Try And Miter Square
Item Name Code (INC) 13766
 |
A measuring tool consisting of a graduated blade permanently attached to a thicker beam forming a 90 degree angle. The beam (handle) has both square and miter faces.
Additional Information for Try And Miter Square
Try and Miter Square is a type of measuring tool commonly used by craftsmen. It falls under the supply class "Measuring Tools" and specifically belongs to the supply group "Craftsmen's Measuring Tools".
A Try Square is a tool used to measure and mark right angles accurately. It consists of a metal blade (usually made of steel) and a handle. The blade is usually 6 to 12 inches long and has a 90-degree angle at one end. The handle is attached to the blade at the other end, allowing the user to hold and maneuver the square easily.
A Miter Square, on the other hand, is a tool used to measure and mark angles other than 90 degrees accurately. It is similar to a Try Square but has an adjustable blade that can be set at different angles. This allows craftsmen to measure and mark angles for precise miter cuts in woodworking or other applications.
Both Try and Miter Squares are essential tools for craftsmen who require accurate measurements and angles in their work.
Related Item Names for INC 13766 Try And Miter Square
Plumb Bob Straightedge Key Seat Clamp Rule Clamp Center Gage Thread Cutting Tool Gage Thread Tool Setting Gage Combination Bevel Ship Carpenter's Bevel Sliding T Bevel Universal Bevel Butt Gage Marking Gage Marking And Mortise Gage Planer Gage Surface Gage Trammel Gage Block Set Draw Gage Dial Indicating Thickness Gage Tube Bead Gage Wheel Alignment Gage Twist Drill Gage Twist Drill And Drill Rod Gage Twist Drill And Tap Gage Rule Depth Gage Rivet Selector Gage Balance Wheel Caliper Thickness Gage Telescoping Gage Slide Caliper Hermaphrodite Caliper Inside Caliper Inside Thread Caliper Outside Caliper Outside Thread Caliper Screw And Wire Gage Sheet And Plate Gage Wire Gage Bench Level Cross Test Level Cross Test And Plumb Level Circular Vial Cylindrical Level Line Level Pocket Level Railroad Track Level Striding Level Level And Plumb Standard Master Disk Standard End Measuring Rod Measuring Roll Measuring Wire Combination Square Center Head Combination Square Square And Miter Head Dial Indicator Plain Taper Tri-Roll Gage Pipe Thread Tri-Roll Gage Gap Setting Gage Screw Pitch Gage Cylinder Gage Connecting Rod Bore Gage Internal Indicating Gage Outside Indicator Caliper Telephone Plug Gage Thickness Gage Blade Fillet And Radius Gage Engineer's Taper-Wire-Thickness Gage Combination Square Protractor Head Plain Mechanics Protractor Bevel Mechanics Protractor Mechanics' Dividers Vernier Gear Tooth Caliper Vernier Caliper Vernier Depth Gage Board Foot Content Log Rule Micrometer Head Climber's Gage Level Vial Dial Indicating Depth Gage Plumb Bob Sheath Railway Track Gage Dial Indicating Crankshaft Distortion Gage Combination Square Try And Miter Square Try Square Carpenter's Square Thin Steel Square Double Square Drill Point Gage Diemaker's Square Scale Indicator Gage Block Steel Measuring Tape Repair Kit Angle Gage Taper Gage Blacksmith's Rule Carpenter's Folding Rule Multiple Folding Rule Caliper Rule Combination Square Blade Hook Rule Circumference Rule Shrinkage Rule Glazier's Rule Yardstick Inside Micrometer Caliper Thread Micrometer Caliper Key Micrometer Caliper Paper Micrometer Caliper Sheet Metal Micrometer Caliper Bench Micrometer Caliper Outside Micrometer Caliper Tube Micrometer Caliper Micrometer Saw Tooth Set Gage Micrometer Depth Gage Steel Tape Handle Clamp Plumb Bob Cord Adjuster Plumb Bob Point Small Hole Gage Replacement Measuring Tape Toolmaker's Straightedge Set Measuring Ball Set Inside Micrometer Caliper Set Small Hole Gage Set Telescoping Gage Set Measuring Wire Set Finger Ring Mandrel Nail-Strap-Wire Gage Trammel Points Rule And Holder Set Petroleum Gage Stick Thickness Gage Stock Set Trammel Heads Thickness Gage Set Well Drilling Bit Gage Telephone Jack Gage Outside Micrometer Caliper Set Chalk Line And Reel Mechanic's Divider-Caliper Steel Measuring Tape Repair Section Optical Flat Optical Flat Set Measuring Tape Turning Radius Gage Diameter-Circumference Slide Caliper Door And Jamb Hinge Butt Template Bench Supermicrometer Caliper Hole Sizing And Locating Gage Pin Set Measuring Ball Typewriter Type Soldering Gage Thickness Gage Stock Cannon Bore Erosion Gage Meterstick Inside Indicator Caliper Folding Bevel Tubular Mounted Vial Plate Mounted Level Digital Display Caliper Nonfolding Rule Height Gage Electronic Level Measuring Tool Case Measuring Instrument Contact Point Dial Indicator Stand Cannon Bore Erosion Gage Guide Dial-Scale Indicator Extension Inside Micrometer Caliper Extension Magnetic Base Drill Bit Depth Gage Telescopic Rule Gage Block Holder Digital Display Depth Gage External Indicating Gage Injector Timing Gage Electrical Connector Quick Disconnect Adapter Gage Machine Gun Breech Bore Gage Fishing Net Meshing Gage Machinist's Rule Laser Range Meter Micrometer Haugh Laser Receiver Laser Level Dial Caliper Ultrasonic Range Meter Dial Indicator Holder
NATO Stock Numbers with Item Name 13766 Try And Miter Square Page 1 of 1
- 450 JOHNSON LEVEL
- RNCC: 5 | RNVC: 2 | DAC: 4
- GGG-S-656
- RNCC: 4 | RNVC: 1 | DAC: 3
- DELA-1223-04
- RNCC: 5 | RNVC: 2 | DAC: 4
- NO PRIMARY REF 66-150-1747
- RNCC: 3 | RNVC: 2 | DAC: 9
- NO PRIMARY REF 66-150-1746
- RNCC: 3 | RNVC: 2 | DAC: 9
- 36328005
- RNCC: 5 | RNVC: 9 | DAC: 9
- 62836
- RNCC: 3 | RNVC: 2 | DAC: 6
- 36328001
- RNCC: 5 | RNVC: 9 | DAC: 9
- DELA.1272.04
- RNCC: 3 | RNVC: 2 | DAC: 3
- 2043-150
- RNCC: 5 | RNVC: 9 | DAC: 9
- 07-320
- RNCC: 3 | RNVC: 2 | DAC: 1
- 2360500
- RNCC: 3 | RNVC: 2 | DAC: 3
- 36328004
- RNCC: 5 | RNVC: 9 | DAC: 9
- DELA.1272.02
- RNCC: 3 | RNVC: 2 | DAC: 6
- 16179-250
- RNCC: 3 | RNVC: 2 | DAC: 3
- DELA.1272.03
- RNCC: 3 | RNVC: 2 | DAC: 3
- 379-150
- RNCC: 3 | RNVC: 9 | DAC: 6
- 07-325
- RNCC: 3 | RNVC: 2 | DAC: 1
- DELA.1272.01
- RNCC: 3 | RNVC: 2 | DAC: 3
- 15-1571
- RNCC: 5 | RNVC: 9 | DAC: 4
- 54-300
- RNCC: 3 | RNVC: 2 | DAC: 3
- NO PRIMARY REF25-101-0812
- RNCC: 3 | RNVC: 2 | DAC: 9
- DELA-1300-06
- RNCC: 5 | RNVC: 2 | DAC: 4
- 81-300
- RNCC: 3 | RNVC: 2 | DAC: 3
- 36328002
- RNCC: 5 | RNVC: 9 | DAC: 9
- DELA-1300-04
- RNCC: 5 | RNVC: 2 | DAC: 4
- 1204-200MM
- RNCC: 5 | RNVC: 9 | DAC: 6
- 36328003
- RNCC: 5 | RNVC: 9 | DAC: 9
- NO PRIMARY REF25-100-4337
- RNCC: 3 | RNVC: 2 | DAC: 9
- 3170332130649
- RNCC: 5 | RNVC: 2 | DAC: U
- NO PRIMARY REF25-100-4338
- RNCC: 3 | RNVC: 2 | DAC: 9
- DELA-1234-04
- RNCC: 5 | RNVC: 2 | DAC: 4