Premium Information is available for this item - Upgrade for $1 a day
9540-01-076-3312
Structural Beam
9540010763312 010763312 AND10136-3004
A structural shape fabricated from a ferrous or nonferrous material and resembles the following cross-sectional forms: For the letter H, both flanges of the H section are equal or longer than the width measured along the axis of the web; for the letter I, a 16 2/3 percent slope on the inside face of the ferrous type flange, either one or both of the nonferrous type flanges are shorter than the length measured along the axis of the web; for the letters T and Z, on nonferrous type, the web is usually at right angles to the flanges. Letter H section may have a maximum of 5 percent slope on the inside face of the flanges. View more Structural Beam
January 2023
6
Marketplace 9540-01-076-3312
Request a Quotation from participating marketplace vendors
Related Documents 9540-01-076-3312 2+ Documents (More...)
9540-01-076-3312 2+ Documents ( More... ) https//www.nsnlookup.com /fsg-95/fsc-9540/us 9540-01-076-3312
/fsg-95/fsc-9540/us 9540-01-076-3312 /fsg-95/fsc-9540/us 9540-01-076-3312 /fsg-95/fsc-9540/us 9540-01
-200/11 - - - - AMS-QQ-A -200/11 BEAM AMS-QQ-A https//www.nsnlookup.com /fsg-95/fsc-9540/us 9540-01-076-3312
Structural Beam 9540010763312 010763312 for $1 a day Upgrade your Account Upgrade 9540-01-076-3312Structural
Restrictions 9540-01-076-3312
9540-01-076-3312 is a Structural Beam that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
End Users 9540-01-076-3312
- Germany (ZG01)
- Effective Date:
- 1 Apr 1991
Approved Sources 9540-01-076-3312
- Part Number
- Manufacturer
- Status
- AND10136-3004
- Manufacturer
- 99237 - Airforce-Navy Aeronautical Design (Active)
- Incomplete Standard
- Incomplete Standard
Datasheet 9540-01-076-3312
- Characteristic
- Specifications
- FIIG
- Specifications
- A13100
- Basic Shape Style [AGTA]
- T Shape
- Fabrication Method [AARN]
- Extruded
- Fillet Radius Where Top Left Flange Joins Web Flange/Leg [BPXJ]
- 0.188 Inches Nominal
- Fillet Radius Where Top Right Flange Joins Web Flange/Leg [BPXL]
- 0.188 Inches Nominal
- First Tip Radius [AJJB]
- 0.188 Inches Nominal
- First Tip Style [CMZY]
- Lower Radius
- Heat Treatment [HEAT]
- T-6511 Solution Heat Treated
- Material Document And Classification [MDCL]
- Qq-A-200/11 Fed Spec 1St Material Response
- Material [MATT]
- Aluminum Alloy 7075
- Nondefinitive Spec/Std Data [ZZZT]
- 7075 Alloy And T6511 Temper
- Left Side Top Flange Distance To Center Of Both Flanges [BPXD]
- 1.500 Inches Nominal
- Left Side Top Flange Thickness [ADXR]
- 0.188 Inches Nominal
- Left Top Inside Angle [CSMZ]
- 90.0 Degrees Nominal
- Leg Thickness [AJJP]
- 0.188 Inches Nominal
- Length [ABRY]
- 10.000 Feet Minimum And 12.000 Feet Maximum
- Right Top Inside Angle [CRZC]
- 90.0 Degrees Nominal
- Right Side Top Flange Distance To Center Of Both Flanges [BPXG]
- 1.500 Inches Nominal
- Right Side Top Flange Thickness [ADXS]
- 0.188 Inches Nominal
- Second Tip Relationship To First Tip [CNQJ]
- Identical
- Overall Height [ABKW]
- 2.000 Inches Nominal
- Top Flange Width [BQJG]
- 3.000 Inches Nominal
- Weight Per Unit Measure [BRFD]
- 1.080 Pounds Per Linear Foot
- Third Tip Radius [CNBB]
- 0.047 Inches Nominal
- Third Tip Relationship To Preceding Tips [CNQL]
- Not Identical
- Third Tip Style [CNQM]
- Full Radius
Similar Supply Items to 9540-01-076-3312
Freight Information 9540-01-076-3312
9540-01-076-3312 has freight characteristics managed by Germany.. 9540-01-076-3312 has a variance between NMFC and UFC when transported by rail and the description should be consulted.