific gases, vapors, or volatile organic compounds (VOCs) present in the air. They consist of a glass or stainless steel tube filled with an adsorbent material, such as activated charcoal or silica gel. The adsorbent material has a high affinity for the target compounds, allowing them to be trapped and concentrated within the tube.
To use an air sampling adsorption tube, it is typically connected to an air sampling pump or a passive sampling device. The air sample is drawn through the tube, and the target compounds are adsorbed onto the adsorbent material. After sampling, the tube is sealed to prevent any loss or contamination of the collected sample.
The collected air samples can then be analyzed using various techniques, such as gas chromatography or mass spectrometry, to identify and quantify the target compounds. This information is valuable for assessing air quality, identifying potential sources of pollution, and evaluating exposure levels in occupational settings.
Air sampling adsorption tubes are available in different sizes and configurations to accommodate various sampling requirements. They may also come with additional accessories, such as flow controllers or calibration devices, to ensure accurate and reliable sampling results.
It is important to follow proper handling and storage procedures for air sampling adsorption tubes to maintain their integrity and prevent any cross-contamination. Manufacturers usually provide specific instructions on how to use and maintain these tubes, so it is recommended to refer to the product documentation for detailed guidelines.
Overall, air sampling adsorption tubes are essential tools for air quality monitoring and analysis, providing valuable data for environmental and occupational health studies.
Related Item Names for INC 46029 Air Sampling Adsorption Tube
NATO Stock Numbers with Item Name 46029 Air Sampling Adsorption Tube Page 1 of 1
- 225-13-4
- RNCC: 5 | RNVC: 2 | DAC: 3
- 201-001-0063
- RNCC: 3 | RNVC: 2 | DAC: 3
- SKC SORBENT TUBES
- RNCC: 5 | RNVC: 1 | DAC: 4
- 226-107
- RNCC: 3 | RNVC: 2 | DAC: 4
- 91-6-18-28
- RNCC: 5 | RNVC: 1 | DAC: 4
- 226-38-03
- RNCC: 3 | RNVC: 2 | DAC: 4
- 226-49-102
- RNCC: 3 | RNVC: 2 | DAC: 4
- 226-01
- RNCC: 3 | RNVC: 2 | DAC: 4
- 99-0064
- RNCC: 5 | RNVC: 1 | DAC: 4
- 99-0065
- RNCC: 5 | RNVC: 1 | DAC: 4
- 98-0330
- RNCC: 5 | RNVC: 1 | DAC: 4
- 98-0329
- RNCC: 5 | RNVC: 1 | DAC: 4
- SKC SORBENT TUBE
- RNCC: 5 | RNVC: 1 | DAC: 4
- SKC SORBENT TUBE
- RNCC: 5 | RNVC: 1 | DAC: 4
- ORBO
- RNCC: 5 | RNVC: 1 | DAC: 4
- SKC SORBENT TUBES
- RNCC: 5 | RNVC: 1 | DAC: 4
- SKC SORBENT TUBES
- RNCC: 5 | RNVC: 1 | DAC: 4
- 226-01
- RNCC: 3 | RNVC: 2 | DAC: E
- 27417
- RNCC: 3 | RNVC: 2 | DAC: 5
- 226-35-03
- RNCC: 3 | RNVC: 2 | DAC: 4
- 226-49-102
- RNCC: 3 | RNVC: 2 | DAC: E
- 431-101-0003
- RNCC: 3 | RNVC: 2 | DAC: 3
- 03-0176
- RNCC: 3 | RNVC: 2 | DAC: 3
- EUROGAS/75
- RNCC: 3 | RNVC: 2 | DAC: 5
- C1-AAXX-5003
- RNCC: 3 | RNVC: 2 | DAC: 4
- (241)AB965P226131
- RNCC: 5 | RNVC: 2 | DAC: U
- TFRA 40
- RNCC: 3 | RNVC: 2 | DAC: 5