Premium Information is available for this item - Upgrade for $1 a day
9540-01-363-6174
Structural Beam
9540013636174 013636174 60-19675/2024-T8511 1MA160B04-10386 QQ-A-200/3 ASTM B221 AMS-QQ-A-200/3 OT99817-13
A structural shape fabricated from a ferrous or nonferrous material and resembles the following cross-sectional forms: For the letter H, both flanges of the H section are equal or longer than the width measured along the axis of the web; for the letter I, a 16 2/3 percent slope on the inside face of the ferrous type flange, either one or both of the nonferrous type flanges are shorter than the length measured along the axis of the web; for the letters T and Z, on nonferrous type, the web is usually at right angles to the flanges. Letter H section may have a maximum of 5 percent slope on the inside face of the flanges. View more Structural Beam
May 2023
16
Marketplace 9540-01-363-6174
Request a Quotation from participating marketplace vendors
Related Documents 9540-01-363-6174 5+ Documents (More...)
AMS-QQ-A-200/3 ASTM B221 QQ-A-200/3 A AMS-QQ-A https//www.nsnlookup.com /fsg-95/fsc-9530/ca 9530-21
AMS-QQ-A-200/3 ASTM B221 QQ-A-200/3 A AMS-QQ-A https//www.nsnlookup.com /fsg-95/fsc-9530/us 9530-01-
Quotation QQ-A-200/3 BEAM ,STRUCTURAL AMS-QQ-A-200/3 BEAM,STRUCTURAL Quotation QQ-A-200/3 BEAM https
ASTM B221 QQ-A-200/3 A AMS-QQ-A-200/ -T8511 QQ-A-200/3 ASTM B221 10164540 9540PL0900332 https/
AMS-QQ-A-200/3 ASTM B221 QQ-A-200/3 A AMS-QQ-A-200/ -T8511 QQ-A-200/3 ASTM B221 10164540 9540PL0900332
,STRUCTURAL AMS-QQ-A-200/3 BEAM,STRUCTURAL AMS-QQ-A-200/3 BEAM,STRUCTURAL ,STRUCTURAL AMS-QQ-A-200/3
AMS-QQ-A-200/3 ANGLE,STRUCTURAL 2 EA NS Request Quotation Subscribe to View Vendor Details... 8579 ANGLE
QQ-A200/3 ANGLE,STRUCTURAL 567 EA NS Request Quotation AMS-QQ-A-200/3 ANGLE,STRUCTURAL 3 EA NS Request
/fsg-95/fsc-9540/ca 9540-21-872-1402 Special Shaped Structural Section 218721402 AMS-QQ-A-200/3 ASTM
Angle 9540217472008 217472008,HA.5 AMS-QQ-A-200/3 ASTM B221 QQ-A-200/3 A AMS-QQ-A-200/ -T8511 QQ-A-200
Restrictions 9540-01-363-6174
9540-01-363-6174 is a Structural Beam that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 9540-01-363-6174
- US Air Force (FGGI)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- FGKZ
- Brazil (YA01)
- Effective Date:
- 1 Jul 2001
Approved Sources 9540-01-363-6174
- Part Number
- Manufacturer
- Status
- 60-19675/2024-T8511
- Manufacturer
- 29321 - Transtar Metals Corp (Active)
- Incomplete Reference
- Incomplete Reference
- 1MA160B04-10386
- 76301 - The Boeing Company (Active)
- Incomplete Reference
- Incomplete Reference
- AMS-QQ-A-200/3
- 0U583 - Sae International (Active)
- Incomplete Reference
- Incomplete Reference
- QQ-A-200/3
- 81348 - Federal Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- ASTM B221
- 81346 - American Society For Testing And (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- AMS-QQ-A-200/3
- 81343 - Society Of Automotive Engineers Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- OT99817-13
- 0SNG6 - On-Tyme Metals (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 9540-01-363-6174
- Characteristic
- Specifications
- FIIG
- Specifications
- A13100
- Basic Shape Style [AGTA]
- T Shape
- Fabrication Method [AARN]
- Extruded
- Fillet Radius Where Top Left Flange Joins Web Flange/Leg [BPXJ]
- 0.090 Inches Nominal
- Fillet Radius Where Top Right Flange Joins Web Flange/Leg [BPXL]
- 0.090 Inches Nominal
- First Tip Style [CMZY]
- Square End
- Heat Treatment [HEAT]
- T-8511 Solution Heat Treated
- Material [MATT]
- Aluminum Alloy Ams-Qq-A-200/3, Alloy 2024
- Nondefinitive Spec/Std Data [ZZZT]
- Alloy 2024 And Temper T8511
- Left Side Top Flange Distance To Center Of Both Flanges [BPXD]
- 0.765 Inches Nominal
- Left Side Top Flange Thickness [ADXR]
- 0.070 Inches Nominal
- Left Top Inside Angle [CSMZ]
- 90.0 Degrees Nominal
- Leg Thickness [AJJP]
- 0.110 Inches Nominal
- Length [ABRY]
- 10.000 Feet Minimum And 12.000 Feet Maximum
- Right Side Top Flange Distance To Center Of Both Flanges [BPXG]
- 0.765 Inches Nominal
- Right Side Top Flange Thickness [ADXS]
- 0.070 Inches Nominal
- Right Top Inside Angle [CRZC]
- 90.0 Degrees Nominal
- Second Tip Relationship To First Tip [CNQJ]
- Identical
- Overall Height [ABKW]
- 1.820 Inches Nominal
- Top Flange Width [BQJG]
- 1.530 Inches Nominal
- Weight Per Unit Measure [BRFD]
- 0.361 Pounds Per Linear Foot
- Third Tip Relationship To Preceding Tips [CNQL]
- Identical W/First Tip
Weapon Systems (WSDC) 9540-01-363-6174
DLA Procurement Analysis 9540-01-363-6174
Management Data 9540-01-363-6174
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of āLā or āFā, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 9540-01-363-6174
Freight Information 9540-01-363-6174
9540-01-363-6174 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 104420. A Sub NMFC of X. It has a NMFC Description of BEAMS NOI I/S. 9540-01-363-6174 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 53800 which rates the freight between FCL and LCL. 9540-01-363-6174 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 576 for ocean manifesting and military sealift. 9540-01-363-6174 is not classified as a special type of cargo when transported by water. 9540-01-363-6174 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 9540-01-363-6174
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- --
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- No Requirement
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
- No Requirement
Procurement History 9540-01-363-6174 1 Records
Contracting Technical Data File (CTDF) 9540-01-363-6174 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- R
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: