Premium Information is available for this item - Upgrade for $1 a day
9540-01-164-1197
Structural Beam
9540011641197 011641197 K40D143T73511 AMS10136-3005 1MA160D05-10130 AMS-QQ-A-200/11 AND10136-3005 10164591
A structural shape fabricated from a ferrous or nonferrous material and resembles the following cross-sectional forms: For the letter H, both flanges of the H section are equal or longer than the width measured along the axis of the web; for the letter I, a 16 2/3 percent slope on the inside face of the ferrous type flange, either one or both of the nonferrous type flanges are shorter than the length measured along the axis of the web; for the letters T and Z, on nonferrous type, the web is usually at right angles to the flanges. Letter H section may have a maximum of 5 percent slope on the inside face of the flanges. View more Structural Beam
November 2023
15
Marketplace 9540-01-164-1197
Request a Quotation from participating marketplace vendors
Related Documents 9540-01-164-1197 5+ Documents (More...)
Features SAE AMS-QQ-A-200 QQ-A-200/11 T73511 0.750X144 AMS-QQ-A-200/11 T73511 0.750X144 QQ-A-
SAE AMS-QQ-A-200 QQ-A-200/11 T73511 0.750X144 AMS-QQ-A-200/11 T73511 0.750X144 QQ-A-200/11 A
BEAM,STRUCTURAL Quotation QQA200-11 BEAM,STRUCTURAL 603 EA NS Request Quotation AMS-QQ-A-200/11
BEAM,STRUCTURAL Quotation QQA200-11 BEAM,STRUCTURAL 603 EA NS Request Quotation AMS-QQ-A-200/11
SAE AMS-QQ-A-200 QQ-A-200/11 T73511 0.750X144 AMS-QQ-A-200/11 T73511 0.750X144 QQ-A-200/11 A
https//www.nsnlookup.com /fsg-95/fsc-9540/us 9540-01-164-1197 Structural Beam 9540011641197 011641197
, Cin: 29321, Length 5.50, Al Aly 7075-T73 Sae Ams - Bus Cplr, Make From Tiernay P/N And10136-3005, Cin
: 29321, Length 5.50, Al Aly 7075-T73 STRUCTURAL 3 EA - Bus Cplr, Make From Tiernay P/N And10136-3005
00-005-6378 Structural Angle 9540000056378 000056378 Request - Bus Cplr, Make From Tiernay P/N And10136-3005
Cin: 29321, Length 5.50, Al Aly 7075-T73 Sae Ams Qq-A-200 EA - Bus Cplr, Make From Tiernay P/N And10136-3005
Restrictions 9540-01-164-1197
9540-01-164-1197 is a Structural Beam that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 9540-01-164-1197
- US Air Force (FGGI)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- FGKZ
- US Navy (N9BZ)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- N9ZD
- Supplementary Collaborators:
- GTKE
- Finland (WF01)
- Effective Date:
- 1 Jul 2009
- Spain (YB01)
- Effective Date:
- 1 Apr 1991
Approved Sources 9540-01-164-1197
- Part Number
- Manufacturer
- Status
- K40D143T73511
- Manufacturer
- 81755 - Lockheed Martin Corporation (Active)
- Incomplete Reference
- Incomplete Reference
- AMS10136-3005
- 0U583 - Sae International (Active)
- Incomplete Reference
- Incomplete Reference
- 1MA160D05-10130
- 76301 - The Boeing Company (Active)
- Incomplete Reference
- Incomplete Reference
- AMS-QQ-A-200/11
- 0U583 - Sae International (Active)
- Incomplete Reference
- Incomplete Reference
- AMS-QQ-A-200/11
- 81343 - Society Of Automotive Engineers Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- AMS10136-3005
- 81343 - Society Of Automotive Engineers Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- AND10136-3005
- 99237 - Airforce-Navy Aeronautical Design (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 10164591
- A486G - Nimikkeistokeskus Ncb Finland (Active)
- NATO Reference
- NATO Reference
Datasheet 9540-01-164-1197
- Characteristic
- Specifications
- FIIG
- Specifications
- A13100
- Basic Shape Style [AGTA]
- T Shape
- Fabrication Method [AARN]
- Extruded
- Fillet Radius Where Top Left Flange Joins Web Flange/Leg [BPXJ]
- 0.125 Inches Nominal
- Fillet Radius Where Top Right Flange Joins Web Flange/Leg [BPXL]
- 0.125 Inches Nominal
- First Tip Radius [AJJB]
- 0.125 Inches Nominal
- First Tip Style [CMZY]
- Lower Radius
- Heat Treatment [HEAT]
- T-73511 Solution Heat Treated
- Material [MATT]
- Aluminum Allloy Ams-Qq-A-200/11, Alloy 7075
- Nondefinitive Spec/Std Data [ZZZT]
- 7075 Alloy And T73511 Temper
- Left Side Top Flange Distance To Center Of Both Flanges [BPXD]
- 1.500 Inches Nominal
- Left Side Top Flange Thickness [ADXR]
- 0.125 Inches Nominal
- Left Top Inside Angle [CSMZ]
- 90.0 Degrees Nominal
- Leg Thickness [AJJP]
- 0.125 Inches Nominal
- Length [ABRY]
- 10.000 Feet Minimum And 12.000 Feet Maximum
- Right Top Inside Angle [CRZC]
- 90.0 Degrees Nominal
- Right Side Top Flange Distance To Center Of Both Flanges [BPXG]
- 1.500 Inches Nominal
- Right Side Top Flange Thickness [ADXS]
- 0.125 Inches Nominal
- Second Tip Relationship To First Tip [CNQJ]
- Identical
- Overall Height [ABKW]
- 2.500 Inches Nominal
- Top Flange Width [BQJG]
- 3.000 Inches Nominal
- Weight Per Unit Measure [BRFD]
- 0.812 Pounds Per Linear Foot
- Third Tip Radius [CNBB]
- 0.062 Inches Nominal
- Third Tip Relationship To Preceding Tips [CNQL]
- Not Identical
- Third Tip Style [CNQM]
- Full Radius
Weapon Systems (WSDC) 9540-01-164-1197
DLA Procurement Analysis 9540-01-164-1197
- Last Stock Position:
- 20 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 9540-01-164-1197
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of āLā or āFā, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 9540-01-164-1197
Freight Information 9540-01-164-1197
9540-01-164-1197 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 104420. A Sub NMFC of X. It has a NMFC Description of BEAMS NOI I/S. 9540-01-164-1197 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 53800 which rates the freight between FCL and LCL. 9540-01-164-1197 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 576 for ocean manifesting and military sealift. 9540-01-164-1197 is not classified as a special type of cargo when transported by water. 9540-01-164-1197 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 9540-01-164-1197
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- --
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- No Requirement
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
- No Requirement
Contracting Technical Data File (CTDF) 9540-01-164-1197 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: