Premium Information is available for this item - Upgrade for $1 a day
9540-01-303-7842
Structural Beam
9540013037842 013037842 AMS-QQ-A-200/3 10138-2402 AND10138-2402 QQ-A-200/3
A structural shape fabricated from a ferrous or nonferrous material and resembles the following cross-sectional forms: For the letter H, both flanges of the H section are equal or longer than the width measured along the axis of the web; for the letter I, a 16 2/3 percent slope on the inside face of the ferrous type flange, either one or both of the nonferrous type flanges are shorter than the length measured along the axis of the web; for the letters T and Z, on nonferrous type, the web is usually at right angles to the flanges. Letter H section may have a maximum of 5 percent slope on the inside face of the flanges. View more Structural Beam
June 2023
10
Marketplace 9540-01-303-7842
Request a Quotation from participating marketplace vendors
Related Documents 9540-01-303-7842 5+ Documents (More...)
AMS-QQ-A-200/3 BEAM,STRUCTURAL 3 FT NS Request Quotation Updated Every Day 9540-01-303-7842 RQST NE
A structural shape AMS-QQ-A-200/3 https - AMS-QQ-A-200/3 https T4-0.094X1.750X12QQ-A-200/3AMS-QQ-A
AMS-QQ-A-200/3 CHANNEL,STRUCTURAL 2 FT NS Request Quotation Subscribe to View Vendor Details...
https - AMS-QQ-A -200/3 https AND10137-1604 AND10137 A structural - AMS-QQ-A-200/3 https AND10137
AMS-QQ-A-200/3 BAR,METAL 2 FT NS Request Quotation Subscribe to View Vendor Details...
QQ-A-200/3 BAR,METAL 1 FT NS Request Quotation ASTM-B-221 BAR,METAL 2 FT NS Request Quotation AMS-QQ-A
-200/3 ANGLE,STRUCTURAL 1 EA NS Request Quotation AMS-QQ-A-200/3 https - AMS-QQ-A-200/3 https https//
https - AMS-QQ-A-200/3 https https//www.nsnlookup.com -T4-0.094X1.750X12QQ-A-200/3AMS-QQ-A-200
ANGLE,STRUCTURAL 1 EA NS Request Quotation AMS-QQ-A-200/3 ANGLE Quotation AMS-QQ-A-200/3 ANGLE
QQ-A-200/3 ANGLE,STRUCTURAL 1 EA NS Request Quotation AMS-QQ-A-200/3 https - AMS-QQ-A-200/3 https https
Restrictions 9540-01-303-7842
9540-01-303-7842 is a Structural Beam that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 9540-01-303-7842
- Brazil (YA01)
- Effective Date:
- 1 Jul 2001
Approved Sources 9540-01-303-7842
- Part Number
- Manufacturer
- Status
- AMS-QQ-A-200/3
- Manufacturer
- 0U583 - Sae International (Active)
- Incomplete Reference
- Incomplete Reference
- 10138-2402
- 29321 - Transtar Metals Corp (Active)
- Incomplete Reference
- Incomplete Reference
- AND10138-2402
- 99237 - Airforce-Navy Aeronautical Design (Active)
- Incomplete Standard
- Incomplete Standard
- AMS-QQ-A-200/3
- 81343 - Society Of Automotive Engineers Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- QQ-A-200/3
- 81348 - Federal Specifications Promulgated (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 9540-01-303-7842
- Characteristic
- Specifications
- FIIG
- Specifications
- A13100
- Basic Shape Style [AGTA]
- Z Shape
- Bottom Flange Width [BQJH]
- 0.875 Inches Nominal
- Fabrication Method [AARN]
- Extruded
- Fillet Radius Where Bottom Right Flange Joins Web Flange/Leg [BPXM]
- 0.125 Inches Nominal
- Fillet Radius Where Top Left Flange Joins Web Flange/Leg [BPXJ]
- 0.125 Inches Nominal
- First Tip Radius [AJJB]
- 0.078 Inches Nominal
- First Tip Style [CMZY]
- Lower Radius
- Heat Treatment [HEAT]
- T-81 Solution Heat Treated
- Material Document And Classification [MDCL]
- Qq-A-200/3 Fed Spec 1St Material Response
- Material [MATT]
- Aluminum Alloy 2024
- Nondefinitive Spec/Std Data [ZZZT]
- T81 Temper
- Left Side Top Flange Thickness [ADXR]
- 0.078 Inches Nominal
- Left Top Inside Angle [CSMZ]
- 90.0 Degrees Nominal
- Length [ABRY]
- 10.000 Feet Minimum And 12.000 Feet Maximum
- Right Side Bottom Flange Thickness [BMPQ]
- 0.078 Inches Nominal
- Right Bottom Inside Angle [CWKK]
- 90.0 Degrees Nominal
- Second Tip Radius [CMZZ]
- 0.078 Inches Nominal
- Second Tip Relationship To First Tip [CNQJ]
- Not Identical
- Second Tip Style [CNQK]
- Upper Radius
- Overall Height [ABKW]
- 2.500 Inches Nominal
- Top Flange Width [BQJG]
- 0.875 Inches Nominal
- Weight Per Unit Measure [BRFD]
- 0.388 Pounds Per Linear Foot
- Web Flange Thickness [BPXN]
- 0.078 Inches Nominal
Weapon Systems (WSDC) 9540-01-303-7842
DLA Procurement Analysis 9540-01-303-7842
Management Data 9540-01-303-7842
Similar Supply Items to 9540-01-303-7842
Freight Information 9540-01-303-7842
9540-01-303-7842 has freight characteristics.. 9540-01-303-7842 has a variance between NMFC and UFC when transported by rail and the description should be consulted.