Premium Information is available for this item - Upgrade for $1 a day
9540-01-471-8266
Structural Beam
9540014718266 014718266 CVC10010-111CA
A structural shape fabricated from a ferrous or nonferrous material and resembles the following cross-sectional forms: For the letter H, both flanges of the H section are equal or longer than the width measured along the axis of the web; for the letter I, a 16 2/3 percent slope on the inside face of the ferrous type flange, either one or both of the nonferrous type flanges are shorter than the length measured along the axis of the web; for the letters T and Z, on nonferrous type, the web is usually at right angles to the flanges. Letter H section may have a maximum of 5 percent slope on the inside face of the flanges. View more Structural Beam
May 2023
3
Marketplace 9540-01-471-8266
Request a Quotation from participating marketplace vendors
Related Documents 9540-01-471-8266 1+ Documents (More...)
Updated Every Day 9540-01-471-8266 RQST NE Related Documents 9540-01-471-8266 1+ Documents ( More...
Every Day 9540-01-471-8266 RQST NE Related Documents 9540-01-471-8266 1+ Documents ( More...
Restrictions 9540-01-471-8266
9540-01-471-8266 is a Structural Beam that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
End Users 9540-01-471-8266
- US Air Force (FNN5)
- Effective Date:
- 1 Jun 2003
- Former MOE Rule:
- FGKZ
Approved Sources 9540-01-471-8266
- Part Number
- Manufacturer
- Status
- CVC10010-111CA
- Manufacturer
- 80378 - Triumph Aerostructures, Llc (Active)
- Primary Buy
- Primary Buy
Datasheet 9540-01-471-8266
- Characteristic
- Specifications
- FIIG
- Specifications
- A13100
- Basic Shape Style [AGTA]
- T Shape
- Fabrication Method [AARN]
- Extruded
- Fillet Radius Where Top Left Flange Joins Web Flange/Leg [BPXJ]
- 0.200 Inches Nominal
- Fillet Radius Where Top Right Flange Joins Web Flange/Leg [BPXL]
- 0.200 Inches Nominal
- First Tip Inner Radius [CNBD]
- 0.032 Inches Nominal
- First Tip Outer Radius [CNBJ]
- 0.032 Inches Nominal
- First Tip Style [CMZY]
- Square W/ Inner And Outer Corner Radii
- Heat Treatment [HEAT]
- O-Annealed
- Material [MATT]
- Aluminum Alloy 7075
- Left Side Top Flange Distance To Center Of Both Flanges [BPXD]
- 1.750 Inches Nominal
- Left Side Top Flange Thickness [ADXR]
- 0.200 Inches Nominal
- Left Top Inside Angle [CSMZ]
- 90.0 Degrees Nominal
- Leg Thickness [AJJP]
- 0.200 Inches Nominal
- Length [ABRY]
- 20.000 Feet Nominal
- Right Side Top Flange Distance To Center Of Both Flanges [BPXG]
- 1.750 Inches Nominal
- Right Side Top Flange Thickness [ADXS]
- 0.200 Inches Nominal
- Right Top Inside Angle [CRZC]
- 90.0 Degrees Nominal
- Second Tip Relationship To First Tip [CNQJ]
- Identical
- Overall Height [ABKW]
- 1.950 Inches Nominal
- Special Features [FEAT]
- Ws Is Aircraft,B-2 Bomber (Atb)
- Top Flange Width [BQJG]
- 3.500 Inches Nominal
- Weight Per Unit Measure [BRFD]
- 1.284 Pounds Per Linear Foot
- Third Tip Relationship To Preceding Tips [CNQL]
- Identical W/First Tip
DLA Procurement Analysis 9540-01-471-8266
Management Data 9540-01-471-8266
Similar Supply Items to 9540-01-471-8266
Freight Information 9540-01-471-8266
9540-01-471-8266 has freight characteristics.. 9540-01-471-8266 has a variance between NMFC and UFC when transported by rail and the description should be consulted.
Contracting Technical Data File (CTDF) 9540-01-471-8266 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: