Premium Information is available for this item - Upgrade for $1 a day
9540-01-281-7897
Structural Beam
9540012817897 012817897 SAE-AMS-QQ-A-200/8 AND10136-2008 AMS-QQ-A-200/8 QQ-A-200/8
A structural shape fabricated from a ferrous or nonferrous material and resembles the following cross-sectional forms: For the letter H, both flanges of the H section are equal or longer than the width measured along the axis of the web; for the letter I, a 16 2/3 percent slope on the inside face of the ferrous type flange, either one or both of the nonferrous type flanges are shorter than the length measured along the axis of the web; for the letters T and Z, on nonferrous type, the web is usually at right angles to the flanges. Letter H section may have a maximum of 5 percent slope on the inside face of the flanges. View more Structural Beam
June 2023
8
Marketplace 9540-01-281-7897
Request a Quotation from participating marketplace vendors
Updated Every 15 Minutes 
Updated Every Day Updated Every Day 
Updated Every Day Related Documents 9540-01-281-7897 5+ Documents (More...)
QQA200 -8 AMS-QQ-A -200/8 QQA200 -8 AMS-QQ-A -200/8 A structural 28 - SAE-AMS-QQ-A -200 /8 Quotation
Quotation SAE AMS-QQ-A-200/8 A SAE-AMS-QQ-A-200 /8SAE-AMS-QQ-A-200/8 https//www.nsnlookup.com
Quotation FedMall Updated Every 15 Minutes 9540-01-071 https//www.nsnlookup.com /fsg-95/fsc-9540/us 9540-01-281-7897
Structural Beam 9540012817897 012817897 your Account Upgrade 9540-01-281-7897Structural Beam9540012817897
/8SAE-AMS-QQ-A 012792363 Quotation SAE AMS-QQ-A-200/8 A SAE-AMS-QQ-A-200/8SAE-AMS-QQ-A Structural Beam
Quotation https// METAL SAE-AMS-QQ-A -200/ 8 https// METAL SAE-AMS-QQ-A Quotation SAE-AMS-QQ-A
734RR SAE-AMS-QQ-A -200/8 QQA200 SAE-AMS-QQ-A-200/8 QQA200 https//www.nsnlookup.com /fsg-95/fsc-9525
SAE-AMS-QQ-A -200/8 QQA200 https METAL QQA200 734RR SAE-AMS-QQ-A -200/8 QQA200 SAE-AMS-QQ-A -200/8 QQA200
ASTM-B221SAE-AMS-QQ-A -200/ 8 Quotation SAE-AMS-QQ-A -200/8 Quotation ASTM-B221SAE-AMS-QQ-A -200 /8
Quotation SAE-AMS-QQ-A -200/8 Quotation ASTM-B221 Quotation ASTM-B221 SAE-AMS-QQ-A -200/8 Quotation
Restrictions 9540-01-281-7897
9540-01-281-7897 is a Structural Beam that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 9540-01-281-7897
- US Army (A920)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- A186
- US Air Force (FGGI)
- Effective Date:
- 1 Mar 2006
Approved Sources 9540-01-281-7897
- Part Number
- Manufacturer
- Status
- SAE-AMS-QQ-A-200/8
- Manufacturer
- 0U583 - Sae International (Active)
- Incomplete Reference
- Incomplete Reference
- AND10136-2008
- 99237 - Airforce-Navy Aeronautical Design (Active)
- Incomplete Standard
- Incomplete Standard
- AMS-QQ-A-200/8
- 0U583 - Sae International (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- AMS-QQ-A-200/8
- 81343 - Society Of Automotive Engineers Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- QQ-A-200/8
- 81348 - Federal Specifications Promulgated (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 9540-01-281-7897
- Characteristic
- Specifications
- FIIG
- Specifications
- A13100
- Basic Shape Style [AGTA]
- T Shape
- Fabrication Method [AARN]
- Extruded
- Fillet Radius Where Top Left Flange Joins Web Flange/Leg [BPXJ]
- 0.125 Inches Nominal
- Fillet Radius Where Top Right Flange Joins Web Flange/Leg [BPXL]
- 0.125 Inches Nominal
- First Tip Radius [AJJB]
- 0.125 Inches Nominal
- First Tip Style [CMZY]
- Lower Radius
- Heat Treatment [HEAT]
- T-6 Solution Heat Treated
- Material [MATT]
- Aluminum Alloy Ams-Qq-A-200/8, Alloy 6061
- Nondefinitive Spec/Std Data [ZZZT]
- T6 Temper
- Left Side Top Flange Distance To Center Of Both Flanges [BPXD]
- 1.000 Inches Nominal
- Left Side Top Flange Thickness [ADXR]
- 0.125 Inches Nominal
- Left Top Inside Angle [CSMZ]
- 90.0 Degrees Nominal
- Leg Thickness [AJJP]
- 0.125 Inches Nominal
- Length [ABRY]
- 10.000 Feet Minimum And 12.000 Feet Maximum
- Right Side Top Flange Distance To Center Of Both Flanges [BPXG]
- 1.000 Inches Nominal
- Right Side Top Flange Thickness [ADXS]
- 0.125 Inches Nominal
- Right Top Inside Angle [CRZC]
- 90.0 Degrees Nominal
- Second Tip Relationship To First Tip [CNQJ]
- Identical
- Overall Height [ABKW]
- 1.750 Inches Nominal
- Top Flange Width [BQJG]
- 2.000 Inches Nominal
- Third Tip Radius [CNBB]
- 0.062 Inches Nominal
- Third Tip Style [CNQM]
- Full Radius
- Third Tip Relationship To Preceding Tips [CNQL]
- Not Identical
Weapon Systems (WSDC) 9540-01-281-7897
DLA Procurement Analysis 9540-01-281-7897
Management Data 9540-01-281-7897
Army
- Materiel Category and Inventory Manager:
- J
- Ground Forces Support Materiel (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Similar Supply Items to 9540-01-281-7897
Freight Information 9540-01-281-7897
9540-01-281-7897 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 104420. A Sub NMFC of X. It has a NMFC Description of BEAMS NOI I/S. 9540-01-281-7897 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 53800 which rates the freight between FCL and LCL. 9540-01-281-7897 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 576 for ocean manifesting and military sealift. 9540-01-281-7897 is not classified as a special type of cargo when transported by water. 9540-01-281-7897 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 9540-01-281-7897
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- --
- A-A-1898, Grade II, Water Resistant Cellulosic Cushioning
- --
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Contracting Technical Data File (CTDF) 9540-01-281-7897 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- L
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: