Premium Information is available for this item - Upgrade for $1 a day
9540-00-555-0029
Structural Beam
9540005550029 005550029 AMS-QQ-A-200/3 11415 QQ-A-200/3
A structural shape fabricated from a ferrous or nonferrous material and resembles the following cross-sectional forms: For the letter H, both flanges of the H section are equal or longer than the width measured along the axis of the web; for the letter I, a 16 2/3 percent slope on the inside face of the ferrous type flange, either one or both of the nonferrous type flanges are shorter than the length measured along the axis of the web; for the letters T and Z, on nonferrous type, the web is usually at right angles to the flanges. Letter H section may have a maximum of 5 percent slope on the inside face of the flanges. View more Structural Beam
January 2023
10
Marketplace 9540-00-555-0029
Request a Quotation from participating marketplace vendors
Related Documents 9540-00-555-0029 5+ Documents (More...)
3 FT NS Request Quotation QQ-A-200/3 BEAM ,STRUCTURAL 1 FT NS Request CHANNEL,STRUCTURAL 2 FT AMS-QQ-A
BEAM,STRUCTURAL 3 FT NS Request Quotation QQ-A-200/3 BEAM ,STRUCTURAL CHANNEL,STRUCTURAL 2 FT AMS-QQ-A
3 BEAM ,STRUCTURAL AMS-QQ-A-200/3 BEAM,STRUCTURAL AMS-QQ-A-200/3 BEAM,STRUCTURAL https//www.nsnlookup.com
/fsg-95/fsc-9540/us 9540-00-555-0029 Structural Beam 9540005550029 005550029 BEAM,STRUCTURAL 3 FT NS
,STRUCTURAL AMS-QQ-A-200/3 BEAM,STRUCTURAL Quotation QQ-A-200/3 BEAM ,STRUCTURAL AMS-QQ-A-200/3 BEAM
AMS-QQ-A-200/3 BEAM,STRUCTURAL AMS-QQ-A-200 AMS-QQ-A-200/3 BEAM,STRUCTURAL ,STRUCTURAL AMS-QQ-A-200/
350-6957 Metal Bar 9530013506957 013506957 BEAM ,STRUCTURAL AMS-QQ-A-200/3 BEAM,STRUCTURAL AMS-QQ-A-200
AMS-QQ-A-200/3 BEAM,STRUCTURAL ,STRUCTURAL AMS-QQ-A-200/3 BEAM,STRUCTURAL AMS-QQ-A-200/3 BEAM,STRUCTURAL
QQ-A-200/3 BEAM ,STRUCTURAL AMS-QQ-A-200/3 BEAM,STRUCTURAL Quotation QQ-A-200/3 BEAM https//www.nsnlookup.com
BEAM ,STRUCTURAL AMS-QQ-A -200/3 BEAM,STRUCTURAL AMS-QQ-A-200/3 BEAM,STRUCTURAL BEAM,STRUCTURAL 3
Restrictions 9540-00-555-0029
9540-00-555-0029 is a Structural Beam that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
End Users 9540-00-555-0029
- Brazil (YA01)
- Effective Date:
- 1 Sep 2000
- Greece (ZU01)
- Effective Date:
- 1 Jan 2007
Approved Sources 9540-00-555-0029
- Part Number
- Manufacturer
- Status
- AMS-QQ-A-200/3
- Manufacturer
- 0U583 - Sae International (Active)
- Incomplete Reference
- Incomplete Reference
- 11415
- 77783 - Alcoa/Reynolds Metals Company (Active)
- Incomplete Reference
- Incomplete Reference
- QQ-A-200/3
- 81348 - Federal Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- AMS-QQ-A-200/3
- 81343 - Society Of Automotive Engineers Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 9540-00-555-0029
- Characteristic
- Specifications
- FIIG
- Specifications
- A13100
- Basic Shape Style [AGTA]
- T Shape
- Fabrication Method [AARN]
- Extruded
- Fillet Radius Where Top Left Flange Joins Web Flange/Leg [BPXJ]
- 0.125 Inches Nominal
- Fillet Radius Where Top Right Flange Joins Web Flange/Leg [BPXL]
- 0.125 Inches Nominal
- First Tip Style [CMZY]
- Square End
- Heat Treatment [HEAT]
- T-3511 Solution Heat Treated
- Material Document And Classification [MDCL]
- Qq-A-200/3 Fed Spec 1St Material Response
- Material [MATT]
- Aluminum Alloy 2024
- Nondefinitive Spec/Std Data [ZZZT]
- T3511 Temper
- Left Side Top Flange Distance To Center Of Both Flanges [BPXD]
- 0.750 Inches Nominal
- Left Side Top Flange Thickness [ADXR]
- 0.100 Inches Nominal
- Left Top Inside Angle [CSMZ]
- 90.0 Degrees Nominal
- Leg Thickness [AJJP]
- 0.100 Inches Nominal
- Length [ABRY]
- 10.000 Feet Minimum And 12.000 Feet Maximum
- Right Side Top Flange Distance To Center Of Both Flanges [BPXG]
- 0.750 Inches Nominal
- Right Side Top Flange Thickness [ADXS]
- 0.100 Inches Nominal
- Right Top Inside Angle [CRZC]
- 90.0 Degrees Nominal
- Second Tip Relationship To First Tip [CNQJ]
- Identical
- Overall Height [ABKW]
- 0.950 Inches Nominal
- Top Flange Width [BQJG]
- 1.500 Inches Nominal
- Weight Per Unit Measure [BRFD]
- 0.290 Pounds Per Linear Foot
- Third Tip Relationship To Preceding Tips [CNQL]
- Identical W/First Tip
NATO Stock Numbers Related to 9540-00-555-0029
Freight Information 9540-00-555-0029
9540-00-555-0029 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 013760. A Sub NMFC of X. It has a NMFC Description of ALUM TEES. 9540-00-555-0029 is rated as class 60 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 05830 which rates the freight between FCL and LCL. 9540-00-555-0029 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 576 for ocean manifesting and military sealift. 9540-00-555-0029 is not classified as a special type of cargo when transported by water. 9540-00-555-0029 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.