Premium Information is available for this item - Upgrade for $1 a day
9540-01-176-1083
Structural Beam
9540011761083 011761083 1MA160D06-10047 AMS-QQ-A-200/11 10136-1403 AMS10136-1403 AND10136-1403 QQ-A-200/11
A structural shape fabricated from a ferrous or nonferrous material and resembles the following cross-sectional forms: For the letter H, both flanges of the H section are equal or longer than the width measured along the axis of the web; for the letter I, a 16 2/3 percent slope on the inside face of the ferrous type flange, either one or both of the nonferrous type flanges are shorter than the length measured along the axis of the web; for the letters T and Z, on nonferrous type, the web is usually at right angles to the flanges. Letter H section may have a maximum of 5 percent slope on the inside face of the flanges. View more Structural Beam
November 2023
11
Marketplace 9540-01-176-1083
Request a Quotation from participating marketplace vendors
Updated Every Day Updated Every Day 
Updated Every Day Related Documents 9540-01-176-1083 5+ Documents (More...)
AMS-QQ-A200/11 BEAM,STRUCTURAL 45 FT NS Request Quotation AMS-QQ-A-200/11 BEAM,STRUCTURAL 3 FT NS Request
BEAM,STRUCTURAL 3 FT NS Request 4 FT NS Request Quotation AMS-QQ-A-200/11 BEAM,STRUCTURAL 3 FT
https//www.nsnlookup.com /fsg-95/fsc-9540/us 9540-01-176-1083 Structural Beam 9540011761083 011761083
10136-1403 AMS10136-1403 AND10136-1403QQ-A-200/11 A structural shape fabricated from a ferrous BEAM,
1MA160D06-10047 AMS-QQ-A-200/11 10136-1403 AMS10136-1403 AND10136-1403 QQ-A-200/11 A structural shape
008043097 Upgrade your Account Upgrade 9540-00-804-3097Structural Beam9540008043097 008043097 AMS-QQ-A-200/11
BEAM,STRUCTURAL 4 FT NS Request Quotation AMS-QQ-A-200/11 BEAM,STRUCTURAL 3 FT NS Request Quotation
TMPR https PA4450 TMPR AMS-STD-184 TMPR AMS-QQ-A-200/11 TMPR HT194 QQ-A TMPR AMS-QQ-A BEAM,STRUCTURAL
AMS-QQ-A-200/3 AMS10136-1403 QQ-A-200/3 A structural shape fabricated from a ferrous or nonferrous
Structural Beam 9540011761083 011761083 AND10136-1403 QQ-A-200/11 A structural shape fabricated
Restrictions 9540-01-176-1083
9540-01-176-1083 is a Structural Beam that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 9540-01-176-1083
- US Navy (N9BZ)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- N9ZD
- Supplementary Collaborators:
- GTKE
- Canada (ZC01)
- Effective Date:
- 1 Apr 1991
Approved Sources 9540-01-176-1083
- Part Number
- Manufacturer
- Status
- 1MA160D06-10047
- Manufacturer
- 76301 - The Boeing Company (Active)
- Incomplete Reference
- Incomplete Reference
- AMS-QQ-A-200/11
- 0U583 - Sae International (Active)
- Incomplete Reference
- Incomplete Reference
- 10136-1403
- 29321 - Transtar Metals Corp (Active)
- Incomplete Reference
- Incomplete Reference
- AMS10136-1403
- 0U583 - Sae International (Active)
- Incomplete Reference
- Incomplete Reference
- AMS10136-1403
- 81343 - Society Of Automotive Engineers Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- AND10136-1403
- 99237 - Airforce-Navy Aeronautical Design (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- QQ-A-200/11
- 81348 - Federal Specifications Promulgated (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- AMS-QQ-A-200/11
- 81343 - Society Of Automotive Engineers Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 9540-01-176-1083
- Characteristic
- Specifications
- FIIG
- Specifications
- A13100
- Basic Shape Style [AGTA]
- T Shape
- Fabrication Method [AARN]
- Extruded
- Fillet Radius Where Top Left Flange Joins Web Flange/Leg [BPXJ]
- 0.125 Inches Nominal
- Fillet Radius Where Top Right Flange Joins Web Flange/Leg [BPXL]
- 0.125 Inches Nominal
- First Tip Radius [AJJB]
- 0.125 Inches Nominal
- First Tip Style [CMZY]
- Lower Radius
- Heat Treatment [HEAT]
- T-76511 Solution Heat Treated
- Material [MATT]
- Aluminum Alloy Ams-Qq-A-200/11, Alloy 7075
- Nondefinitive Spec/Std Data [ZZZT]
- T76511 Temper
- Left Side Top Flange Distance To Center Of Both Flanges [BPXD]
- 0.750 Inches Nominal
- Left Side Top Flange Thickness [ADXR]
- 0.078 Inches Nominal
- Left Top Inside Angle [CSMZ]
- 90.0 Degrees Nominal
- Leg Thickness [AJJP]
- 0.078 Inches Nominal
- Length [ABRY]
- 10.000 Feet Minimum And 12.000 Feet Maximum
- Right Top Inside Angle [CRZC]
- 90.0 Degrees Nominal
- Right Side Top Flange Distance To Center Of Both Flanges [BPXG]
- 0.750 Inches Nominal
- Right Side Top Flange Thickness [ADXS]
- 0.078 Inches Nominal
- Second Tip Relationship To First Tip [CNQJ]
- Identical
- Overall Height [ABKW]
- 1.000 Inches Nominal
- Top Flange Width [BQJG]
- 1.500 Inches Nominal
- Weight Per Unit Measure [BRFD]
- 0.230 Pounds Per Linear Foot
- Third Tip Radius [CNBB]
- 0.125 Inches Nominal
- Third Tip Relationship To Preceding Tips [CNQL]
- Not Identical
- Third Tip Style [CNQM]
- Full Radius
Weapon Systems (WSDC) 9540-01-176-1083
DLA Procurement Analysis 9540-01-176-1083
- Last Stock Position:
- 6 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 9540-01-176-1083
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 9540-01-176-1083
Freight Information 9540-01-176-1083
9540-01-176-1083 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 104420. A Sub NMFC of X. It has a NMFC Description of BEAMS NOI I/S. 9540-01-176-1083 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 53800 which rates the freight between FCL and LCL. 9540-01-176-1083 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 576 for ocean manifesting and military sealift. 9540-01-176-1083 is not classified as a special type of cargo when transported by water. 9540-01-176-1083 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 9540-01-176-1083
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- --
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- No Requirement
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
- No Requirement
Contracting Technical Data File (CTDF) 9540-01-176-1083 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- T
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: