Premium Information is available for this item - Upgrade for $1 a day
9540-01-363-4318
Structural Beam
9540013634318 013634318 AMS-QQ-A-200/11 1MA180D03-10005 10139-0404 ASTM B221 QQ-A-200/11
A structural shape fabricated from a ferrous or nonferrous material and resembles the following cross-sectional forms: For the letter H, both flanges of the H section are equal or longer than the width measured along the axis of the web; for the letter I, a 16 2/3 percent slope on the inside face of the ferrous type flange, either one or both of the nonferrous type flanges are shorter than the length measured along the axis of the web; for the letters T and Z, on nonferrous type, the web is usually at right angles to the flanges. Letter H section may have a maximum of 5 percent slope on the inside face of the flanges. View more Structural Beam
May 2023
16
Marketplace 9540-01-363-4318
Request a Quotation from participating marketplace vendors
Updated Every Day Updated Every Day 
Updated Every Day Related Documents 9540-01-363-4318 5+ Documents (More...)
Request AMS-QQ-A -200/11 / // AMS-QQ-A / / AMS-QQ-A -200 /11 11 - - BAR, AMS-QQ-A-200/11 BAR
BAR, ASTM-B221 https// BAR NS https // BAR NS AMS-QQ-A AMS-QQ-A-200/11 BAR 011910635AMS-QQ-A ASTM-B221
/ / AMS-QQ-A -200 /11 11 - - AMS-QQ-A-200 /11 Section 014962539 / / AMS-QQ-A -200 /11 11 - - AMS-QQ-A
Structural Beam 9540013634318 013634318 Request AMS-QQ-A -200/11 / // AMS-QQ-A / / AMS-QQ-A -200
BAR, AMS-QQ-A-200/11 BAR BAR AMS-QQ-A-200/11 /11 BAR BAR , ASTM-B221 006106891 BAR, AMS-QQ-A - 200/11
BAR BAR AMS-QQ-A-200/11 /11 BAR BAR, ASTM-B221 006106891 BAR, AMS-QQ-A - 200/11 BAR, AMS-QQ-A
BAR 011937057 , AMS-QQ-A -200/11 https//www.nsnlookup.com AMS-QQ-A-200/11 BAR BAR, ASTM-B221 BAR 011937057
BAR, AMS-QQ-A-200/11 BAR BAR AMS-QQ-A- 200/11 BAR BAR BAR , ASTM-B221 Request ASTM , AMS-QQ-A-200 /11
-200/11 BAR BAR BAR AMS-QQ-A-200/11 BAR BAR, ASTM-B221 BAR, AMS-QQ-A-200/11 BAR BAR AMS-QQ-A- 200/11
BAR, AMS-QQ-A-200 /11 BAR BAR, ASTM-B221 , ASTM-B221 BAR, AMS-QQ-A-200/11 https//www.nsnlookup.com ,
Restrictions 9540-01-363-4318
9540-01-363-4318 is a Structural Beam that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 9540-01-363-4318
- US Air Force (FGGI)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- FGKZ
Approved Sources 9540-01-363-4318
- Part Number
- Manufacturer
- Status
- AMS-QQ-A-200/11
- Manufacturer
- 0U583 - Sae International (Active)
- Incomplete Reference
- Incomplete Reference
- 1MA180D03-10005
- 76301 - The Boeing Company (Active)
- Incomplete Reference
- Incomplete Reference
- 10139-0404
- 29321 - Transtar Metals Corp (Active)
- Primary Buy
- Primary Buy
- ASTM B221
- 81346 - American Society For Testing And (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- AMS-QQ-A-200/11
- 81343 - Society Of Automotive Engineers Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- QQ-A-200/11
- 81348 - Federal Specifications Promulgated (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 9540-01-363-4318
- Characteristic
- Specifications
- FIIG
- Specifications
- A13100
- Basic Shape Style [AGTA]
- Z Shape
- Bottom Flange Width [BQJH]
- 0.750 Inches Nominal
- Fabrication Method [AARN]
- Extruded
- Fillet Radius Where Bottom Right Flange Joins Web Flange/Leg [BPXM]
- 0.125 Inches Nominal
- Fillet Radius Where Top Left Flange Joins Web Flange/Leg [BPXJ]
- 0.125 Inches Nominal
- First Tip Radius [AJJB]
- 0.062 Inches Nominal
- First Tip Style [CMZY]
- Lower Radius
- Heat Treatment [HEAT]
- T-6511 Solution Heat Treated
- Material [MATT]
- Aluminum Alloy Ams-Qq-A-200/11, Alloy 7075
- Nondefinitive Spec/Std Data [ZZZT]
- Alloy 7075 And Temper T6511
- Left Side Top Flange Thickness [ADXR]
- 0.062 Inches Nominal
- Left Top Inside Angle [CSMZ]
- 90.0 Degrees Nominal
- Length [ABRY]
- 10.000 Feet Minimum And 12.000 Feet Maximum
- Right Side Bottom Flange Thickness [BMPQ]
- 0.062 Inches Nominal
- Right Bottom Inside Angle [CWKK]
- 90.0 Degrees Nominal
- Second Tip Radius [CMZZ]
- 0.062 Inches Nominal
- Second Tip Relationship To First Tip [CNQJ]
- Not Identical
- Second Tip Style [CNQK]
- Upper Radius
- Overall Height [ABKW]
- 0.500 Inches Nominal
- Top Flange Width [BQJG]
- 0.750 Inches Nominal
- Weight Per Unit Measure [BRFD]
- 0.318 Pounds Per Linear Foot
- Web Flange Thickness [BPXN]
- 0.062 Inches Nominal
Weapon Systems (WSDC) 9540-01-363-4318
DLA Procurement Analysis 9540-01-363-4318
Management Data 9540-01-363-4318
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Similar Supply Items to 9540-01-363-4318
Freight Information 9540-01-363-4318
9540-01-363-4318 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 104420. A Sub NMFC of X. It has a NMFC Description of BEAMS NOI I/S. 9540-01-363-4318 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 53800 which rates the freight between FCL and LCL. 9540-01-363-4318 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 576 for ocean manifesting and military sealift. 9540-01-363-4318 is not classified as a special type of cargo when transported by water. 9540-01-363-4318 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 9540-01-363-4318
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- --
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- No Requirement
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
- No Requirement
Procurement History 9540-01-363-4318 2 Records
Contracting Technical Data File (CTDF) 9540-01-363-4318 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- R
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: