Premium Information is available for this item - Upgrade for $1 a day
9540-01-032-4191
Structural Beam
9540010324191 010324191 LS1074-2
A structural shape fabricated from a ferrous or nonferrous material and resembles the following cross-sectional forms: For the letter H, both flanges of the H section are equal or longer than the width measured along the axis of the web; for the letter I, a 16 2/3 percent slope on the inside face of the ferrous type flange, either one or both of the nonferrous type flanges are shorter than the length measured along the axis of the web; for the letters T and Z, on nonferrous type, the web is usually at right angles to the flanges. Letter H section may have a maximum of 5 percent slope on the inside face of the flanges. View more Structural Beam
January 2023
14
Marketplace 9540-01-032-4191
Request a Quotation from participating marketplace vendors
Related Documents 9540-01-032-4191 1+ Documents (More...)
LS1074-2 BEAM,STRUCTURAL 7 EA NS Request Quotation Subscribe to View Vendor Details...
Every Day 9540-01-032-4191 RQST Updated Every Day 9540-01-032-4191 RQST NE Related Documents 9540-01-
Restrictions 9540-01-032-4191
9540-01-032-4191 is a Structural Beam that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
End Users 9540-01-032-4191
- Brazil (YA01)
- Effective Date:
- 1 Feb 2015
- New Zealand (ZE)
- New Zealand (ZE01)
- Effective Date:
- 1 Apr 1991
- United Kingdom (ZK)
- United Kingdom (ZK01)
- Effective Date:
- 1 Apr 1991
Approved Sources 9540-01-032-4191
- Part Number
- Manufacturer
- Status
- LS1074-2
- Manufacturer
- 98897 - Lockheed Martin Corp (Active)
- Primary Buy
- Primary Buy
Datasheet 9540-01-032-4191
- Characteristic
- Specifications
- FIIG
- Specifications
- A13100
- Basic Shape Style [AGTA]
- T Shape
- Fabrication Method [AARN]
- Extruded
- Fillet Radius Where Top Left Flange Joins Web Flange/Leg [BPXJ]
- 0.109 Inches Minimum And 0.141 Inches Maximum
- Fillet Radius Where Top Right Flange Joins Web Flange/Leg [BPXL]
- 0.109 Inches Minimum And 0.141 Inches Maximum
- First Tip Inner Radius [CNBD]
- 0.016 Inches Minimum And 0.048 Inches Maximum
- First Tip Outer Radius [CNBJ]
- 0.016 Inches Minimum And 0.048 Inches Maximum
- First Tip Style [CMZY]
- Square W/ Inner And Outer Corner Radii
- Heat Treatment [HEAT]
- Stress Relieved
- Material Document And Classification [MDCL]
- Qq-A-200/3 Fed Spec 1St Material Response
- Material [MATT]
- Aluminum Alloy 2024
- Supplementary Features [SUPP]
- Procured In A Qq-A-200/3 Basic Temper /T3/ And Subsequently Solution Heat Treated By User To Precipitation Heat Treat Stress-Relieved T6 Temper Designation Mil-H-6088 Table Vit
- Usage Design [ALBY]
- Structural
- Left Side Top Flange Distance To Center Of Both Flanges [BPXD]
- 0.805 Inches Minimum And 0.820 Inches Maximum
- Left Side Top Flange Thickness [ADXR]
- 0.149 Inches Minimum And 0.163 Inches Maximum
- Left Top Inside Angle [CSMZ]
- 90.0 Degrees Nominal
- Leg Thickness [AJJP]
- 0.149 Inches Minimum And 0.163 Inches Maximum
- Length [ABRY]
- 12.000 Feet Nominal
- Right Side Top Flange Distance To Center Of Both Flanges [BPXG]
- 0.805 Inches Minimum And 0.820 Inches Maximum
- Right Side Top Flange Thickness [ADXS]
- 0.149 Inches Minimum And 0.163 Inches Maximum
- Right Top Inside Angle [CRZC]
- 90.0 Degrees Nominal
- Second Tip Relationship To First Tip [CNQJ]
- Identical
- Overall Height [ABKW]
- 1.609 Inches Minimum And 1.641 Inches Maximum
- Top Flange Width [BQJG]
- 1.609 Inches Minimum And 1.641 Inches Maximum
- Weight Per Unit Measure [BRFD]
- 0.488 Pounds Per Linear Foot
- Specification/Standard Data [ZZZK]
- 98897-Ls1074 Manufacturers Standard
- Third Tip Relationship To Preceding Tips [CNQL]
- Identical W/First Tip
Similar Supply Items to 9540-01-032-4191
Freight Information 9540-01-032-4191
9540-01-032-4191 has freight characteristics managed by Australia.. 9540-01-032-4191 has a variance between NMFC and UFC when transported by rail and the description should be consulted.