Premium Information is available for this item - Upgrade for $1 a day
9540-01-251-0815
Structural Beam
9540012510815 012510815 1MT360A01-10011 MIL-T-81556
A structural shape fabricated from a ferrous or nonferrous material and resembles the following cross-sectional forms: For the letter H, both flanges of the H section are equal or longer than the width measured along the axis of the web; for the letter I, a 16 2/3 percent slope on the inside face of the ferrous type flange, either one or both of the nonferrous type flanges are shorter than the length measured along the axis of the web; for the letters T and Z, on nonferrous type, the web is usually at right angles to the flanges. Letter H section may have a maximum of 5 percent slope on the inside face of the flanges. View more Structural Beam
May 2023
5
Marketplace 9540-01-251-0815
Request a Quotation from participating marketplace vendors
Related Documents 9540-01-251-0815 5+ Documents (More...)
MIL-T-81556 BEAM,STRUCTURAL 9 FT NS Request Quotation FedMall Updated Every 15 Minutes 9540-01-251-0815
BUY NE FedMall Updated Every Day 9540-01-251-0815 RQST NE Updated Every Day 9540-01-251-0815 RQST Updated
MIL-T-81556 ANGLE,STRUCTURAL 9 FT NS Request Quotation Updated Every Day 9540-01-445-7866 RQST
MIL-T-81556 BEAM,STRUCTURAL 9 FT NS Request Quotation FedMall Updated Every 15 Minutes 9540-01-
MIL-T-81556 STRUCTURAL SECTION,SPECIAL SHAPED 9 FT NS Request Quotation Updated Every Day 9540-01-428
MIL-T-81556 ANGLE,STRUCTURAL 9 FT NS Request Quotation Updated Every Day 9540-01-438-7991 RQST
MIL-T-81556 ANGLE,STRUCTURAL 9 FT NS Request Quotation Updated Every Day 9540-01-445-7873 RQST
NE Updated ANGLE,STRUCTURAL 9 FT NS Request Quotation Updated Every Day 9540-01-445-7866 RQST MIL-T-81556
MIL-T-81556 STRUCTURAL SECTION,SPECIAL SHAPED 9 FT NS Request Quotation Updated Every Day 9540-01-428
STRUCTURAL SECTION,SPECIAL SHAPED 9 FT NS Request Quotation Updated Every Day 9540-01-428 MIL-T-81556
Restrictions 9540-01-251-0815
9540-01-251-0815 is a Structural Beam that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 9540-01-251-0815
- US Air Force (FGGI)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- FGKZ
Approved Sources 9540-01-251-0815
- Part Number
- Manufacturer
- Status
- 1MT360A01-10011
- Manufacturer
- 76301 - The Boeing Company (Active)
- Incomplete Reference
- Incomplete Reference
- MIL-T-81556
- 81349 - Military Specifications (Active)
- Incomplete Standard
- Incomplete Standard
Datasheet 9540-01-251-0815
- Characteristic
- Specifications
- FIIG
- Specifications
- A13100
- Basic Shape Style [AGTA]
- T Shape
- Fabrication Method [AARN]
- Extruded
- Fillet Radius Where Top Left Flange Joins Web Flange/Leg [BPXJ]
- 0.250 Inches Nominal
- Fillet Radius Where Top Right Flange Joins Web Flange/Leg [BPXL]
- 0.250 Inches Nominal
- First Tip Inner Radius [CNBD]
- 0.090 Inches Nominal
- First Tip Outer Radius [CNBJ]
- 0.090 Inches Nominal
- First Tip Style [CMZY]
- Square W/ Inner And Outer Corner Radii
- Heat Treatment [HEAT]
- Annealed
- Material [MATT]
- Titanium,Mil-T-81556,Type 3,Comp A
- Nondefinitive Spec/Std Data [ZZZT]
- A Composition And 3 Type
- Left Side Top Flange Distance To Center Of Both Flanges [BPXD]
- 0.975 Inches Nominal
- Left Side Top Flange Thickness [ADXR]
- 0.350 Inches Nominal
- Left Top Inside Angle [CSMZ]
- 90.0 Degrees Nominal
- Leg Thickness [AJJP]
- 0.250 Inches Nominal
- Length [ABRY]
- 10.000 Feet Minimum And 12.000 Feet Maximum
- Right Side Top Flange Distance To Center Of Both Flanges [BPXG]
- 2.125 Inches Nominal
- Right Side Top Flange Thickness [ADXS]
- 0.350 Inches Nominal
- Right Top Inside Angle [CRZC]
- 90.0 Degrees Nominal
- Second Tip Relationship To First Tip [CNQJ]
- Identical
- Overall Height [ABKW]
- 2.300 Inches Nominal
- Special Features [FEAT]
- Machined All Over
- Top Flange Width [BQJG]
- 3.100 Inches Nominal
- Third Tip Relationship To Preceding Tips [CNQL]
- Identical W/First Tip
DLA Procurement Analysis 9540-01-251-0815
Management Data 9540-01-251-0815
Similar Supply Items to 9540-01-251-0815
Freight Information 9540-01-251-0815
9540-01-251-0815 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 104420. A Sub NMFC of X. It has a NMFC Description of BEAMS NOI I/S. 9540-01-251-0815 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 53800 which rates the freight between FCL and LCL. 9540-01-251-0815 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 576 for ocean manifesting and military sealift. 9540-01-251-0815 is not classified as a special type of cargo when transported by water. 9540-01-251-0815 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 9540-01-251-0815
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- No Requirements
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- No Requirement
- Special requirements
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
- No Requirement
Contracting Technical Data File (CTDF) 9540-01-251-0815 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: