Premium Information is available for this item - Upgrade for $1 a day
9540-01-076-3313
Structural Beam
9540010763313 010763313 AND10138-1601
A structural shape fabricated from a ferrous or nonferrous material and resembles the following cross-sectional forms: For the letter H, both flanges of the H section are equal or longer than the width measured along the axis of the web; for the letter I, a 16 2/3 percent slope on the inside face of the ferrous type flange, either one or both of the nonferrous type flanges are shorter than the length measured along the axis of the web; for the letters T and Z, on nonferrous type, the web is usually at right angles to the flanges. Letter H section may have a maximum of 5 percent slope on the inside face of the flanges. View more Structural Beam
January 2023
10
Marketplace 9540-01-076-3313
Request a Quotation from participating marketplace vendors
Related Documents 9540-01-076-3313 1+ Documents (More...)
3 NSN 9540-01-076-3313 (Identification 3 NSN 9540-01-076-3313 (Identification 3 NSN 9540-01-076-3313
(Identification 3 NSN 9540-01-076-3313 (Identification 3 NSN 9540-01-076-3313 (Identification 3 NSN 9540
Restrictions 9540-01-076-3313
9540-01-076-3313 is a Structural Beam that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
End Users 9540-01-076-3313
- Germany (ZG01)
- Effective Date:
- 1 Apr 1991
Approved Sources 9540-01-076-3313
- Part Number
- Manufacturer
- Status
- AND10138-1601
- Manufacturer
- 99237 - Airforce-Navy Aeronautical Design (Active)
- Incomplete Standard
- Incomplete Standard
Datasheet 9540-01-076-3313
- Characteristic
- Specifications
- FIIG
- Specifications
- A13100
- Basic Shape Style [AGTA]
- Z Shape
- Bottom Flange Width [BQJH]
- 0.750 Inches Nominal
- Fabrication Method [AARN]
- Extruded
- Fillet Radius Where Bottom Right Flange Joins Web Flange/Leg [BPXM]
- 0.125 Inches Nominal
- Fillet Radius Where Top Left Flange Joins Web Flange/Leg [BPXJ]
- 0.125 Inches Nominal
- First Tip Radius [AJJB]
- 0.078 Inches Nominal
- First Tip Style [CMZY]
- Lower Radius
- Heat Treatment [HEAT]
- T-3511 Solution Heat Treated
- Material Document And Classification [MDCL]
- Qq-A-200/3 Fed Spec 1St Material Response
- Material [MATT]
- Aluminum Alloy 2024
- Nondefinitive Spec/Std Data [ZZZT]
- 2024 Alloy And T3511 Temper
- Left Side Top Flange Thickness [ADXR]
- 0.078 Inches Nominal
- Left Top Inside Angle [CSMZ]
- 90.0 Degrees Nominal
- Length [ABRY]
- 10.000 Feet Minimum And 12.000 Feet Maximum
- Right Bottom Inside Angle [CWKK]
- 90.0 Degrees Nominal
- Right Side Bottom Flange Thickness [BMPQ]
- 0.078 Inches Nominal
- Second Tip Radius [CMZZ]
- 0.078 Inches Nominal
- Second Tip Relationship To First Tip [CNQJ]
- Not Identical
- Second Tip Style [CNQK]
- Upper Radius
- Overall Height [ABKW]
- 1.750 Inches Nominal
- Top Flange Width [BQJG]
- 0.500 Inches Nominal
- Web Flange Thickness [BPXN]
- 0.078 Inches Nominal
- Weight Per Unit Measure [BRFD]
- 0.294 Pounds Per Linear Foot
Similar Supply Items to 9540-01-076-3313
Freight Information 9540-01-076-3313
9540-01-076-3313 has freight characteristics managed by Germany.. 9540-01-076-3313 has a variance between NMFC and UFC when transported by rail and the description should be consulted.