Premium Information is available for this item - Upgrade for $1 a day
9540-01-298-6998
Structural Beam
9540012986998 012986998 34000130-7
A structural shape fabricated from a ferrous or nonferrous material and resembles the following cross-sectional forms: For the letter H, both flanges of the H section are equal or longer than the width measured along the axis of the web; for the letter I, a 16 2/3 percent slope on the inside face of the ferrous type flange, either one or both of the nonferrous type flanges are shorter than the length measured along the axis of the web; for the letters T and Z, on nonferrous type, the web is usually at right angles to the flanges. Letter H section may have a maximum of 5 percent slope on the inside face of the flanges. View more Structural Beam
May 2023
6
Marketplace 9540-01-298-6998
Request a Quotation from participating marketplace vendors
Related Documents 9540-01-298-6998 1+ Documents (More...)
) 3/5 NSN 9540-01-298-6998 (Identification) 4/5 NSN 9540-01-298-6998 (Identification) 5/5 - - - - - 1
BUY NE FedMall Updated Every Day 9540-01-298-6998 RQST NE Updated Every Day 9540-01-298-6998 RQST
Restrictions 9540-01-298-6998
9540-01-298-6998 is a Structural Beam that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 9540-01-298-6998
- US Navy (N9BZ)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- N9ZD
- Supplementary Collaborators:
- KE
Approved Sources 9540-01-298-6998
- Part Number
- Manufacturer
- Status
- 34000130-7
- Manufacturer
- 24995 - Becklin Holdings, Inc. (Active)
- Incomplete Reference
- Incomplete Reference
Datasheet 9540-01-298-6998
- Characteristic
- Specifications
- FIIG
- Specifications
- A13100
- Basic Shape Style [AGTA]
- H Shape
- Fabrication Method [AARN]
- Extruded
- First Tip Style [CMZY]
- Square End
- Fourth Tip Relationship To Preceding Tips [CNQN]
- Not Identical
- Fourth Tip Style [CNQP]
- Right Taper Length
- Fourth Tip Taper Length [CNPH]
- 0.200 Inches Nominal
- Fourth Tip Thickness [CNPX]
- 0.063 Inches Nominal
- Heat Treatment [HEAT]
- T-52 Solution Heat Treated
- Material Document And Classification [MDCL]
- Qq-A-200/9 Fed Spec 1St Material Response
- Material [MATT]
- Aluminum Alloy 6063
- Left Side Bottom Flange Distance To Center Of Both Flanges [BPXF]
- 0.510 Inches Nominal
- Left Side Flange Height [ADXJ]
- 1.160 Inches Nominal
- Left Side Flange Thickness [ADXL]
- 0.093 Inches Nominal
- Left Side Top Flange Distance To Center Of Both Flanges [BPXD]
- 0.750 Inches Nominal
- Left Bottom Inside Angle [CTBR]
- 90.0 Degrees Nominal
- Left Top Inside Angle [CSMZ]
- 90.0 Degrees Nominal
- Length [ABRY]
- 16.000 Feet Nominal
- Right Side Bottom Flange Distance To Center Of Both Flanges [BPXH]
- 0.510 Inches Nominal
- Right Side Flange Height [ADXK]
- 1.160 Inches Nominal
- Right Side Flange Thickness [ADXM]
- 0.093 Inches Nominal
- Right Side Top Flange Distance To Center Of Both Flanges [BPXG]
- 0.750 Inches Nominal
- Right Top Inside Angle [CRZC]
- 90.0 Degrees Nominal
- Right Bottom Inside Angle [CWKK]
- 90.0 Degrees Nominal
- Second Tip Inner Radius [CNBF]
- 0.020 Inches Nominal
- Second Tip Outer Radius [CNBK]
- 0.020 Inches Nominal
- Second Tip Relationship To First Tip [CNQJ]
- Not Identical
- Second Tip Style [CNQK]
- Square W/ Inner And Outer Corner Radii
- Special Features [FEAT]
- 2Nd Tip Offset 0.093 In. Outside; Bottom Flanges 0.080 In. Thk,13.0667 Deg Taper Tips; Tensile Strength 22000 Psi Min,30000 Psi Max; Hardness Webster Scale 8.0 Min,11.0 Max; Dp Matte Fin.; Fillet Radius Where Bottom Left Flange Joins Web Flange,0.046 In.; Fillet Radius Where Bottom Right Flange Joins Web Flange,0.046 In.
- Overall Width [ABMK]
- 0.375 Inches Nominal
- Web Flange Thickness [BPXN]
- 0.250 Inches Nominal
- Surface Treatment [SFTT]
- Anodize
- Third Tip Style [CNQM]
- Left Taper Length
- Third Tip Relationship To Preceding Tips [CNQL]
- Not Identical
- Third Tip Taper Length [CNPG]
- 0.200 Inches Nominal
- Third Tip Thickness [CNPW]
- 0.063 Inches Nominal
DLA Procurement Analysis 9540-01-298-6998
Management Data 9540-01-298-6998
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 9540-01-298-6998
Freight Information 9540-01-298-6998
9540-01-298-6998 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 104420. A Sub NMFC of X. It has a NMFC Description of BEAMS NOI I/S. 9540-01-298-6998 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 53800 which rates the freight between FCL and LCL. 9540-01-298-6998 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 576 for ocean manifesting and military sealift. 9540-01-298-6998 is not classified as a special type of cargo when transported by water. 9540-01-298-6998 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 9540-01-298-6998 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- T
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: