Premium Information is available for this item - Upgrade for $1 a day
9540-01-558-7799
Structural Beam
9540015587799 015587799 LS31091-1
A structural shape fabricated from a ferrous or nonferrous material and resembles the following cross-sectional forms: For the letter H, both flanges of the H section are equal or longer than the width measured along the axis of the web; for the letter I, a 16 2/3 percent slope on the inside face of the ferrous type flange, either one or both of the nonferrous type flanges are shorter than the length measured along the axis of the web; for the letters T and Z, on nonferrous type, the web is usually at right angles to the flanges. Letter H section may have a maximum of 5 percent slope on the inside face of the flanges. View more Structural Beam
January 2023
2
Marketplace 9540-01-558-7799
Request a Quotation from participating marketplace vendors
Related Documents 9540-01-558-7799 1+ Documents (More...)
LS31091-1 BEAM,STRUCTURAL RQST NS Request Quotation Updated Every Day 9540-01-558-7799 RQST NE Updated
Every Day 9540-01-558-7799 RQST Updated Every Day 9540-01-558-7799 RQST NE Related Documents 9540-01
Restrictions 9540-01-558-7799
9540-01-558-7799 is a Structural Beam that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 9540-01-558-7799
- Belgium (ZB01)
- Effective Date:
- 1 Nov 2007
Approved Sources 9540-01-558-7799
- Part Number
- Manufacturer
- Status
- LS31091-1
- Manufacturer
- 98897 - Lockheed Martin Corp (Active)
- Primary Buy
- Primary Buy
Datasheet 9540-01-558-7799
- Characteristic
- Specifications
- FIIG
- Specifications
- A13100
- Basic Shape Style [AGTA]
- I Shape
- Bottom Flange Width [BQJH]
- 2.000 Inches Nominal
- Fourth Tip Style [CNQP]
- Upper Radius
- Fourth Tip Relationship To Preceding Tips [CNQN]
- Not Identical
- Heat Treatment [HEAT]
- Tempered
- Material [MATT]
- Aluminum Alloy 7075
- Left Side Bottom Flange Thickness [BMPR]
- 0.125 Inches Nominal
- Left Side Top Flange Thickness [ADXR]
- 0.125 Inches Nominal
- Right Side Bottom Flange Thickness [BMPQ]
- 0.125 Inches Nominal
- Right Side Top Flange Thickness [ADXS]
- 0.125 Inches Nominal
- Second Tip Relationship To First Tip [CNQJ]
- Not Identical
- Second Tip Style [CNQK]
- Lower Radius
- Overall Height [ABKW]
- 1.500 Inches Nominal
- Top Flange Width [BQJG]
- 2.000 Inches Nominal
- Web Flange Thickness [BPXN]
- 0.125 Inches Nominal
- Third Tip Style [CNQM]
- Left Quarter Radius
- Third Tip Relationship To Preceding Tips [CNQL]
- Not Identical
Similar Supply Items to 9540-01-558-7799
Freight Information 9540-01-558-7799
9540-01-558-7799 has freight characteristics.. 9540-01-558-7799 has a variance between NMFC and UFC when transported by rail and the description should be consulted.