Premium Information is available for this item - Upgrade for $1 a day
9540-00-805-8019
Structural Beam
9540008058019 008058019 9125 AMS-QQ-A-200/11 LS4344 QQ-A-200/11
A structural shape fabricated from a ferrous or nonferrous material and resembles the following cross-sectional forms: For the letter H, both flanges of the H section are equal or longer than the width measured along the axis of the web; for the letter I, a 16 2/3 percent slope on the inside face of the ferrous type flange, either one or both of the nonferrous type flanges are shorter than the length measured along the axis of the web; for the letters T and Z, on nonferrous type, the web is usually at right angles to the flanges. Letter H section may have a maximum of 5 percent slope on the inside face of the flanges. View more Structural Beam
January 2023
17
Marketplace 9540-00-805-8019
Request a Quotation from participating marketplace vendors
Updated Every Day Updated Every Day 
Updated Every Day Related Documents 9540-00-805-8019 5+ Documents (More...)
/us 9540-00-528-9125 Structural Angle 9540005289125005289125 Request AMS-QQ-A -200/11 Structural Angle
A AMS-QQ-A -200 /11 https AMS-QQ-A- AMS-QQ-A PA3106 A https//www.nsnlookup.com 9540008058019 008058019,9125
https//www.nsnlookup.com /fsg-95/fsc-9540/us 9540-01-559-5248 Structural Angle 9540015595248015595248 LS4344
008058019 9125 AMS-QQ-A-200/11 LS4344 / / 11 - - AMS-QQ-A -200 /11 - /11 - - AMS-QQ-A https//www.nsnlookup.com
BEAM AMS-QQ-A PA3106 HA18106 https A AMS-QQ-A BEAM AMS-QQ-A PA3106 HA18106 https A AMS-QQ-A -200/11
Structural Angle 9540005289125005289125 Structural Angle 9540005289125005289125 Request AMS-QQ-A -200/11
Structural Beam 9540008058019 008058019,9125 PA3106 /11 AMS-QQ-A /11 - - AMS-QQ-A -200/11 - - 013792405
A AMS-QQ-A -200 /11 https 002881159 https A AMS-QQ-A -200 /11 BEAM 200 AMS-QQ-A-200/ 11 https//www.nsnlookup.com
- - AMS-QQ-A -200/11 BEAM AMS-QQ-A-200/11 /11 AMS-QQ-A -200/11 - - AMS-QQ-A https/ BEAM - - AMS-QQ-A
BEAM - - AMS-QQ-A-200/11 - // AMS-QQ-A - -200/11 - - AMS-QQ-A /11 - - AMS-QQ-A -200/11 - -
Restrictions 9540-00-805-8019
9540-00-805-8019 is a Structural Beam that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
End Users 9540-00-805-8019
- Brazil (YA01)
- Effective Date:
- 1 Jan 2011
- New Zealand (ZE01)
- Effective Date:
- 1 Apr 1991
Approved Sources 9540-00-805-8019
- Part Number
- Manufacturer
- Status
- 9125
- Manufacturer
- 77783 - Alcoa/Reynolds Metals Company (Active)
- Incomplete Reference
- Incomplete Reference
- AMS-QQ-A-200/11
- 0U583 - Sae International (Active)
- Incomplete Reference
- Incomplete Reference
- LS4344
- 98897 - Lockheed Martin Corp (Active)
- Incomplete Reference
- Incomplete Reference
- QQ-A-200/11
- 81348 - Federal Specifications Promulgated (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- AMS-QQ-A-200/11
- 81343 - Society Of Automotive Engineers Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 9540-00-805-8019
- Characteristic
- Specifications
- FIIG
- Specifications
- A13100
- Basic Shape Style [AGTA]
- T Shape
- Fabrication Method [AARN]
- Extruded
- Fillet Radius Where Top Left Flange Joins Web Flange/Leg [BPXJ]
- 0.125 Inches Nominal
- Fillet Radius Where Top Right Flange Joins Web Flange/Leg [BPXL]
- 0.125 Inches Nominal
- First Tip Inner Radius [CNBD]
- 0.031 Inches Nominal
- First Tip Outer Radius [CNBJ]
- 0.031 Inches Nominal
- First Tip Style [CMZY]
- Square W/ Inner And Outer Corner Radii
- Heat Treatment [HEAT]
- T-6 Solution Heat Treated And Artifically Aged
- Material [MATT]
- Aluminum Alloy,Qq-A-200/11,Alloy 7075
- Nondefinitive Spec/Std Data [ZZZT]
- T6 Temper
- Left Side Top Flange Distance To Center Of Both Flanges [BPXD]
- 1.630 Inches Nominal
- Left Side Top Flange Thickness [ADXR]
- 0.125 Inches Nominal
- Left Top Inside Angle [CSMZ]
- 90.0 Degrees Nominal
- Leg Thickness [AJJP]
- 0.078 Inches Nominal
- Length [ABRY]
- 10.000 Feet Minimum And 12.000 Feet Maximum
- Right Side Top Flange Distance To Center Of Both Flanges [BPXG]
- 1.630 Inches Nominal
- Right Side Top Flange Thickness [ADXS]
- 0.125 Inches Nominal
- Right Top Inside Angle [CRZC]
- 90.0 Degrees Nominal
- Second Tip Relationship To First Tip [CNQJ]
- Identical
- Overall Height [ABKW]
- 1.000 Inches Nominal
- Top Flange Width [BQJG]
- 3.260 Inches Nominal
- Weight Per Unit Measure [BRFD]
- 0.600 Pounds Per Linear Foot
- Specification/Standard Data [ZZZK]
- 81348-Qq-A-200/11 Government Specification
- Third Tip Diameter [CNPB]
- 0.188 Inches Nominal
- Third Tip Radius [CNBB]
- 0.062 Inches Nominal
- Third Tip Style [CNQM]
- Left Bulbous
- Third Tip Relationship To Preceding Tips [CNQL]
- Not Identical
Similar Supply Items to 9540-00-805-8019
Freight Information 9540-00-805-8019
9540-00-805-8019 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 013760. A Sub NMFC of X. It has a NMFC Description of ALUM TEES. 9540-00-805-8019 is rated as class 60 when transported by Less-Than Truckload (LTL) freight. 9540-00-805-8019 is rated as class 60 when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 05830 which rates the freight between FCL and LCL. 9540-00-805-8019 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 576 for ocean manifesting and military sealift. 9540-00-805-8019 is not classified as a special type of cargo when transported by water. 9540-00-805-8019 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.