Premium Information is available for this item - Upgrade for $1 a day
9540-01-071-2148
Structural Beam
9540010712148 010712148 19786 K40A33T3511 QQ-A-200/3 MS14375E061
A structural shape fabricated from a ferrous or nonferrous material and resembles the following cross-sectional forms: For the letter H, both flanges of the H section are equal or longer than the width measured along the axis of the web; for the letter I, a 16 2/3 percent slope on the inside face of the ferrous type flange, either one or both of the nonferrous type flanges are shorter than the length measured along the axis of the web; for the letters T and Z, on nonferrous type, the web is usually at right angles to the flanges. Letter H section may have a maximum of 5 percent slope on the inside face of the flanges. View more Structural Beam
January 2023
13
Marketplace 9540-01-071-2148
Request a Quotation from participating marketplace vendors
Related Documents 9540-01-071-2148 5+ Documents (More...)
/fsg-95/fsc-9540/us 9540-01-071-2148 Structural Beam 9540010712148 010712148,19786 19786K40A33T3511QQ-A
RQST NE Updated Every Day 9540-01-071-2148 RQST Updated Every Day /fsg-95/fsc-9540/us 9540-01-071
9540-01-071-2148Structural Beam9540010712148 010712148 19786 19786 Structural Beam 9540010712148 010712148,19786
K40A33T8511 MS14375E059 19786 1978619786 Structural Beam 9540010712148 010712148,19786 Upgrade for
19786 Structural Beam 9540010712148 010712148,19786 Upgrade for $1 a day Upgrade your Account Upgrade
BEAM,STRUCTURAL 1 FT NS Request Quotation AMS-QQ-A-200/3 BEAM,STRUCTURAL 3 FT NS Request Quotation 19786
https//www.nsnlookup.com /fsg-62/fsc-6240/us 6240-01-455-5638 Lamp Assembly 6240014555638014555638 19786
Upgrade for $1 a day Upgrade your Account Upgrade 6240-01 -455-5638Lamp Assembly6240014555638 014555638 19786
Structural Beam 9540010712148 010712148,19786 2148 Structural Beam 9540010712148 010712148,19786
Restrictions 9540-01-071-2148
9540-01-071-2148 is a Structural Beam that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
End Users 9540-01-071-2148
- Brazil (YA01)
- Effective Date:
- 1 Jan 2011
- Greece (ZU01)
- Effective Date:
- 1 Jan 2007
Approved Sources 9540-01-071-2148
- Part Number
- Manufacturer
- Status
- MS14375E061
- Manufacturer
- 96906 - Military Standards (Active)
- Definitive Standard
- Definitive Standard
- 19786
- 27610 - International Light Metals Corp Sub (Obsolete)
- Incomplete Reference
- Incomplete Reference
- K40A33T3511
- 81755 - Lockheed Martin Corporation (Active)
- Incomplete Reference
- Incomplete Reference
- QQ-A-200/3
- 81348 - Federal Specifications Promulgated (Active)
- Incomplete Standard
- Incomplete Standard
Datasheet 9540-01-071-2148
- Characteristic
- Specifications
- FIIG
- Specifications
- A13100
- Basic Shape Style [AGTA]
- T Shape
- Fabrication Method [AARN]
- Extruded
- Fillet Radius Where Top Left Flange Joins Web Flange/Leg [BPXJ]
- 0.060 Inches Nominal
- Fillet Radius Where Top Right Flange Joins Web Flange/Leg [BPXL]
- 0.060 Inches Nominal
- First Tip Style [CMZY]
- Square End
- Heat Treatment [HEAT]
- T-3511 Solution Heat Treated
- Material Document And Classification [MDCL]
- Qq-A-200/3 Fed Spec 1St Material Response
- Material [MATT]
- Aluminum Alloy 2024
- Nondefinitive Spec/Std Data [ZZZT]
- T3511 Temper
- Left Side Top Flange Distance To Center Of Both Flanges [BPXD]
- 1.250 Inches Nominal
- Left Side Top Flange Thickness [ADXR]
- 0.064 Inches Nominal
- Left Top Inside Angle [CSMZ]
- 90.0 Degrees Nominal
- Leg Thickness [AJJP]
- 0.064 Inches Nominal
- Length [ABRY]
- 10.000 Feet Minimum And 12.000 Feet Maximum
- Right Top Inside Angle [CRZC]
- 90.0 Degrees Nominal
- Right Side Top Flange Distance To Center Of Both Flanges [BPXG]
- 1.250 Inches Nominal
- Right Side Top Flange Thickness [ADXS]
- 0.064 Inches Nominal
- Second Tip Relationship To First Tip [CNQJ]
- Identical
- Overall Height [ABKW]
- 1.500 Inches Nominal
- Top Flange Width [BQJG]
- 2.500 Inches Nominal
- Weight Per Unit Measure [BRFD]
- 0.304 Pounds Per Linear Foot
- Specification/Standard Data [ZZZK]
- 81755-K40 Manufacturers Standard
- Third Tip Relationship To Preceding Tips [CNQL]
- Identical W/First Tip
NATO Stock Numbers Related to 9540-01-071-2148
Freight Information 9540-01-071-2148
9540-01-071-2148 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 013760. A Sub NMFC of X. It has a NMFC Description of ALUM TEES. 9540-01-071-2148 is rated as class 60 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 05830 which rates the freight between FCL and LCL. 9540-01-071-2148 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 576 for ocean manifesting and military sealift. 9540-01-071-2148 is not classified as a special type of cargo when transported by water. 9540-01-071-2148 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 9540-01-071-2148
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- --
- --
- --
- --
- --
- No Requirements
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- No Requirement
- --
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
- No Requirement