9905-98-206-1823

Cleveland 6. 93029 Anchor Rubber Products Inc is a Succeeded(Merged) Manufacturer with the Cage Code
93029.
What is CAGE Code 93029?

Address:360 E Intl Airport Rd PO Box 93029 AnchorageAK99509-3029 United States Points of Contact:Telephone
reference the physical entity known as Blaines Paint Store Inc located at 360 E Intl Airport Rd, PO Box 93029
0GXU7 refers to Blaines Paint Store Inc located at 360 E Intl Airport Rd, PO Box 93029, Anchorage AK

5310-14-226-1838 5310142261838 142261838 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

3040-14-285-0810 3040142850810 142850810 is an irregularly shaped item, that revolves around an axis, or slides within limits, which actuates other parts by contact to change the direction, speed and/or timing of a part in motion. a shaft is not included. it usually is part of a camshaft (as modified).

5935-01-506-5586 5935015065586 015065586 is an item designed to electrically connect and mechanically position the base of an item having plug-in-type contacts, and to facilitate replacement of the item accommodated. it includes sockets which accommodate the contacts of capacitors, coils, crystals, electron tubes, relays, semiconductor devices and vibrators. excludes sockets or receptacles designed to accommodate plug-in component circuit boards (printed circuit boards) and electronic modules or sub-assemblies. also excludes heat-dissipating (not heat-sinks) sockets for mounting "power transistors".