Premium Information is available for this item - Upgrade for $1 a day
9540-00-540-5976
Structural Beam
9540005405976 005405976 HT182 QQA267 AND10136-1609 AMS-QQ-A-200/3 QQ-A-200/3
A structural shape fabricated from a ferrous or nonferrous material and resembles the following cross-sectional forms: For the letter H, both flanges of the H section are equal or longer than the width measured along the axis of the web; for the letter I, a 16 2/3 percent slope on the inside face of the ferrous type flange, either one or both of the nonferrous type flanges are shorter than the length measured along the axis of the web; for the letters T and Z, on nonferrous type, the web is usually at right angles to the flanges. Letter H section may have a maximum of 5 percent slope on the inside face of the flanges. View more Structural Beam
January 2023
12
Marketplace 9540-00-540-5976
Request a Quotation from participating marketplace vendors
Related Documents 9540-00-540-5976 5+ Documents (More...)
ANGLE,STRUCTURAL 3 EA NS Request Quotation CHANNEL,STRUCTURAL 2 FT AMS-QQ-A-200/3 BEAM Quotation
QQ-A-200 AMS-QQ-A-200/3 BEAM,STRUCTURAL 3 FT 1 EA NS Request Quotation AMS-QQ-A-200/3 ANGLE NS Request
AMS-QQ-A-200/3 BEAM,STRUCTURAL 2 EA NS Request Quotation Subscribe to View Vendor Details... 32003 BEAM
Structural Beam 9540005405976 005405976,HT182 BEAM,STRUCTURAL 3 FT 1 EA NS Request Quotation AMS-QQ-A
QQ-A-200/3 BEAM,STRUCTURAL 1 FT NS Request Quotation AMS-QQ-A-200/3 BEAM,STRUCTURAL 3 FT NS Request Quotation
Structural Beam 9540005405976 005405976,HT182 //www.nsnlookup.com /fsg-95/fsc-9540/us 9540-00-993
Quotation AMS-QQ-A-200/3 ANGLE,STRUCTURAL 3 FT NS Request ANGLE,STRUCTURAL 3 FT NS Request Quotation
Structural Beam 9540005405976 005405976,HT182 BEAM,STRUCTURAL 3 FT 1 EA NS Request Quotation AMS-QQ-A
Structural Beam 9540005405976 005405976,HT182 9540-00-540-5976 9540005405976 005405976 is a structural
Restrictions 9540-00-540-5976
9540-00-540-5976 is a Structural Beam that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
End Users 9540-00-540-5976
- Brazil (YA01)
- Effective Date:
- 1 Sep 2000
- Singapore (YJ01)
- Effective Date:
- 1 Apr 1991
Approved Sources 9540-00-540-5976
- Part Number
- Manufacturer
- Status
- AMS-QQ-A-200/3
- Manufacturer
- 0U583 - Sae International (Active)
- Incomplete Reference
- Incomplete Reference
- HT182
- 10383 - Kaiser Aluminum And Chemical Corp (Active)
- Incomplete Reference
- Incomplete Reference
- QQA267
- 81348 - Federal Specifications (Active)
- Incomplete Standard
- Incomplete Standard
- AND10136-1609
- 99237 - Airforce-Navy Aeronautical Design (Active)
- Incomplete Standard
- Incomplete Standard
- AMS-QQ-A-200/3
- 81343 - Society Of Automotive Engineers Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- QQ-A-200/3
- 81348 - Federal Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 9540-00-540-5976
- Characteristic
- Specifications
- FIIG
- Specifications
- A13100
- Basic Shape Style [AGTA]
- T Shape
- Fabrication Method [AARN]
- Extruded
- Fillet Radius Where Top Left Flange Joins Web Flange/Leg [BPXJ]
- 0.125 Inches Nominal
- Fillet Radius Where Top Right Flange Joins Web Flange/Leg [BPXL]
- 0.125 Inches Nominal
- First Tip Radius [AJJB]
- 0.156 Inches Nominal
- First Tip Style [CMZY]
- Lower Radius
- Heat Treatment [HEAT]
- T-3511 Solution Heat Treated
- Material Document And Classification [MDCL]
- Qq-A-200/11 Fed Spec 1St Material Response
- Material [MATT]
- Aluminum Alloy 7075
- Nondefinitive Spec/Std Data [ZZZT]
- T3511 Temper
- Left Side Top Flange Distance To Center Of Both Flanges [BPXD]
- 0.875 Inches Nominal
- Left Side Top Flange Thickness [ADXR]
- 0.156 Inches Nominal
- Left Top Inside Angle [CSMZ]
- 90.0 Degrees Nominal
- Leg Thickness [AJJP]
- 0.156 Inches Nominal
- Length [ABRY]
- 10.000 Feet Minimum And 12.000 Feet Maximum
- Right Side Top Flange Distance To Center Of Both Flanges [BPXG]
- 0.875 Inches Nominal
- Right Side Top Flange Thickness [ADXS]
- 0.156 Inches Nominal
- Right Top Inside Angle [CRZC]
- 90.0 Degrees Nominal
- Second Tip Relationship To First Tip [CNQJ]
- Identical
- Overall Height [ABKW]
- 1.625 Inches Nominal
- Top Flange Width [BQJG]
- 1.750 Inches Nominal
- Weight Per Unit Measure [BRFD]
- 0.600 Pounds Per Linear Foot
- Third Tip Radius [CNBB]
- 0.078 Inches Nominal
- Third Tip Style [CNQM]
- Full Radius
- Third Tip Relationship To Preceding Tips [CNQL]
- Not Identical
NATO Stock Numbers Related to 9540-00-540-5976
Freight Information 9540-00-540-5976
9540-00-540-5976 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 013760. A Sub NMFC of X. It has a NMFC Description of ALUM TEES. 9540-00-540-5976 is rated as class 60 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 05830 which rates the freight between FCL and LCL. 9540-00-540-5976 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 576 for ocean manifesting and military sealift. 9540-00-540-5976 is not classified as a special type of cargo when transported by water. 9540-00-540-5976 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.