Premium Information is available for this item - Upgrade for $1 a day
9540-01-015-5004
Structural Beam
9540010155004 010155004 NAS344-43 QQ-A-200/13 1MA160E03-10065
A structural shape fabricated from a ferrous or nonferrous material and resembles the following cross-sectional forms: For the letter H, both flanges of the H section are equal or longer than the width measured along the axis of the web; for the letter I, a 16 2/3 percent slope on the inside face of the ferrous type flange, either one or both of the nonferrous type flanges are shorter than the length measured along the axis of the web; for the letters T and Z, on nonferrous type, the web is usually at right angles to the flanges. Letter H section may have a maximum of 5 percent slope on the inside face of the flanges. View more Structural Beam
January 2023
9
Marketplace 9540-01-015-5004
Request a Quotation from participating marketplace vendors
Related Documents 9540-01-015-5004 5+ Documents (More...)
QQ-A-200/13 BEAM,STRUCTURAL 2 EA NS Request Quotation Updated Every Day 9540-01-015-5004 RQST NE Updated
Every Day 9540-01-015-5004 RQST Updated Every Day 9540-01-015-5004 RQST NE Related Documents 9540-01
Beam 9540010155004 010155004 Structural Beam 9540009274415 009274415,26328 AMS-QQ-A-200/13 BEAM,STRUCTURAL
Beam 9540010155004 010155004 Structural Beam 9540009274415 009274415,26328 AMS-QQ-A-200/13 BEAM,STRUCTURAL
Structural Beam 9540010155004 010155004 009274415,26328 AMS-QQ-A-200/13 BEAM,STRUCTURAL https//
AMS-QQ-A-200/13 BEAM,STRUCTURAL 42 EA NS Request Quotation QQ-A-200/13 BEAM,STRUCTURAL 2 EA NS Request
// AMS-QQ-A-200/ 13 https // AMS-QQ-A -200/ 13 https // AMS-QQ-A https//www.nsnlookup.com /fsg-95/fsc
https BEAM https https // AMS-QQ-A-200/13 BEAM // AMS-QQ-A https//www.nsnlookup.com AMS-QQ-A -200
AMS-QQ-A // AMS-QQ-A-200/ 13 https 011911161 https // AMS-QQ-A-200/13 https https//www.nsnlookup.com
Restrictions 9540-01-015-5004
9540-01-015-5004 is a Structural Beam that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
End Users 9540-01-015-5004
- Germany (ZG01)
- Effective Date:
- 1 Apr 1991
Approved Sources 9540-01-015-5004
- Part Number
- Manufacturer
- Status
- NAS344-43
- Manufacturer
- 80205 - National Aerospace Standards (Active)
- Incomplete Reference
- Incomplete Reference
- 1MA160E03-10065
- 76301 - The Boeing Company (Active)
- Primary Buy
- Primary Buy
- QQ-A-200/13
- 81349 - Military Specifications (Active)
- Incomplete Standard
- Incomplete Standard
Datasheet 9540-01-015-5004
- Characteristic
- Specifications
- FIIG
- Specifications
- A13100
- Basic Shape Style [AGTA]
- T Shape
- Fabrication Method [AARN]
- Extruded
- Fillet Radius Where Top Left Flange Joins Web Flange/Leg [BPXJ]
- 0.125 Inches Nominal
- Fillet Radius Where Top Right Flange Joins Web Flange/Leg [BPXL]
- 0.125 Inches Nominal
- First Tip Radius [AJJB]
- 0.078 Inches Nominal
- First Tip Style [CMZY]
- Lower Radius
- Heat Treatment [HEAT]
- T-6511 Solution Heat Treated And Stress Relieved By Stretching
- Material [MATT]
- Aluminum Alloy,Qq-A-200/13,Alloy 7178
- Nondefinitive Spec/Std Data [ZZZT]
- T6511 Temper
- Left Side Top Flange Distance To Center Of Both Flanges [BPXD]
- 0.875 Inches Nominal
- Left Side Top Flange Thickness [ADXR]
- 0.078 Inches Nominal
- Left Top Inside Angle [CSMZ]
- 90.0 Degrees Nominal
- Leg Thickness [AJJP]
- 0.078 Inches Nominal
- Length [ABRY]
- 10.000 Feet Minimum And 12.000 Feet Maximum
- Right Side Top Flange Distance To Center Of Both Flanges [BPXG]
- 0.875 Inches Nominal
- Right Side Top Flange Thickness [ADXS]
- 0.078 Inches Nominal
- Right Top Inside Angle [CRZC]
- 90.0 Degrees Nominal
- Second Tip Relationship To First Tip [CNQJ]
- Identical
- Overall Height [ABKW]
- 1.125 Inches Nominal
- Top Flange Width [BQJG]
- 1.750 Inches Nominal
- Weight Per Unit Measure [BRFD]
- 0.266 Pounds Per Linear Foot
- Specification/Standard Data [ZZZK]
- 80205-Nas344 Professional/Industrial Association Standard
- Third Tip Radius [CNBB]
- 0.039 Inches Nominal
- Third Tip Style [CNQM]
- Full Radius
- Third Tip Relationship To Preceding Tips [CNQL]
- Not Identical
Similar Supply Items to 9540-01-015-5004
Freight Information 9540-01-015-5004
9540-01-015-5004 has freight characteristics managed by Germany.. 9540-01-015-5004 has a variance between NMFC and UFC when transported by rail and the description should be consulted.