Premium Information is available for this item - Upgrade for $1 a day
9540-01-398-4040
Structural Beam
9540013984040 013984040 AND10140-2002 7075-T6511
A structural shape fabricated from a ferrous or nonferrous material and resembles the following cross-sectional forms: For the letter H, both flanges of the H section are equal or longer than the width measured along the axis of the web; for the letter I, a 16 2/3 percent slope on the inside face of the ferrous type flange, either one or both of the nonferrous type flanges are shorter than the length measured along the axis of the web; for the letters T and Z, on nonferrous type, the web is usually at right angles to the flanges. Letter H section may have a maximum of 5 percent slope on the inside face of the flanges. View more Structural Beam
November 2023
3
Marketplace 9540-01-398-4040
Request a Quotation from participating marketplace vendors
Related Documents 9540-01-398-4040 1+ Documents (More...)
BUY NE FedMall Updated Every Day 9540-01-398-4040 RQST NE Updated Every Day 9540-01-398-4040 RQST
Updated Every Day 9540-01-398-4040 RQST NE Related Documents 9540-01-398-4040 1+ Documents ( More...
Restrictions 9540-01-398-4040
9540-01-398-4040 is a Structural Beam that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 9540-01-398-4040
- National Security Agency (DGX1)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- DKZ1
- Supplementary Receivers:
- KZ
Approved Sources 9540-01-398-4040
- Part Number
- Manufacturer
- Status
- AND10140-2002 7075-T6511
- Manufacturer
- 99237 - Airforce-Navy Aeronautical Design (Active)
- Definitive Standard
- Definitive Standard
Datasheet 9540-01-398-4040
- Characteristic
- Specifications
- FIIG
- Specifications
- A13100
- Basic Shape Style [AGTA]
- H Shape
- Fabrication Method [AARN]
- Extruded
- Fillet Radius Where Bottom Left Flange Joins Web Flange/Leg [BPXK]
- 0.125 Inches Nominal
- Fillet Radius Where Bottom Right Flange Joins Web Flange/Leg [BPXM]
- 0.125 Inches Nominal
- Fillet Radius Where Top Left Flange Joins Web Flange/Leg [BPXJ]
- 1.000 Inches Nominal
- Fillet Radius Where Top Right Flange Joins Web Flange/Leg [BPXL]
- 0.125 Inches Nominal
- First Tip Inner Radius [CNBD]
- 0.125 Inches Nominal
- First Tip Outer Radius [CNBJ]
- 0.125 Inches Nominal
- First Tip Style [CMZY]
- Square W/ Inner And Outer Corner Radii
- Fourth Tip Relationship To Preceding Tips [CNQN]
- Identical W/First Tip
- Heat Treatment [HEAT]
- T-6511 Solution Heat Treated
- Material Document And Classification [MDCL]
- Qq-A-200/12 Fed Spec 1St Material Response
- Material [MATT]
- Aluminum Alloy 7079
- Left Side Bottom Flange Distance To Center Of Both Flanges [BPXF]
- 1.000 Inches Nominal
- Left Side Flange Height [ADXJ]
- 2.000 Inches Nominal
- Left Bottom Inside Angle [CTBR]
- 90.0 Degrees Nominal
- Left Side Flange Thickness [ADXL]
- 0.125 Inches Nominal
- Left Side Top Flange Distance To Center Of Both Flanges [BPXD]
- 1.000 Inches Nominal
- Left Top Inside Angle [CSMZ]
- 90.0 Degrees Nominal
- Length [ABRY]
- 10.000 Feet Minimum And 12.000 Feet Maximum
- Right Side Bottom Flange Distance To Center Of Both Flanges [BPXH]
- 0.125 Inches Nominal
- Right Side Flange Height [ADXK]
- 2.000 Inches Nominal
- Right Side Flange Thickness [ADXM]
- 0.125 Inches Nominal
- Right Side Top Flange Distance To Center Of Both Flanges [BPXG]
- 1.000 Inches Nominal
- Right Top Inside Angle [CRZC]
- 90.0 Degrees Nominal
- Right Bottom Inside Angle [CWKK]
- 90.0 Degrees Nominal
- Second Tip Outer Radius [CNBK]
- 0.031 Inches Nominal
- Second Tip Inner Radius [CNBF]
- 0.031 Inches Nominal
- Second Tip Relationship To First Tip [CNQJ]
- Not Identical
- Second Tip Style [CNQK]
- Square W/ Inner And Outer Corner Radii
- Overall Width [ABMK]
- 2.000 Inches Nominal
- Web Flange Thickness [BPXN]
- 0.125 Inches Nominal
- Third Tip Inner Radius [CNBG]
- 0.125 Inches Nominal
- Third Tip Outer Radius [CNBL]
- 0.031 Inches Nominal
- Third Tip Style [CNQM]
- Square W/ Inner And Outer Corner Radii
- Third Tip Relationship To Preceding Tips [CNQL]
- Not Identical
Weapon Systems (WSDC) 9540-01-398-4040
DLA Procurement Analysis 9540-01-398-4040
- Last Stock Position:
- 120 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 9540-01-398-4040
Similar Supply Items to 9540-01-398-4040
Freight Information 9540-01-398-4040
9540-01-398-4040 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 104420. A Sub NMFC of X. It has a NMFC Description of BEAMS NOI I/S. 9540-01-398-4040 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 53800 which rates the freight between FCL and LCL. 9540-01-398-4040 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 576 for ocean manifesting and military sealift. 9540-01-398-4040 is not classified as a special type of cargo when transported by water. 9540-01-398-4040 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 9540-01-398-4040
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- --
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- No Requirement
- Special requirements
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
- No Requirement
Procurement History 9540-01-398-4040 1 Records
Contracting Technical Data File (CTDF) 9540-01-398-4040 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: