Premium Information is available for this item - Upgrade for $1 a day
9540-01-071-3526
Structural Beam
9540010713526 010713526 AND10136-2404 K40A107T3511 10136-2404 MS14376E051 AMS-QQ-A-200/3 9540PL0905359
A structural shape fabricated from a ferrous or nonferrous material and resembles the following cross-sectional forms: For the letter H, both flanges of the H section are equal or longer than the width measured along the axis of the web; for the letter I, a 16 2/3 percent slope on the inside face of the ferrous type flange, either one or both of the nonferrous type flanges are shorter than the length measured along the axis of the web; for the letters T and Z, on nonferrous type, the web is usually at right angles to the flanges. Letter H section may have a maximum of 5 percent slope on the inside face of the flanges. View more Structural Beam
November 2023
19
Marketplace 9540-01-071-3526
Request a Quotation from participating marketplace vendors
Related Documents 9540-01-071-3526 5+ Documents (More...)
(Identification) 1/3 NSN 9540-01-071-3526 (Identification) 2/3 NSN 9540-01-071-3526 (Identification
AMS-QQ-A-200/3 BEAM,STRUCTURAL 3 FT NS Request Quotation AND10136-2404 BEAM,STRUCTURAL 53 FT NS Request
https - AMS-QQ-A-200 AMS-QQ-A-200/3 BEAM,STRUCTURAL 3 FT NS Request Quotation AND10136-2404 BEAM
BEAM,STRUCTURAL 53 FT NS Request AMS-QQ-A A structural shape AMS-QQ-A-200/3 https - AMS-QQ-A-200
Structural Beam 9540010713526 010713526 AMS-QQ-A-200/3 BEAM,STRUCTURAL 3 FT NS Request Quotation
AND10136-2404 BEAM,STRUCTURAL 53 FT NS Request AMS-QQ-A-200/3 BEAM,STRUCTURAL 3 FT NS Request Quotation
/QQ-A-200/11-T6511 AND10136 /QQ-A-200/11-T6511 AND10136-2404 QQA200 https//www.nsnlookup.com /fsg
/QQ-A-200/11-T6511 AND10136-2404 QQA200-11 AMS10136-2404 A structural shape fabricated Quotation
/QQ-A-200/11-T6511 AND10136-2404 QQA200-11 AMS10136-2404 A structural shape fabricated from a ferrous
AND10136-2404 BEAM,STRUCTURAL 53 FT NS Request Quotation QQ-A200/11 BEAM,STRUCTURAL 16 FT NS Request
Restrictions 9540-01-071-3526
9540-01-071-3526 is a Structural Beam that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 9540-01-071-3526
- US Air Force (FGGI)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- FGKZ
- US Navy (N9BZ)
- Effective Date:
- 1 May 2009
- Supplementary Collaborators:
- GTHD
- Poland (WP01)
- Effective Date:
- 1 Jan 2007
- Italy (ZR01)
- Effective Date:
- 1 Dec 2007
- Greece (ZU01)
- Effective Date:
- 1 Jan 2007
Approved Sources 9540-01-071-3526
- Part Number
- Manufacturer
- Status
- MS14376E051
- Manufacturer
- 96906 - Military Standards (Active)
- Definitive Standard
- Definitive Standard
- AND10136-2404
- 99237 - Airforce-Navy Aeronautical Design (Active)
- Incomplete Standard
- Incomplete Standard
- K40A107T3511
- 81755 - Lockheed Martin Corporation (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- 10136-2404
- 29321 - Transtar Metals Corp (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- AMS-QQ-A-200/3
- 0U583 - Sae International (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- AMS-QQ-A-200/3
- 81343 - Society Of Automotive Engineers Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- 9540PL0905359
- 9009H - Jednolity Indeks Materialowy - (Active)
- NATO Reference
- NATO Reference
Datasheet 9540-01-071-3526
- Characteristic
- Specifications
- FIIG
- Specifications
- A13100
- Basic Shape Style [AGTA]
- T Shape
- Fabrication Method [AARN]
- Extruded
- Fillet Radius Where Top Left Flange Joins Web Flange/Leg [BPXJ]
- 0.125 Inches Nominal
- Fillet Radius Where Top Right Flange Joins Web Flange/Leg [BPXL]
- 0.125 Inches Nominal
- First Tip Radius [AJJB]
- 0.094 Inches Nominal
- First Tip Style [CMZY]
- Lower Radius
- Heat Treatment [HEAT]
- T-3511 Solution Heat Treated
- Material [MATT]
- Aluminum Alloy Ams-Qq-A-200/3, Alloy 2024
- Nondefinitive Spec/Std Data [ZZZT]
- T3511 Temper
- Left Side Top Flange Distance To Center Of Both Flanges [BPXD]
- 1.250 Inches Nominal
- Left Side Top Flange Thickness [ADXR]
- 0.094 Inches Nominal
- Left Top Inside Angle [CSMZ]
- 90.0 Degrees Nominal
- Leg Thickness [AJJP]
- 0.094 Inches Nominal
- Length [ABRY]
- 10.000 Feet Minimum And 12.000 Feet Maximum
- Right Top Inside Angle [CRZC]
- 90.0 Degrees Nominal
- Right Side Top Flange Distance To Center Of Both Flanges [BPXG]
- 1.250 Inches Nominal
- Right Side Top Flange Thickness [ADXS]
- 0.094 Inches Nominal
- Second Tip Relationship To First Tip [CNQJ]
- Identical
- Overall Height [ABKW]
- 1.625 Inches Nominal
- Top Flange Width [BQJG]
- 2.500 Inches Nominal
- Weight Per Unit Measure [BRFD]
- 0.457 Pounds Per Linear Foot
- Third Tip Radius [CNBB]
- 0.047 Inches Nominal
- Third Tip Relationship To Preceding Tips [CNQL]
- Not Identical
- Third Tip Style [CNQM]
- Full Radius
Weapon Systems (WSDC) 9540-01-071-3526
DLA Procurement Analysis 9540-01-071-3526
- Last Stock Position:
- 279 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 9540-01-071-3526
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 9540-01-071-3526
Freight Information 9540-01-071-3526
9540-01-071-3526 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 104420. A Sub NMFC of X. It has a NMFC Description of BEAMS NOI I/S. 9540-01-071-3526 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 53800 which rates the freight between FCL and LCL. 9540-01-071-3526 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 576 for ocean manifesting and military sealift. 9540-01-071-3526 is not classified as a special type of cargo when transported by water. 9540-01-071-3526 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 9540-01-071-3526
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- --
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- No Requirement
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
- No Requirement
Contracting Technical Data File (CTDF) 9540-01-071-3526 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- L
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: