Premium Information is available for this item - Upgrade for $1 a day
9540-01-449-1726
Structural Beam
9540014491726 014491726 CVC10013-1001MP
A structural shape fabricated from a ferrous or nonferrous material and resembles the following cross-sectional forms: For the letter H, both flanges of the H section are equal or longer than the width measured along the axis of the web; for the letter I, a 16 2/3 percent slope on the inside face of the ferrous type flange, either one or both of the nonferrous type flanges are shorter than the length measured along the axis of the web; for the letters T and Z, on nonferrous type, the web is usually at right angles to the flanges. Letter H section may have a maximum of 5 percent slope on the inside face of the flanges. View more Structural Beam
May 2023
7
Marketplace 9540-01-449-1726
Request a Quotation from participating marketplace vendors
Related Documents 9540-01-449-1726 1+ Documents (More...)
BUY NE FedMall Updated Every Day 9540-01-449-1726 RQST NE Updated Every Day 9540-01-449-1726 RQST
Updated Every Day 9540-01-449-1726 RQST NE Related Documents 9540-01-449-1726 1+ Documents ( More...
Restrictions 9540-01-449-1726
9540-01-449-1726 is a Structural Beam that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 9540-01-449-1726
- US Air Force (FNN5)
- Effective Date:
- 1 Jun 2003
- Former MOE Rule:
- FGKZ
Approved Sources 9540-01-449-1726
- Part Number
- Manufacturer
- Status
- CVC10013-1001MP
- Manufacturer
- 80378 - Triumph Aerostructures, Llc (Active)
- Primary Buy
- Primary Buy
Datasheet 9540-01-449-1726
- Characteristic
- Specifications
- FIIG
- Specifications
- A13100
- Basic Shape Style [AGTA]
- I Shape
- Bottom Flange Width [BQJH]
- 4.950 Inches Nominal
- Fabrication Method [AARN]
- Extruded
- First Tip Style [CMZY]
- Square End
- Heat Treatment [HEAT]
- Annealed
- Material [MATT]
- Titanium Alloy, Mil-T-81556
- Nondefinitive Spec/Std Data [ZZZT]
- Composition 6Al-2Sn-4Zr-2Mo And Condition Annealed
- Left Side Bottom Flange Distance To Center Of Both Flanges [BPXF]
- 2.400 Inches Nominal
- Left Side Bottom Flange Thickness [BMPR]
- 1.430 Inches Nominal
- Left Bottom Inside Angle [CTBR]
- 90.0 Degrees Nominal
- Left Side Top Flange Distance To Center Of Both Flanges [BPXD]
- 2.400 Inches Nominal
- Left Side Top Flange Thickness [ADXR]
- 1.430 Inches Nominal
- Left Top Inside Angle [CSMZ]
- 98.0 Degrees Nominal
- Leg Thickness [AJJP]
- 0.540 Inches Nominal
- Length [ABRY]
- 10.000 Feet Minimum And 12.000 Feet Maximum
- Right Side Bottom Flange Distance To Center Of Both Flanges [BPXH]
- 2.550 Inches Nominal
- Right Side Bottom Flange Thickness [BMPQ]
- 1.430 Inches Nominal
- Right Side Top Flange Distance To Center Of Both Flanges [BPXG]
- 2.550 Inches Nominal
- Right Side Top Flange Thickness [ADXS]
- 1.170 Inches Nominal
- Right Top Inside Angle [CRZC]
- 82.0 Degrees Nominal
- Right Bottom Inside Angle [CWKK]
- 90.0 Degrees Nominal
- Second Tip Relationship To First Tip [CNQJ]
- Identical
- Overall Height [ABKW]
- 2.900 Inches Nominal
- Top Flange Width [BQJG]
- 4.950 Inches Nominal
- Web Flange Thickness [BPXN]
- 1.170 Inches Nominal
- Third Tip Relationship To Preceding Tips [CNQL]
- Identical W/First Tip
DLA Procurement Analysis 9540-01-449-1726
Management Data 9540-01-449-1726
Similar Supply Items to 9540-01-449-1726
Freight Information 9540-01-449-1726
9540-01-449-1726 has freight characteristics managed by the Southwestern Power Administration.. 9540-01-449-1726 has a variance between NMFC and UFC when transported by rail and the description should be consulted.
Contracting Technical Data File (CTDF) 9540-01-449-1726 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: