Oscilloscope Control
Item Name Code (INC) 00931
Additional Information for Oscilloscope Control
Oscilloscope controls are the various settings and features available on an oscilloscope, which is a device used to measure and display electrical waveforms. These controls allow users to adjust and manipulate the input signal, as well as customize the display and measurement parameters. Some common oscilloscope controls include:
1. Timebase control: This control adjusts the horizontal scale or time duration displayed on the oscilloscope screen. It allows users to zoom in or out on the waveform to analyze different time intervals.
2. Vertical control: This control adjusts the vertical scale or voltage amplitude displayed on the oscilloscope screen. It allows users to amplify or attenuate the input signal to better visualize the waveform.
3. Trigger control: The trigger control determines when the oscilloscope starts capturing and displaying the waveform. It can be set to trigger on a specific voltage level, slope, or pattern in the signal.
4. Probe compensation control: This control is used to compensate for the impedance of the oscilloscope probe. It ensures accurate measurements by adjusting the probe's frequency response.
5. Measurement control: Oscilloscopes often have built-in measurement functions, such as voltage, frequency, and time measurements. The measurement control allows users to select and configure these measurements.
6. Display control: This control allows users to adjust the brightness, contrast, and persistence of the waveform display. It helps optimize the visibility and clarity of the waveform on the oscilloscope screen.
7. Cursor control: Cursors are used to make precise measurements on the waveform. The cursor control allows users to position and manipulate the cursors to measure voltage levels, time intervals, and other parameters.
These are just a few examples of the oscilloscope controls available. The specific controls and features may vary depending on the model and manufacturer of the oscilloscope.
Related Item Names for INC 00931 Oscilloscope Control
NATO Stock Numbers with Item Name 00931 Oscilloscope Control Page 1 of 1
- W3T105029
- RNCC: 3 | RNVC: 2 | DAC: 5
- 6402C
- RNCC: 3 | RNVC: 2 | DAC: 3