9905-00-570-9749

. 6610-12-188-6136Platine6610121886136 121886136 VG95211-ML-121886136 2944530021 944.53.29-00 944-53-29
Documents 6610-12-188-6136 1+ Documents ( More... ) https//www.nsnlookup.com /fsg-99/fsc-9905/us 9905-00-570-9749
Identification Plate 9905005709749 005709749 Part NumberManufacturerStatus1.HIBM-DB01A-53-29 https

https//www.nsnlookup.com /cage Microwave Engineering Corporation (CAGE Code 06351) 25 Sep 1984 9905-00-570-9749

4730-99-198-0148 4730991980148 991980148 is a clamp in which the body (band or wire) completely encircles an item and distributes a relatively even amount of pressure throughout the entire 360 degrees (6.282 radians) of the periphery of the item to be compressed. its compression quality is dependent upon an integral screw mechanism, (screw, bolt spring compression and the like mechanical fasteners), or it may be applied by a device not integral with the clamp itself. it is specifically designed to prevent leakage between a hose and its attaching connection(s) when the body of the clamp is round or circular. for square, rectangular, or irregularly shaped items, see clamp, hose, special-shaped. excludes clamp, electrical; clamp, loop; clamp, fire hose, shutoff; ferrule (as modified); and hand screw.

JavaScript in your web browser . 3120-27-011-8065Sleeve Bushing3120270118065 270118065 1.HIBM-DB01A-53-29
27-011-8065 Turkey (ZW) Approved Sources 3120-27-011-8065 Part NumberManufacturerStatus1.HIBM-DB01A-53-29

5306-99-135-2649 5306991352649 991352649 is an externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. see also screw, cap, hexagon head and screw, machine.