Premium Information is available for this item - Upgrade for $1 a day
9540-01-199-4602
Structural Beam
9540011994602 011994602 AMS-QQ-A-200/15 1MA180D06-10007 10138-0403 AND10138-0403 QQ-A-200/15
A structural shape fabricated from a ferrous or nonferrous material and resembles the following cross-sectional forms: For the letter H, both flanges of the H section are equal or longer than the width measured along the axis of the web; for the letter I, a 16 2/3 percent slope on the inside face of the ferrous type flange, either one or both of the nonferrous type flanges are shorter than the length measured along the axis of the web; for the letters T and Z, on nonferrous type, the web is usually at right angles to the flanges. Letter H section may have a maximum of 5 percent slope on the inside face of the flanges. View more Structural Beam
November 2023
12
Marketplace 9540-01-199-4602
Request a Quotation from participating marketplace vendors
Related Documents 9540-01-199-4602 5+ Documents (More...)
QQ-A-200/15 BEAM,STRUCTURAL 6 FT NS Request Quotation AMS-QQ-A-200/15 BEAM,STRUCTURAL 41 FT NS Request
AMS-QQ-A-200/15 BEAM,STRUCTURAL 41 FT NS Request AMS-QQ-A-200/15 BEAM,STRUCTURAL 41 FT NS Request AMS-QQ-A
10164596 A structural shape fabricated from a ferrous or nonferrous material Request or AMS-QQ-A-200/15
Structural Beam 9540011994602 011994602 QQ-A-200/15 BEAM,STRUCTURAL 6 FT NS Request Quotation AMS-QQ-A
-2024T8511 K50A4T8511 AND10138-0403 AMS-QQ-A-200/3 QQ-A-200/3 A structural shape fabricated from
Structural Beam 9540011994602 011994602 Structural Beam 9540011689305011689305 Upgrade your Account
50358 AND10138-0403 AMS-QQ-A-200/3 K50A4O MS14389E009 QQ-A-200/3 9540PL1013478 A structural shape
086-1811 Structural Beam 9540010861811010861811 https//www.nsnlookup.com /fsg-95/fsc-9540/us 9540-01-199-4602
AMS-QQ-A-200/3 10138-0403 MS14389E005 QQ-A-200/3 9540PL0900342 A structural shape fabricated from
Structural Beam 9540010297087010297087 AMS-QQ-A https//www.nsnlookup.com /fsg-95/fsc-9540/us 9540-01-199-4602
Restrictions 9540-01-199-4602
9540-01-199-4602 is a Structural Beam that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 9540-01-199-4602
- US Air Force (FGGI)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- FGKZ
- US Navy (N9BZ)
- Effective Date:
- 1 Mar 2006
- Supplementary Collaborators:
- GTKE
Approved Sources 9540-01-199-4602
- Part Number
- Manufacturer
- Status
- AMS-QQ-A-200/15
- Manufacturer
- 0U583 - Sae International (Active)
- Incomplete Reference
- Incomplete Reference
- 1MA180D06-10007
- 76301 - The Boeing Company (Active)
- Incomplete Reference
- Incomplete Reference
- 10138-0403
- 29321 - Transtar Metals Corp (Active)
- Incomplete Reference
- Incomplete Reference
- AND10138-0403
- 99237 - Airforce-Navy Aeronautical Design (Active)
- Incomplete Standard
- Incomplete Standard
- AMS-QQ-A-200/15
- 81343 - Society Of Automotive Engineers Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- QQ-A-200/15
- 81348 - Federal Specifications Promulgated (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 9540-01-199-4602
- Characteristic
- Specifications
- FIIG
- Specifications
- A13100
- Basic Shape Style [AGTA]
- Z Shape
- Bottom Flange Width [BQJH]
- 0.750 Inches Nominal
- Fabrication Method [AARN]
- Extruded
- Fillet Radius Where Bottom Right Flange Joins Web Flange/Leg [BPXM]
- 0.094 Inches Nominal
- Fillet Radius Where Top Left Flange Joins Web Flange/Leg [BPXJ]
- 0.094 Inches Nominal
- First Tip Radius [AJJB]
- 0.050 Inches Nominal
- First Tip Style [CMZY]
- Lower Radius
- Heat Treatment [HEAT]
- T-76511 Solution Heat Treated
- Material [MATT]
- Aluminum Alloy Ams-Qq-A-200/15, Alloy 7075
- Nondefinitive Spec/Std Data [ZZZT]
- T76511 Temper
- Left Side Top Flange Thickness [ADXR]
- 0.050 Inches Nominal
- Left Top Inside Angle [CSMZ]
- 90.0 Degrees Nominal
- Length [ABRY]
- 10.000 Feet Minimum And 12.000 Feet Maximum
- Right Bottom Inside Angle [CWKK]
- 90.0 Degrees Nominal
- Right Side Bottom Flange Thickness [BMPQ]
- 0.050 Inches Nominal
- Second Tip Radius [CMZZ]
- 0.050 Inches Nominal
- Second Tip Relationship To First Tip [CNQJ]
- Not Identical
- Second Tip Style [CNQK]
- Upper Radius
- Overall Height [ABKW]
- 0.500 Inches Nominal
- Top Flange Width [BQJG]
- 0.750 Inches Nominal
- Web Flange Thickness [BPXN]
- 0.050 Inches Nominal
- Weight Per Unit Measure [BRFD]
- 0.118 Pounds Per Linear Foot
Weapon Systems (WSDC) 9540-01-199-4602
DLA Procurement Analysis 9540-01-199-4602
- Last Stock Position:
- 69 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 9540-01-199-4602
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 9540-01-199-4602
Freight Information 9540-01-199-4602
9540-01-199-4602 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 104420. A Sub NMFC of X. It has a NMFC Description of BEAMS NOI I/S. 9540-01-199-4602 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 53800 which rates the freight between FCL and LCL. 9540-01-199-4602 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 576 for ocean manifesting and military sealift. 9540-01-199-4602 is not classified as a special type of cargo when transported by water. 9540-01-199-4602 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 9540-01-199-4602
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- --
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- No Requirement
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
- No Requirement
Contracting Technical Data File (CTDF) 9540-01-199-4602 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- T
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: