Premium Information is available for this item - Upgrade for $1 a day
9540-00-528-9350
Structural Beam
9540005289350 005289350 AMS-QQ-A-200/11 22541 BAC1505-43495 PA6710 2-283 AMS-QQ-A-200
A structural shape fabricated from a ferrous or nonferrous material and resembles the following cross-sectional forms: For the letter H, both flanges of the H section are equal or longer than the width measured along the axis of the web; for the letter I, a 16 2/3 percent slope on the inside face of the ferrous type flange, either one or both of the nonferrous type flanges are shorter than the length measured along the axis of the web; for the letters T and Z, on nonferrous type, the web is usually at right angles to the flanges. Letter H section may have a maximum of 5 percent slope on the inside face of the flanges. View more Structural Beam
May 2023
15
Marketplace 9540-00-528-9350
Request a Quotation from participating marketplace vendors
Updated Every 15 Minutes 
Updated Every Day Updated Every Day 
Updated Every Day Related Documents 9540-00-528-9350 5+ Documents (More...)
AMS-QQ-A-200/11 BEAM,STRUCTURAL 3 FT NS Request Quotation AMS-QQ-A-200 BEAM,STRUCTURAL 28 FT NS Request
AMS-QQ-A-200/11 BEAM,STRUCTURAL 3 FT NS Request Quotation AMS-QQ-A-200 BEAM,STRUCTURAL 28 FT NS Request
AMS-QQ-A-200 AMS-QQ-A-200/11 22541 BAC1505-43495 /fsg-58/fsc-5845/us 5845-00-889-7642 Scanning Switch
Structural Beam 9540005289350 005289350 9540-00-528-9350Structural Beam9540005289350 005289350
Beam9540005289350 005289350 AMS-QQ-A-200/11 AMS-QQ-A-200/11 BEAM,STRUCTURAL 3 FT NS Request Quotation
A AMS-QQ-A -200 /11 A AMS-QQ-A A AMS-QQ-A -200/11 A AMS-QQ-A -200 /11 A AMS-QQ-A AMS-QQ-A - -200/ / 11
for $1 a day Upgrade your Account Upgrade 5133 https//www.nsnlookup.com /fsg-95/fsc-9540/us 9540-00-528-9350
Structural Beam 9540005289350 005289350 9540-00-528-9350Structural Beam9540005289350 005289350
AMS-QQ-A-200/11 22541 BAC1505-43495 https https//www.nsnlookup.com /fsg-46/fsc-4610/uk 4610-99-722
3308Axial Fan Impeller2930200073308 200073308 43495 9540-00-528-9350Structural Beam9540005289350 005289350
Restrictions 9540-00-528-9350
9540-00-528-9350 is a Structural Beam that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 9540-00-528-9350
- US Air Force (FGGI)
- Effective Date:
- 1 Mar 2006
- United States of America (ZZ)
Approved Sources 9540-00-528-9350
- Part Number
- Manufacturer
- Status
- AMS-QQ-A-200/11
- Manufacturer
- 0U583 - Sae International (Active)
- Incomplete Reference
- Incomplete Reference
- 22541
- 01634 - Aluminum Co Of America (Active)
- Incomplete Reference
- Incomplete Reference
- AMS-QQ-A-200
- 0U583 - Sae International (Active)
- Incomplete Reference
- Incomplete Reference
- BAC1505-43495
- 82918 - The Boeing Company (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- PA6710
- 06012 - Transtar Metals Corp (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- 2-283
- 38597 - Lockheed Martin Corporation (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- AMS-QQ-A-200
- 81343 - Society Of Automotive Engineers Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- AMS-QQ-A-200/11
- 81343 - Society Of Automotive Engineers Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 9540-00-528-9350
- Characteristic
- Specifications
- FIIG
- Specifications
- A13100
- Basic Shape Style [AGTA]
- T Shape
- Fabrication Method [AARN]
- Extruded
- Fillet Radius Where Top Left Flange Joins Web Flange/Leg [BPXJ]
- 0.250 Inches Nominal
- Fillet Radius Where Top Right Flange Joins Web Flange/Leg [BPXL]
- 0.250 Inches Nominal
- First Tip Style [CMZY]
- Square End
- Heat Treatment [HEAT]
- T-6 Solution Heat Treated
- Material [MATT]
- Aluminum Alloy Ams-Qq-A-200/11, Alloy 7075
- Nondefinitive Spec/Std Data [ZZZT]
- T6 Temper
- Left Side Top Flange Distance To Center Of Both Flanges [BPXD]
- 1.375 Inches Nominal
- Left Side Top Flange Thickness [ADXR]
- 0.093 Inches Nominal
- Left Top Inside Angle [CSMZ]
- 90.0 Degrees Nominal
- Leg Thickness [AJJP]
- 0.188 Inches Nominal
- Length [ABRY]
- 10.000 Feet Minimum And 12.000 Feet Maximum
- Right Side Top Flange Distance To Center Of Both Flanges [BPXG]
- 1.375 Inches Nominal
- Right Side Top Flange Thickness [ADXS]
- 0.093 Inches Nominal
- Right Top Inside Angle [CRZC]
- 90.0 Degrees Nominal
- Second Tip Relationship To First Tip [CNQJ]
- Identical
- Overall Height [ABKW]
- 1.375 Inches Nominal
- Top Flange Width [BQJG]
- 2.750 Inches Nominal
- Weight Per Unit Measure [BRFD]
- 0.833 Pounds Per Linear Foot
- Third Tip Relationship To Preceding Tips [CNQL]
- Identical W/First Tip
DLA Procurement Analysis 9540-00-528-9350
Management Data 9540-00-528-9350
Similar Supply Items to 9540-00-528-9350
Freight Information 9540-00-528-9350
9540-00-528-9350 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 104420. A Sub NMFC of X. It has a NMFC Description of BEAMS NOI I/S. 9540-00-528-9350 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 53800 which rates the freight between FCL and LCL. 9540-00-528-9350 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 576 for ocean manifesting and military sealift. 9540-00-528-9350 is not classified as a special type of cargo when transported by water. 9540-00-528-9350 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 9540-00-528-9350 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: