Premium Information is available for this item - Upgrade for $1 a day
9540-01-167-0527
Structural Beam
9540011670527 011670527 AMS-QQ-A-200/11 LS4289 QQ-A-200/11
A structural shape fabricated from a ferrous or nonferrous material and resembles the following cross-sectional forms: For the letter H, both flanges of the H section are equal or longer than the width measured along the axis of the web; for the letter I, a 16 2/3 percent slope on the inside face of the ferrous type flange, either one or both of the nonferrous type flanges are shorter than the length measured along the axis of the web; for the letters T and Z, on nonferrous type, the web is usually at right angles to the flanges. Letter H section may have a maximum of 5 percent slope on the inside face of the flanges. View more Structural Beam
November 2023
9
Marketplace 9540-01-167-0527
Request a Quotation from participating marketplace vendors
Updated Every 15 Minutes 
Updated Every Day Updated Every Day 
Updated Every Day Related Documents 9540-01-167-0527 5+ Documents (More...)
- - 013792405 200 AMS-QQ-A-200/ / 11 - - AMS-QQ-A -200 /11 - /11 - - AMS-QQ-A -200 /11 - - AMS-QQ-A-200
/11 BEAM BEAM 200 AMS-QQ-A-200/ /11 - - AMS-QQ-A - -200 /11 BEAM 200 AMS-QQ-A-200/ / 11 - - AMS-QQ-A-
- - AMS-QQ-A -200/11 BEAM AMS-QQ-A-200/11 /11 AMS-QQ-A -200/11 - - AMS-QQ-A https/ BEAM - - AMS-QQ-A
BEAM - - AMS-QQ-A-200/11 - // AMS-QQ-A - -200/11 - - AMS-QQ-A /11 - - AMS-QQ-A -200/11 - -
- - AMS-QQ-A-200/11 - // AMS-QQ-A AMS-QQ-A-200 / /11 - - AMS-QQ-A A https AMS-QQ-A-200 /11 BEAM
200 AMS-QQ-A-200 / /11 - - AMS-QQ-A-200/11 - // AMS-QQ-A -200 /11 A https AMS-QQ-A-200 /11 BEAM 200 AMS-QQ-A
- - AMS-QQ-A-200/11 /11 AMS-QQ-A -200/ 11 - - AMS-QQ-A -200 /11 /fsg-95 /11 AMS-QQ-A -200/11 - - AMS-QQ-A
BEAM 200 AMS-QQ-A-200/ / 11 - - AMS-QQ-A-200 /11 /11 // // AMS-QQ-A AMS-QQ-A-200 11 - - AMS-QQ-A
// AMS-QQ-A -200 /11 / 9540013482848013482848AMS-QQ-A -200 / /11 - - AMS-QQ-A-200/11 /11 AMS-QQ-A
-200/ 11 - - AMS-QQ-A -200 /11 BEAM 200 AMS-QQ-A -200 / /11 11 A https - - AMS-QQ-A - - -200 /11 BEAM
Restrictions 9540-01-167-0527
9540-01-167-0527 is a Structural Beam that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 9540-01-167-0527
- US Air Force (FGGI)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- FGKZ
Approved Sources 9540-01-167-0527
- Part Number
- Manufacturer
- Status
- AMS-QQ-A-200/11
- Manufacturer
- 0U583 - Sae International (Active)
- Incomplete Reference
- Incomplete Reference
- LS4289
- 98897 - Lockheed Martin Corp (Active)
- Incomplete Reference
- Incomplete Reference
- QQ-A-200/11
- 81348 - Federal Specifications Promulgated (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- AMS-QQ-A-200/11
- 81343 - Society Of Automotive Engineers Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 9540-01-167-0527
- Characteristic
- Specifications
- FIIG
- Specifications
- A13100
- Basic Shape Style [AGTA]
- T Shape
- Fabrication Method [AARN]
- Extruded
- Fillet Radius Where Top Left Flange Joins Web Flange/Leg [BPXJ]
- 0.438 Inches Nominal
- Fillet Radius Where Top Right Flange Joins Web Flange/Leg [BPXL]
- 0.438 Inches Nominal
- First Tip Inner Radius [CNBD]
- 0.031 Inches Nominal
- First Tip Outer Radius [CNBJ]
- 0.031 Inches Nominal
- First Tip Style [CMZY]
- Square W/ Inner And Outer Corner Radii
- Heat Treatment [HEAT]
- T-6 Solution Heat Treated
- Material [MATT]
- Aluminum Alloy Ams-Qq-A-200/11, Alloy 7075
- Nondefinitive Spec/Std Data [ZZZT]
- T6 Temper
- Left Side Top Flange Distance To Center Of Both Flanges [BPXD]
- 1.935 Inches Nominal
- Left Side Top Flange Thickness [ADXR]
- 0.780 Inches Nominal
- Left Top Inside Angle [CSMZ]
- 90.0 Degrees Nominal
- Leg Thickness [AJJP]
- 0.530 Inches Nominal
- Length [ABRY]
- 10.000 Feet Minimum And 12.000 Feet Maximum
- Right Top Inside Angle [CRZC]
- 90.0 Degrees Nominal
- Right Side Top Flange Distance To Center Of Both Flanges [BPXG]
- 2.155 Inches Nominal
- Right Side Top Flange Thickness [ADXS]
- 0.780 Inches Nominal
- Second Tip Relationship To First Tip [CNQJ]
- Identical
- Overall Height [ABKW]
- 6.900 Inches Nominal
- Special Features [FEAT]
- Taper Leg To 0.375 In. Width,3.900 In. Length
- Top Flange Width [BQJG]
- 4.090 Inches Nominal
- Weight Per Unit Measure [BRFD]
- 0.716 Pounds Per Linear Foot
- Third Tip Relationship To Preceding Tips [CNQL]
- Identical W/First Tip
Weapon Systems (WSDC) 9540-01-167-0527
DLA Procurement Analysis 9540-01-167-0527
- Last Stock Position:
- 1 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 9540-01-167-0527
Similar Supply Items to 9540-01-167-0527
Freight Information 9540-01-167-0527
9540-01-167-0527 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 104420. A Sub NMFC of X. It has a NMFC Description of BEAMS NOI I/S. 9540-01-167-0527 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 53800 which rates the freight between FCL and LCL. 9540-01-167-0527 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 576 for ocean manifesting and military sealift. 9540-01-167-0527 is not classified as a special type of cargo when transported by water. 9540-01-167-0527 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 9540-01-167-0527
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- --
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- No Requirement
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
- No Requirement
Contracting Technical Data File (CTDF) 9540-01-167-0527 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: