Premium Information is available for this item - Upgrade for $1 a day
9540-01-464-7915
Structural Beam
9540014647915 014647915 MS-344 MIL-T-9046 01AT260T01-0105
A structural shape fabricated from a ferrous or nonferrous material and resembles the following cross-sectional forms: For the letter H, both flanges of the H section are equal or longer than the width measured along the axis of the web; for the letter I, a 16 2/3 percent slope on the inside face of the ferrous type flange, either one or both of the nonferrous type flanges are shorter than the length measured along the axis of the web; for the letters T and Z, on nonferrous type, the web is usually at right angles to the flanges. Letter H section may have a maximum of 5 percent slope on the inside face of the flanges. View more Structural Beam
May 2023
6
Marketplace 9540-01-464-7915
Request a Quotation from participating marketplace vendors
Related Documents 9540-01-464-7915 5+ Documents (More...)
MIL-T-9046 BEAM,STRUCTURAL 369 FT NS Request Quotation FedMall Updated Every 15 Minutes 9540-01-464-7915
15 Minutes 9540-01-464-7915 // MIL-T-9046 https//www.nsnlookup.com https https//www.nsnlookup.com https
, MIL-T-9046 Beam , MIL-T-9046 https MIL-T-9046 -9046 MIL-T-9046 Metal MIL-T- 9046 , MIL-T // Metal
4911 , MIL-T-9046 ,AB MIL-T- 9046 , ,AMS , MIL-T-9046,AB MIL-T-9046, ,AMS 4911 ,AB AMS 4911 , MIL-T-
, MIL-T Metal MIL-T-9046 , MIL-T-9046 Beam , MIL-T-9046 https MIL-T MIL-T // Metal MIL-T -9046 ,
MIL-T-9046 Beam , MIL-T-9046 https MIL-T-9046 -9046 MIL-T-9046 Metal MIL-T https//www.nsnlookup.com
-9046MIL-T -9046 Metal Metal MIL-T-9046 , MIL-T Metal MIL-T-9046 , MIL-T- https//www.nsnlookup.com /
, MIL-T-9046 Beam , MIL-T-9046 https MIL-T-9046 -9046 MIL-T-9046 Metal MIL-T- 9046 , MIL-T // Metal
Beam , MIL-T-9046 https MIL-T-9046 -9046 MIL-T-9046 Metal MIL-T- 9046 , MIL-T // Metal MIL-T -9046 Metal
MIL-T-9046 , MIL-T // Metal MIL-T-9046 Metal MIL-T-9046 // Metal MIL-T-9046 Metal MIL-T -9046 , MIL-T
Restrictions 9540-01-464-7915
9540-01-464-7915 is a Structural Beam that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 9540-01-464-7915
- US Air Force (FGGI)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- FGKZ
Approved Sources 9540-01-464-7915
- Part Number
- Manufacturer
- Status
- MS-344
- Manufacturer
- 1W025 - Northrop Grumman Systems Corp (Active)
- Incomplete Reference
- Incomplete Reference
- 01AT260T01-0105
- 1W025 - Northrop Grumman Systems Corp (Active)
- Primary Buy
- Primary Buy
- MIL-T-9046
- 81349 - Military Specifications (Active)
- Incomplete Standard
- Incomplete Standard
Datasheet 9540-01-464-7915
- Characteristic
- Specifications
- FIIG
- Specifications
- A13100
- Basic Shape Style [AGTA]
- T Shape
- Fabrication Method [AARN]
- Extruded
- Fillet Radius Where Top Left Flange Joins Web Flange/Leg [BPXJ]
- 0.375 Inches Nominal
- Fillet Radius Where Top Right Flange Joins Web Flange/Leg [BPXL]
- 0.375 Inches Nominal
- First Tip Inner Radius [CNBD]
- 0.062 Inches Nominal
- First Tip Outer Radius [CNBJ]
- 0.062 Inches Nominal
- First Tip Style [CMZY]
- Square W/ Inner And Outer Corner Radii
- Heat Treatment [HEAT]
- Annealed
- Material [MATT]
- Titanium Alloy, Mil-T-81556,Comp Ab-1
- Nondefinitive Spec/Std Data [ZZZT]
- Composition 6Al-4V And Condition Annealed
- Left Side Top Flange Distance To Center Of Both Flanges [BPXD]
- 2.250 Inches Nominal
- Left Side Top Flange Thickness [ADXR]
- 0.475 Inches Nominal
- Left Top Inside Angle [CSMZ]
- 90.0 Degrees Nominal
- Leg Thickness [AJJP]
- 0.420 Inches Nominal
- Length [ABRY]
- 10.000 Feet Minimum And 12.000 Feet Maximum
- Right Side Top Flange Distance To Center Of Both Flanges [BPXG]
- 2.250 Inches Nominal
- Right Side Top Flange Thickness [ADXS]
- 0.475 Inches Nominal
- Right Top Inside Angle [CRZC]
- 90.0 Degrees Nominal
- Second Tip Relationship To First Tip [CNQJ]
- Identical
- Overall Height [ABKW]
- 1.600 Inches Nominal
- Top Flange Width [BQJG]
- 4.500 Inches Nominal
- Third Tip Relationship To Preceding Tips [CNQL]
- Identical W/First Tip
DLA Procurement Analysis 9540-01-464-7915
Management Data 9540-01-464-7915
Similar Supply Items to 9540-01-464-7915
Freight Information 9540-01-464-7915
9540-01-464-7915 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 104420. A Sub NMFC of X. It has a NMFC Description of BEAMS NOI I/S. 9540-01-464-7915 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 53800 which rates the freight between FCL and LCL. 9540-01-464-7915 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 576 for ocean manifesting and military sealift. 9540-01-464-7915 is not classified as a special type of cargo when transported by water. 9540-01-464-7915 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 9540-01-464-7915 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- K
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: