Premium Information is available for this item - Upgrade for $1 a day
9540-01-300-0476
Structural Beam
9540013000476 013000476 AND10140-2001 AMS-QQ-A-200/3 QQ-A-200/3
A structural shape fabricated from a ferrous or nonferrous material and resembles the following cross-sectional forms: For the letter H, both flanges of the H section are equal or longer than the width measured along the axis of the web; for the letter I, a 16 2/3 percent slope on the inside face of the ferrous type flange, either one or both of the nonferrous type flanges are shorter than the length measured along the axis of the web; for the letters T and Z, on nonferrous type, the web is usually at right angles to the flanges. Letter H section may have a maximum of 5 percent slope on the inside face of the flanges. View more Structural Beam
January 2023
7
Marketplace 9540-01-300-0476
Request a Quotation from participating marketplace vendors
Related Documents 9540-01-300-0476 5+ Documents (More...)
AMS-QQ-A-200/3 BEAM,STRUCTURAL 2 EA NS Request Quotation Subscribe to View Vendor Details...
AMS-QQ-A-200/3 STRUCTURE 3 EA NS Request Quotation QQ-A-200/3 STRUCTURE 1 EA NS Request Quotation QQ-A200
AMS-QQ-A-200/3 BEAM,STRUCTURAL 3 EA NS Request Quotation Updated Every Day 9540-00-528-9318 RQST NE
/fsg-95/fsc-9540/us 9540-01-300-0476 Structural Beam 9540013000476 013000476 AMS-QQ-A-200/3 BEAM,STRUCTURAL
AMS-QQ-A-200/3 BEAM,STRUCTURAL 2 FT NS Request Quotation Subscribe to View Vendor Details...
AMS-QQ-A-200/3 BEAM,STRUCTURAL 3 FT NS Request Quotation Subscribe to View Vendor Details...
/fsg-95/fsc-9540/us 9540-01-300-0476 Structural Beam 9540013000476 013000476 AMS-QQ-A-200/3 BEAM,STRUCTURAL
A structural shape AMS-QQ-A-200/3 https - AMS-QQ-A-200/3 https T4-0.094X1.750X12QQ-A-200/3AMS-QQ-A
AMS-QQ-A-200/3 CHANNEL,STRUCTURAL 2 EA NS Request Quotation Subscribe to View Vendor Details..
AMS-QQ-A-200/3 ANGLE,STRUCTURAL 2 EA NS Request Quotation Subscribe to View Vendor Details...
Restrictions 9540-01-300-0476
9540-01-300-0476 is a Structural Beam that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 9540-01-300-0476
- Brazil (YA01)
- Effective Date:
- 1 Jul 2001
Approved Sources 9540-01-300-0476
- Part Number
- Manufacturer
- Status
- AMS-QQ-A-200/3
- Manufacturer
- 0U583 - Sae International (Active)
- Incomplete Reference
- Incomplete Reference
- AND10140-2001
- 99237 - Airforce-Navy Aeronautical Design (Active)
- Incomplete Standard
- Incomplete Standard
- AMS-QQ-A-200/3
- 81343 - Society Of Automotive Engineers Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- QQ-A-200/3
- 81348 - Federal Specifications Promulgated (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 9540-01-300-0476
- Characteristic
- Specifications
- FIIG
- Specifications
- A13100
- Basic Shape Style [AGTA]
- I Shape
- Bottom Flange Width [BQJH]
- 2.000 Inches Nominal
- Fabrication Method [AARN]
- Extruded
- Fillet Radius Where Bottom Left Flange Joins Web Flange/Leg [BPXK]
- 0.125 Inches Nominal
- Fillet Radius Where Bottom Right Flange Joins Web Flange/Leg [BPXM]
- 0.125 Inches Nominal
- Fillet Radius Where Top Left Flange Joins Web Flange/Leg [BPXJ]
- 0.125 Inches Nominal
- Fillet Radius Where Top Right Flange Joins Web Flange/Leg [BPXL]
- 0.125 Inches Nominal
- First Tip Radius [AJJB]
- 0.094 Inches Nominal
- First Tip Style [CMZY]
- Lower Radius
- Fourth Tip Relationship To Preceding Tips [CNQN]
- Identical W/Third Tip
- Heat Treatment [HEAT]
- O-Annealed
- Material Document And Classification [MDCL]
- Qq-A-200/3 Fed Spec 1St Material Response
- Material [MATT]
- Aluminum Alloy 2024
- Nondefinitive Spec/Std Data [ZZZT]
- To Temper
- Left Side Bottom Flange Distance To Center Of Both Flanges [BPXF]
- 1.000 Inches Nominal
- Left Side Bottom Flange Thickness [BMPR]
- 0.094 Inches Nominal
- Left Side Top Flange Distance To Center Of Both Flanges [BPXD]
- 1.000 Inches Nominal
- Left Bottom Inside Angle [CTBR]
- 90.0 Degrees Nominal
- Left Side Top Flange Thickness [ADXR]
- 0.094 Inches Nominal
- Left Top Inside Angle [CSMZ]
- 90.0 Degrees Nominal
- Length [ABRY]
- 10.000 Feet Minimum And 12.000 Feet Maximum
- Right Side Bottom Flange Distance To Center Of Both Flanges [BPXH]
- 1.000 Inches Nominal
- Right Side Bottom Flange Thickness [BMPQ]
- 0.094 Inches Nominal
- Right Side Top Flange Distance To Center Of Both Flanges [BPXG]
- 1.000 Inches Nominal
- Right Side Top Flange Thickness [ADXS]
- 0.094 Inches Nominal
- Right Top Inside Angle [CRZC]
- 90.0 Degrees Nominal
- Right Bottom Inside Angle [CWKK]
- 90.0 Degrees Nominal
- Second Tip Relationship To First Tip [CNQJ]
- Identical
- Overall Height [ABKW]
- 2.000 Inches Nominal
- Top Flange Width [BQJG]
- 2.000 Inches Nominal
- Web Flange Thickness [BPXN]
- 0.094 Inches Nominal
- Third Tip Radius [CNBB]
- 0.094 Inches Nominal
- Third Tip Relationship To Preceding Tips [CNQL]
- Not Identical
- Third Tip Style [CNQM]
- Upper Radius
Similar Supply Items to 9540-01-300-0476
Freight Information 9540-01-300-0476
9540-01-300-0476 has freight characteristics.. 9540-01-300-0476 has a variance between NMFC and UFC when transported by rail and the description should be consulted.