Premium Information is available for this item - Upgrade for $1 a day
9540-01-496-1466
Structural Beam
9540014961466 014961466 AMS-QQ-A-200/11 1MA160D06-10151 QQ-A-200/11
A structural shape fabricated from a ferrous or nonferrous material and resembles the following cross-sectional forms: For the letter H, both flanges of the H section are equal or longer than the width measured along the axis of the web; for the letter I, a 16 2/3 percent slope on the inside face of the ferrous type flange, either one or both of the nonferrous type flanges are shorter than the length measured along the axis of the web; for the letters T and Z, on nonferrous type, the web is usually at right angles to the flanges. Letter H section may have a maximum of 5 percent slope on the inside face of the flanges. View more Structural Beam
May 2023
10
Marketplace 9540-01-496-1466
Request a Quotation from participating marketplace vendors
Updated Every 15 Minutes 
Updated Every Day Updated Every Day 
Updated Every Day Related Documents 9540-01-496-1466 5+ Documents (More...)
- // AMS-QQ-A - -200/11 - - AMS-QQ-A /11 - - AMS-QQ-A -200/11 - - - - AMS-QQ-A -200/11 BEAM AMS-QQ-A
/11 /11 AMS-QQ-A-200/11 200 AMS-QQ-A -200/ 11 // AMS-QQ-A -200 /11 / 9540013482848013482848AMS-QQ-A
Structural Beam 9540014961466 014961466 11 - /11 - - AMS-QQ-A -200 /11 - - AMS-QQ-A-200 https//
- - AMS-QQ-A -200/11 BEAM AMS-QQ-A-200/11 /11 AMS-QQ-A -200/11 - - AMS-QQ-A https/ BEAM - - AMS-QQ-A
BEAM - - AMS-QQ-A-200/11 - // AMS-QQ-A - -200/11 - - AMS-QQ-A /11 - - AMS-QQ-A -200/11 - -
- - AMS-QQ-A-200/11 - // AMS-QQ-A AMS-QQ-A-200 / /11 - - AMS-QQ-A A https AMS-QQ-A-200 /11 BEAM
200 AMS-QQ-A-200 / /11 - - AMS-QQ-A-200/11 - // AMS-QQ-A -200 /11 A https AMS-QQ-A-200 /11 BEAM 200 AMS-QQ-A
- - AMS-QQ-A-200/11 /11 AMS-QQ-A -200/ 11 - - AMS-QQ-A -200 /11 /fsg-95 /11 AMS-QQ-A -200/11 - - AMS-QQ-A
BEAM 200 AMS-QQ-A-200/ / 11 - - AMS-QQ-A-200 /11 /11 // // AMS-QQ-A AMS-QQ-A-200 11 - - AMS-QQ-A
Restrictions 9540-01-496-1466
9540-01-496-1466 is a Structural Beam that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
End Users 9540-01-496-1466
- US Navy (N9BZ)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- N9ZD
- Supplementary Collaborators:
- KE
Approved Sources 9540-01-496-1466
- Part Number
- Manufacturer
- Status
- AMS-QQ-A-200/11
- Manufacturer
- 0U583 - Sae International (Active)
- Incomplete Reference
- Incomplete Reference
- 1MA160D06-10151
- 76301 - The Boeing Company (Active)
- Primary Buy
- Primary Buy
- QQ-A-200/11
- 81348 - Federal Specifications Promulgated (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- AMS-QQ-A-200/11
- 81343 - Society Of Automotive Engineers Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 9540-01-496-1466
- Characteristic
- Specifications
- FIIG
- Specifications
- A13100
- Basic Shape Style [AGTA]
- T Shape
- Fabrication Method [AARN]
- Extruded
- First Tip Style [CMZY]
- Square End
- Heat Treatment [HEAT]
- Temper T78511
- Material Document And Classification [MDCL]
- Qq-A-200/11 Fed Spec 1St Material Response
- Material [MATT]
- Aluminum Alloy 7075
- Nondefinitive Spec/Std Data [ZZZT]
- Alloy 7075,Temper T78511
- Left Side Top Flange Distance To Center Of Both Flanges [BPXD]
- 1.050 Inches Nominal
- Left Side Top Flange Thickness [ADXR]
- 0.080 Inches Nominal
- Left Top Inside Angle [CSMZ]
- 90.0 Degrees Nominal
- Leg Thickness [AJJP]
- 0.080 Inches Nominal
- Length [ABRY]
- 10.000 Feet Minimum And 12.000 Feet Maximum
- Right Side Top Flange Distance To Center Of Both Flanges [BPXG]
- 1.050 Inches Nominal
- Right Side Top Flange Thickness [ADXS]
- 0.080 Inches Nominal
- Right Top Inside Angle [CRZC]
- 90.0 Degrees Nominal
- Second Tip Relationship To First Tip [CNQJ]
- Identical
- Overall Height [ABKW]
- 1.100 Inches Nominal
- Special Features [FEAT]
- Angle Ends Are Radius Per Data Provided
- Top Flange Width [BQJG]
- 2.100 Inches Nominal
- Weight Per Unit Measure [BRFD]
- 0.345 Pounds Per Linear Foot
- Third Tip Relationship To Preceding Tips [CNQL]
- Identical W/First Tip
DLA Procurement Analysis 9540-01-496-1466
Management Data 9540-01-496-1466
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 9540-01-496-1466
Freight Information 9540-01-496-1466
9540-01-496-1466 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 104420. A Sub NMFC of X. It has a NMFC Description of BEAMS NOI I/S. 9540-01-496-1466 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 53800 which rates the freight between FCL and LCL. 9540-01-496-1466 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 576 for ocean manifesting and military sealift. 9540-01-496-1466 is not classified as a special type of cargo when transported by water. 9540-01-496-1466 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 9540-01-496-1466 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- T
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: