Premium Information is available for this item - Upgrade for $1 a day
9540-00-892-2362
Structural Beam
9540008922362 008922362 20960 AMS-QQ-A-200/7 QQ-A-200/7
A structural shape fabricated from a ferrous or nonferrous material and resembles the following cross-sectional forms: For the letter H, both flanges of the H section are equal or longer than the width measured along the axis of the web; for the letter I, a 16 2/3 percent slope on the inside face of the ferrous type flange, either one or both of the nonferrous type flanges are shorter than the length measured along the axis of the web; for the letters T and Z, on nonferrous type, the web is usually at right angles to the flanges. Letter H section may have a maximum of 5 percent slope on the inside face of the flanges. View more Structural Beam
May 2023
10
Marketplace 9540-00-892-2362
Request a Quotation from participating marketplace vendors
Related Documents 9540-00-892-2362 5+ Documents (More...)
AMS-QQ-A-200/7 WIRE,NONELECTRICAL 34 FT NS Request Quotation QQ-A-200/7 WIRE,NONELECTRICAL 7 FT NS Request
.2500D 5456-H111QQ-A-200/7QQ-A-200/7A from a ferrous or AMS-QQ-A-200/7 BEAM,STRUCTURAL 34 EA NS Request
Structural Beam 9540008922362 008922362,20960 AMS-QQ-A-200/7 BEAM,STRUCTURAL 34 FT NS Request Quotation
QQ-A-200/7 BEAM,STRUCTURAL 7 FT NS Request QQ-A-200/7 WIRE,NONELECTRICAL 7 FT NS Request Quotation AMS-QQ-A
QQ-A-200/7 BEAM,STRUCTURAL 7 EA NS Request Quotation AMS-QQ-A-200/7 BEAM,STRUCTURAL 34 EA NS Request
AMS-QQ-A-200/7 BEAM,STRUCTURAL 34 FT NS Request Quotation QQ-A-200/7 BEAM,STRUCTURAL 7 FT NS Request
ASTM-B308 ANGLE,STRUCTURAL 70 FT NS Request Quotation AMS-QQ-A-200/7 ANGLE,STRUCTURAL 34 FT NS Request
ALU MINUM ALLOY, AMS-QQ-A-200/7QQ-A-200/7 28725 A structural shape fabricated from a ferrous or AMS-QQ-A-200/7
AMS-QQ-A-200/7 BEAM,STRUCTURAL 34 FT NS Request Quotation QQ-A-200/7 BEAM,STRUCTURAL 7 FT NS Request
WIRE,NONELECTRICAL 7 FT NS Request Quotation AMS-QQ-A-200/7 WIRE,NONELECTRICAL 34 FT NS Request /fsg
Restrictions 9540-00-892-2362
9540-00-892-2362 is a Structural Beam that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 9540-00-892-2362
- US Navy (N9BZ)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- N9ZD
Approved Sources 9540-00-892-2362
- Part Number
- Manufacturer
- Status
- AMS-QQ-A-200/7
- Manufacturer
- 0U583 - Sae International (Active)
- Incomplete Reference
- Incomplete Reference
- 20960
- 77783 - Alcoa/Reynolds Metals Company (Active)
- Incomplete Reference
- Incomplete Reference
- AMS-QQ-A-200/7
- 81343 - Society Of Automotive Engineers Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- QQ-A-200/7
- 81348 - Federal Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 9540-00-892-2362
- Characteristic
- Specifications
- FIIG
- Specifications
- A13100
- Basic Shape Style [AGTA]
- I Shape
- Bottom Flange Width [BQJH]
- 4.000 Inches Nominal
- Fabrication Method [AARN]
- Extruded
- Fillet Radius Where Bottom Left Flange Joins Web Flange/Leg [BPXK]
- 0.250 Inches Nominal
- Fillet Radius Where Bottom Right Flange Joins Web Flange/Leg [BPXM]
- 0.250 Inches Nominal
- Fillet Radius Where Top Left Flange Joins Web Flange/Leg [BPXJ]
- 0.188 Inches Nominal
- Fillet Radius Where Top Right Flange Joins Web Flange/Leg [BPXL]
- 0.188 Inches Nominal
- First Tip Style [CMZY]
- Square End
- Fourth Tip Relationship To Preceding Tips [CNQN]
- Identical W/First Tip
- Heat Treatment [HEAT]
- H-111 Strain Hardened
- Material [MATT]
- Aluminum Alloy Ams-Qq-A-200/7, Alloy 5456
- Nondefinitive Spec/Std Data [ZZZT]
- H-111 Temper
- Left Side Bottom Flange Thickness [BMPR]
- 0.250 Inches Nominal
- Left Side Bottom Flange Distance To Center Of Both Flanges [BPXF]
- 2.000 Inches Nominal
- Left Side Top Flange Distance To Center Of Both Flanges [BPXD]
- 1.000 Inches Nominal
- Left Side Top Flange Thickness [ADXR]
- 0.250 Inches Nominal
- Left Top Inside Angle [CSMZ]
- 90.0 Degrees Nominal
- Left Bottom Inside Angle [CTBR]
- 90.0 Degrees Nominal
- Length [ABRY]
- 40.000 Feet Nominal
- Right Bottom Inside Angle [CWKK]
- 90.0 Degrees Nominal
- Right Side Bottom Flange Distance To Center Of Both Flanges [BPXH]
- 2.000 Inches Nominal
- Right Side Bottom Flange Thickness [BMPQ]
- 0.250 Inches Nominal
- Right Side Top Flange Distance To Center Of Both Flanges [BPXG]
- 1.000 Inches Nominal
- Right Side Top Flange Thickness [ADXS]
- 0.250 Inches Nominal
- Right Top Inside Angle [CRZC]
- 90.0 Degrees Nominal
- Second Tip Relationship To First Tip [CNQJ]
- Identical
- Overall Height [ABKW]
- 5.000 Inches Nominal
- Top Flange Width [BQJG]
- 2.000 Inches Nominal
- Web Flange Thickness [BPXN]
- 0.188 Inches Nominal
- Weight Per Unit Measure [BRFD]
- 2.780 Pounds Per Linear Foot
- Third Tip Relationship To Preceding Tips [CNQL]
- Identical W/First Tip
DLA Procurement Analysis 9540-00-892-2362
Management Data 9540-00-892-2362
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 9540-00-892-2362
Freight Information 9540-00-892-2362
9540-00-892-2362 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 104420. A Sub NMFC of X. It has a NMFC Description of BEAMS NOI I/S. 9540-00-892-2362 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 53800 which rates the freight between FCL and LCL. 9540-00-892-2362 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 576 for ocean manifesting and military sealift. 9540-00-892-2362 is not classified as a special type of cargo when transported by water. 9540-00-892-2362 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 9540-00-892-2362
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- --
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- No Requirement
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
- No Requirement
Contracting Technical Data File (CTDF) 9540-00-892-2362 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: