Premium Information is available for this item - Upgrade for $1 a day
9540-01-369-5549
Structural Channel
9540013695549 013695549 1MA122B04-10034 AMS-QQ-A-200/3 60-21794 QQ-A-200/3 ASTM B221
A structural shape fabricated from a ferrous or nonferrous material and has a flange extending usually at right angles in the same direction from each edge of a web and/or resembling the letter U in cross-sectional form. View more Structural Channel
June 2023
12
Marketplace 9540-01-369-5549
Request a Quotation from participating marketplace vendors
Related Documents 9540-01-369-5549 5+ Documents (More...)
AMS-QQ-A-200/3 ASTM B221 QQ-A-200/3 A AMS-QQ-A-200/ -T8511 QQ-A-200/3 ASTM B221 10164540 9540PL0900332
,STRUCTURAL AMS-QQ-A-200/3 BEAM,STRUCTURAL AMS-QQ-A-200/3 BEAM,STRUCTURAL ,STRUCTURAL AMS-QQ-A-200/3
Quotation QQ-A-200/3 BEAM ,STRUCTURAL AMS-QQ-A-200/3 BEAM,STRUCTURAL Quotation QQ-A-200/3 BEAM https
ASTM B221 QQ-A-200/3 A AMS-QQ-A-200/ -T8511 QQ-A-200/3 ASTM B221 10164540 9540PL0900332 https/
AMS-QQ-A-200/3 ASTM B221 QQ-A-200/3 A AMS-QQ-A https//www.nsnlookup.com /fsg-95/fsc-9530/ca 9530-21
AMS-QQ-A-200/3 ASTM B221 QQ-A-200/3 A AMS-QQ-A https//www.nsnlookup.com /fsg-95/fsc-9530/us 9530-01-
AMS-QQ-A-200/3 ANGLE,STRUCTURAL 2 EA NS Request Quotation Subscribe to View Vendor Details... 8579 ANGLE
QQ-A200/3 ANGLE,STRUCTURAL 567 EA NS Request Quotation AMS-QQ-A-200/3 ANGLE,STRUCTURAL 3 EA NS Request
/fsg-95/fsc-9540/ca 9540-21-872-1402 Special Shaped Structural Section 218721402 AMS-QQ-A-200/3 ASTM
Angle 9540217472008 217472008,HA.5 AMS-QQ-A-200/3 ASTM B221 QQ-A-200/3 A AMS-QQ-A-200/ -T8511 QQ-A-200
Restrictions 9540-01-369-5549
9540-01-369-5549 is a Structural Channel that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 9540-01-369-5549
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 9540-01-369-5549
- US Air Force (FGGI)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- FGKZ
- US Navy (N9BZ)
- Effective Date:
- 1 Jan 2014
- Supplementary Collaborators:
- GG
- Brazil (YA01)
- Effective Date:
- 1 Jul 2001
Approved Sources 9540-01-369-5549
- Part Number
- Manufacturer
- Status
- 1MA122B04-10034
- Manufacturer
- 76301 - The Boeing Company (Active)
- Incomplete Reference
- Incomplete Reference
- AMS-QQ-A-200/3
- 0U583 - Sae International (Active)
- Incomplete Reference
- Incomplete Reference
- 60-21794
- 29321 - Transtar Metals Corp (Active)
- Primary Buy
- Primary Buy
- QQ-A-200/3
- 81348 - Federal Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- ASTM B221
- 81346 - American Society For Testing And (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- AMS-QQ-A-200/3
- 81343 - Society Of Automotive Engineers Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 9540-01-369-5549
- Characteristic
- Specifications
- FIIG
- Specifications
- A13100
- Base Flange Thickness [AJGP]
- 0.063 Inches Nominal
- Basic Shape Style [AGTA]
- Channel
- Distance Between Flanges [AGRS]
- 1.303 Inches Nominal
- Fabrication Method [AARN]
- Extruded
- Fillet Radius Where Left Flange Joins Base Flange [AJGL]
- 0.125 Inches Nominal
- Fillet Radius Where Right Flange Joins Base Flange [AJGY]
- 0.125 Inches Nominal
- First Tip Style [CMZY]
- Square End
- Fourth Tip Relationship To Preceding Tips [CNQN]
- Identical W/First Tip
- Heat Treatment [HEAT]
- T-8511 Solution Heat Treated
- Material [MATT]
- Aluminum Alloy Ams-Qq-A-200/3, Alloy 2024
- Nondefinitive Spec/Std Data [ZZZT]
- Alloy 2024 And Temper T8511
- Outer Radius Where Left Flange Joins Base Flange [AJGM]
- 0.125 Inches Nominal
- Outer Radius Where Right Flange Joins Base Flange [AJGX]
- 0.125 Inches Nominal
- Left Inside Angle [CQHP]
- 90.0 Degrees Nominal
- Left Side Bottom Flange Thickness [BMPR]
- 0.060 Inches Nominal
- Left Side Distance To Center Of Both Flanges [BMPX]
- 1.750 Inches Nominal
- Left Side Flange Height [ADXJ]
- 1.100 Inches Nominal
- Left Side Flange Thickness [ADXL]
- 0.063 Inches Nominal
- Length [ABRY]
- 10.000 Feet Minimum And 12.000 Feet Maximum
- Right Side Bottom Flange Thickness [BMPQ]
- 0.060 Inches Nominal
- Right Side Distance To Center Of Both Flanges [BMPW]
- 1.750 Inches Nominal
- Right Side Flange Height [ADXK]
- 1.100 Inches Nominal
- Right Side Flange Thickness [ADXM]
- 0.134 Inches Nominal
- Right Inside Angle [CSQD]
- 90.0 Degrees Nominal
- Second Tip Relationship To First Tip [CNQJ]
- Identical
- Overall Width [ABMK]
- 3.500 Inches Nominal
- Weight Per Unit Measure [BRFD]
- 0.566 Pounds Per Linear Foot
- Third Tip Relationship To Preceding Tips [CNQL]
- Identical W/First Tip
Weapon Systems (WSDC) 9540-01-369-5549
DLA Procurement Analysis 9540-01-369-5549
Management Data 9540-01-369-5549
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of āLā or āFā, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 9540-01-369-5549
Freight Information 9540-01-369-5549
9540-01-369-5549 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 104850. A Sub NMFC of X. It has a NMFC Description of CHANNELS I/S NOI. 9540-01-369-5549 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 54000 which rates the freight between FCL and LCL. 9540-01-369-5549 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 576 for ocean manifesting and military sealift. 9540-01-369-5549 is not classified as a special type of cargo when transported by water. 9540-01-369-5549 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Procurement History 9540-01-369-5549 1 Records
Contracting Technical Data File (CTDF) 9540-01-369-5549 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- R
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: