Premium Information is available for this item - Upgrade for $1 a day
9540-00-928-7369
Structural Beam
9540009287369 009287369 QQA200-11 AND10138-0709
A structural shape fabricated from a ferrous or nonferrous material and resembles the following cross-sectional forms: For the letter H, both flanges of the H section are equal or longer than the width measured along the axis of the web; for the letter I, a 16 2/3 percent slope on the inside face of the ferrous type flange, either one or both of the nonferrous type flanges are shorter than the length measured along the axis of the web; for the letters T and Z, on nonferrous type, the web is usually at right angles to the flanges. Letter H section may have a maximum of 5 percent slope on the inside face of the flanges. View more Structural Beam
November 2023
7
Marketplace 9540-00-928-7369
Request a Quotation from participating marketplace vendors
Updated Every 15 Minutes 
Updated Every Day Updated Every Day 
Updated Every Day Related Documents 9540-00-928-7369 5+ Documents (More...)
(Identification) 1/3 NSN 9540-00-928-7369 (Identification) 2/3 NSN 9540-00-928-7369 (Identification
BUY NE FedMall Updated Every Day 9540-00-928-7369 RQST NE Updated Every Day 9540-00-928-7369 RQST
CM2750 AMS-QQ-A-200/3 ASTM B221 QQ-A-200/3 https https//www.nsnlookup.com /fsg-95/fsc-9540/us 9540-00-928-7369
Structural Beam 9540009287369 009287369 Upgrade your Account Upgrade 9540-00-928-7369Structural
Section 005057321 AMS-QQA200- 11 44939 22877 Section 005057321 AMS-QQA200- 11 44939 AMS-QQA200- 11 44939
44939 22877 QQA200-11 https https//www.nsnlookup.com /fsg- PA22211 AMS-QQA200- 11 44939 22877 QQA200
200/3 A structural shape fabricated AMS-QQ-A-200 https//www.nsnlookup.com /fsg-95/fsc-9540/us 9540-00-928-7369
Structural Beam 9540009287369 009287369 Upgrade your Account Upgrade 9540-00-928-7369Structural
PA22211 AMS-QQA200- 11 https - 11 PA22211 AMS-QQA200 - 11 44939 22877 008908135 PA22211 AMS-QQA200
PA22211 44939 AMS-QQA200 - 11 PA22211 PA22211 AMS-QQA200- 11 44939 44939 AMS-QQA200- 11 PA22211
Restrictions 9540-00-928-7369
9540-00-928-7369 is a Structural Beam that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 9540-00-928-7369
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 9540-00-928-7369
- US Army (A920)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- A186
- Supplementary Receivers:
- CT
- Australia (ZA01)
- Effective Date:
- 1 Nov 1994
Approved Sources 9540-00-928-7369
- Part Number
- Manufacturer
- Status
- AND10138-0709
- Manufacturer
- 99237 - Airforce-Navy Aeronautical Design (Active)
- Definitive Standard
- Definitive Standard
- QQA200-11
- 81348 - Federal Specifications Promulgated (Active)
- Incomplete Standard
- Incomplete Standard
Datasheet 9540-00-928-7369
- Characteristic
- Specifications
- FIIG
- Specifications
- A13100
- Basic Shape Style [AGTA]
- Z Shape
- Bottom Flange Width [BQJH]
- 1.000 Inches Nominal
- Fabrication Method [AARN]
- Extruded
- Fillet Radius Where Bottom Right Flange Joins Web Flange/Leg [BPXM]
- 0.125 Inches Nominal
- Fillet Radius Where Top Left Flange Joins Web Flange/Leg [BPXJ]
- 0.125 Inches Nominal
- First Tip Radius [AJJB]
- 0.062 Inches Nominal
- First Tip Style [CMZY]
- Lower Radius
- Heat Treatment [HEAT]
- T-6 Solution Heat Treated
- Material Document And Classification [MDCL]
- Qq-A-200/11 Fed Spec 1St Material Response
- Material [MATT]
- Aluminum Alloy 7075
- Nondefinitive Spec/Std Data [ZZZT]
- T6 Temper
- Left Side Top Flange Thickness [ADXR]
- 0.062 Inches Nominal
- Left Top Inside Angle [CSMZ]
- 90.0 Degrees Nominal
- Length [ABRY]
- 10.000 Feet Minimum And 12.000 Feet Maximum
- Right Bottom Inside Angle [CWKK]
- 90.0 Degrees Nominal
- Right Side Bottom Flange Thickness [BMPQ]
- 0.062 Inches Nominal
- Second Tip Radius [CMZZ]
- 0.062 Inches Nominal
- Second Tip Relationship To First Tip [CNQJ]
- Not Identical
- Second Tip Style [CNQK]
- Upper Radius
- Overall Height [ABKW]
- 0.875 Inches Nominal
- Top Flange Width [BQJG]
- 1.000 Inches Nominal
- Web Flange Thickness [BPXN]
- 0.062 Inches Nominal
- Weight Per Unit Measure [BRFD]
- 0.210 Pounds Per Linear Foot
Weapon Systems (WSDC) 9540-00-928-7369
DLA Procurement Analysis 9540-00-928-7369
- Last Stock Position:
- 556 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 9540-00-928-7369
Army
- Materiel Category and Inventory Manager:
- J
- Ground Forces Support Materiel (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Similar Supply Items to 9540-00-928-7369
Freight Information 9540-00-928-7369
9540-00-928-7369 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 104420. A Sub NMFC of X. It has a NMFC Description of BEAMS NOI I/S. 9540-00-928-7369 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 53800 which rates the freight between FCL and LCL. 9540-00-928-7369 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 576 for ocean manifesting and military sealift. 9540-00-928-7369 is not classified as a special type of cargo when transported by water. 9540-00-928-7369 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 9540-00-928-7369
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- --
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- No Requirement
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
- No Requirement
Contracting Technical Data File (CTDF) 9540-00-928-7369 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- T
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: