Premium Information is available for this item - Upgrade for $1 a day
9540-00-486-6608
Structural Beam
9540004866608 004866608 AMS-QQ-A-200/11 NAS344-44 QQ-A-200/11 10164542
A structural shape fabricated from a ferrous or nonferrous material and resembles the following cross-sectional forms: For the letter H, both flanges of the H section are equal or longer than the width measured along the axis of the web; for the letter I, a 16 2/3 percent slope on the inside face of the ferrous type flange, either one or both of the nonferrous type flanges are shorter than the length measured along the axis of the web; for the letters T and Z, on nonferrous type, the web is usually at right angles to the flanges. Letter H section may have a maximum of 5 percent slope on the inside face of the flanges. View more Structural Beam
January 2023
10
Marketplace 9540-00-486-6608
Request a Quotation from participating marketplace vendors
Related Documents 9540-00-486-6608 5+ Documents (More...)
Quotation AMS-QQ-A-200/11 ANGLE,STRUCTURAL 3 EA NS Request Quotation QQA200-11 ANGLE,STRUCTURAL
BEAM,STRUCTURAL 3 EA NS Request Quotation AMS-QQ-A-200/11 ANGLE,STRUCTURAL 3 EA NS Request Quotation
BEAM,STRUCTURAL 3 EA NS Request Quotation AMS-QQ-A-200/11 ANGLE,STRUCTURAL 3 EA NS Request Quotation
Quotation AMS-QQ-A-200/11 ANGLE,STRUCTURAL 3 EA NS Request Quotation QQA200-11 ANGLE,STRUCTURAL
QQA200-11 ANGLE,STRUCTURAL BEAM,STRUCTURAL 3 EA NS Request Quotation AMS-QQ-A-200/11 ANGLE,STRUCTURAL
Quotation AMS-QQ-A-200/11 ANGLE,STRUCTURAL 3 EA NS Request Quotation QQA200-11 ANGLE,STRUCTURAL
QQA200-11 ANGLE,STRUCTURAL BEAM,STRUCTURAL 3 EA NS Request Quotation AMS-QQ-A-200/11 ANGLE,STRUCTURAL
Quotation AMS-QQ-A-200/11 ANGLE,STRUCTURAL 3 EA NS Request Quotation QQA200-11 ANGLE,STRUCTURAL
ANGLE,STRUCTURAL Quotation AMS-QQ-A-200/11 ANGLE,STRUCTURAL 3 EA NS Request Quotation QQA200-
ANGLE,STRUCTURAL 3 EA NS Request Quotation Quotation AMS-QQ-A-200/11 ANGLE,STRUCTURAL 3 EA NS
Restrictions 9540-00-486-6608
9540-00-486-6608 is a Structural Beam that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
End Users 9540-00-486-6608
- Finland (WF01)
- Effective Date:
- 1 Jul 2009
- Canada (ZC01)
- Effective Date:
- 1 Apr 1991
Approved Sources 9540-00-486-6608
- Part Number
- Manufacturer
- Status
- AMS-QQ-A-200/11
- Manufacturer
- 0U583 - Sae International (Active)
- Incomplete Reference
- Incomplete Reference
- NAS344-44
- 80205 - National Aerospace Standards (Active)
- Incomplete Reference
- Incomplete Reference
- QQ-A-200/11
- 81348 - Federal Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- AMS-QQ-A-200/11
- 81343 - Society Of Automotive Engineers Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- 10164542
- A486G - Nimikkeistokeskus Ncb Finland (Active)
- NATO Reference
- NATO Reference
Datasheet 9540-00-486-6608
- Characteristic
- Specifications
- FIIG
- Specifications
- A13100
- Basic Shape Style [AGTA]
- T Shape
- Fabrication Method [AARN]
- Extruded
- Fillet Radius Where Top Left Flange Joins Web Flange/Leg [BPXJ]
- 0.125 Inches Nominal
- Fillet Radius Where Top Right Flange Joins Web Flange/Leg [BPXL]
- 0.125 Inches Nominal
- First Tip Radius [AJJB]
- 0.078 Inches Nominal
- First Tip Style [CMZY]
- Lower Radius
- Heat Treatment [HEAT]
- T-73511 Solution Heat Treated
- Material Document And Classification [MDCL]
- Qq-A-200/11 Fed Spec 1St Material Response
- Material [MATT]
- Aluminum Alloy 7075
- Nondefinitive Spec/Std Data [ZZZT]
- T73511 Temper
- Left Side Top Flange Distance To Center Of Both Flanges [BPXD]
- 0.875 Inches Nominal
- Left Side Top Flange Thickness [ADXR]
- 0.078 Inches Nominal
- Left Top Inside Angle [CSMZ]
- 90.0 Degrees Nominal
- Leg Thickness [AJJP]
- 0.078 Inches Nominal
- Length [ABRY]
- 10.000 Feet Minimum And 12.000 Feet Maximum
- Right Side Top Flange Distance To Center Of Both Flanges [BPXG]
- 0.875 Inches Nominal
- Right Side Top Flange Thickness [ADXS]
- 0.078 Inches Nominal
- Right Top Inside Angle [CRZC]
- 90.0 Degrees Nominal
- Second Tip Relationship To First Tip [CNQJ]
- Identical
- Overall Height [ABKW]
- 1.375 Inches Nominal
- Top Flange Width [BQJG]
- 1.750 Inches Nominal
- Weight Per Unit Measure [BRFD]
- 0.290 Pounds Per Linear Foot
- Specification/Standard Data [ZZZK]
- 80205-Nas344 Professional/Industrial Association Standard
- Third Tip Radius [CNBB]
- 0.039 Inches Nominal
- Third Tip Relationship To Preceding Tips [CNQL]
- Not Identical
- Third Tip Style [CNQM]
- Full Radius
NATO Stock Numbers Related to 9540-00-486-6608
Freight Information 9540-00-486-6608
9540-00-486-6608 has freight characteristics managed by the Southwestern Power Administration.. 9540-00-486-6608 has a variance between NMFC and UFC when transported by rail and the description should be consulted.
Packaging Data 9540-00-486-6608
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- --
- --
- --
- --
- --
- --
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- No Requirement
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
- No Requirement