Premium Information is available for this item - Upgrade for $1 a day
9540-00-452-2089
Structural Beam
9540004522089 004522089 DIE LS 5326 T2189 60-2148 LS5326 QQ-A-200/11 AMS-QQ-A-200/11 PA18359 50055
A structural shape fabricated from a ferrous or nonferrous material and resembles the following cross-sectional forms: For the letter H, both flanges of the H section are equal or longer than the width measured along the axis of the web; for the letter I, a 16 2/3 percent slope on the inside face of the ferrous type flange, either one or both of the nonferrous type flanges are shorter than the length measured along the axis of the web; for the letters T and Z, on nonferrous type, the web is usually at right angles to the flanges. Letter H section may have a maximum of 5 percent slope on the inside face of the flanges. View more Structural Beam
May 2023
15
Marketplace 9540-00-452-2089
Request a Quotation from participating marketplace vendors
Related Documents 9540-00-452-2089 5+ Documents (More...)
ANGLE Quotation AMS-QQ-A-200/11 ANGLE,STRUCTURAL 3 EA NS Request Quotation QQA200-11 ANGLE,STRUCTURAL
ANGLE BEAM,STRUCTURAL 3 EA NS Request Quotation AMS-QQ-A-200/11 ANGLE,STRUCTURAL 3 EA NS Request
AMS-QQ-A-200/11 ANGLE,STRUCTURAL 3 EA NS Request Quotation AMS-QQ-A200/11 ANGLE,STRUCTURAL 45 EA NS
ANGLE,STRUCTURAL Quotation AMS-QQ-A-200/11 ANGLE,STRUCTURAL 3 EA NS Request Quotation QQA200-
BEAM,STRUCTURAL 3 EA NS Request Quotation AMS-QQ-A-200/11 ANGLE,STRUCTURAL 3 EA NS Request Quotation
QQA200-11 ANGLE,STRUCTURAL BEAM,STRUCTURAL 3 EA NS Request Quotation AMS-QQ-A-200/11 ANGLE Quotation
Quotation AMS-QQ-A-200/11 ANGLE,STRUCTURAL 3 EA NS Request Quotation QQA200-11 ANGLE,STRUCTURAL https
BEAM,STRUCTURAL 3 EA NS Request Quotation AMS-QQ-A-200/11 ANGLE,STRUCTURAL 3 EA NS Request Quotation
ANGLE,STRUCTURAL Quotation AMS-QQ-A-200/11 ANGLE,STRUCTURAL 3 EA NS Request Quotation QQA200-
ANGLE,STRUCTURAL 3 EA NS Request Quotation Quotation AMS-QQ-A-200/11 ANGLE,STRUCTURAL 3 EA NS
Restrictions 9540-00-452-2089
9540-00-452-2089 is a Structural Beam that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 9540-00-452-2089
- US Air Force (FGGI)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- FGKZ
- Canada (ZC01)
- Effective Date:
- 1 Feb 2016
Approved Sources 9540-00-452-2089
- Part Number
- Manufacturer
- Status
- DIE LS 5326
- Manufacturer
- 98897 - Lockheed Martin Corp (Active)
- Incomplete Reference
- Incomplete Reference
- T2189
- 03462 - Howmet Corporation (Active)
- Secondary Buy
- Secondary Buy
- 60-2148
- 29321 - Transtar Metals Corp (Active)
- Secondary Buy
- Secondary Buy
- LS5326
- 98897 - Lockheed Martin Corp (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- QQ-A-200/11
- 81348 - Federal Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- AMS-QQ-A-200/11
- 81343 - Society Of Automotive Engineers Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- PA18359
- 06012 - Transtar Metals Corp (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- 50055
- 27610 - International Light Metals Corp Sub (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 9540-00-452-2089
- Characteristic
- Specifications
- FIIG
- Specifications
- A13100
- Basic Shape Style [AGTA]
- T Shape
- Fabrication Method [AARN]
- Extruded
- Fillet Radius Where Top Left Flange Joins Web Flange/Leg [BPXJ]
- 0.094 Inches Nominal
- Fillet Radius Where Top Right Flange Joins Web Flange/Leg [BPXL]
- 0.094 Inches Nominal
- First Tip Style [CMZY]
- Square End
- Heat Treatment [HEAT]
- T-6 Solution Heat Treated
- Material [MATT]
- Aluminum Alloy Ams-Qq-A-200/11, Alloy 7075
- Nondefinitive Spec/Std Data [ZZZT]
- T6 Temper
- Left Side Top Flange Distance To Center Of Both Flanges [BPXD]
- 1.550 Inches Nominal
- Left Side Top Flange Thickness [ADXR]
- 0.094 Inches Nominal
- Left Top Inside Angle [CSMZ]
- 90.0 Degrees Nominal
- Leg Thickness [AJJP]
- 0.094 Inches Nominal
- Length [ABRY]
- 10.000 Feet Minimum And 12.000 Feet Maximum
- Right Side Top Flange Distance To Center Of Both Flanges [BPXG]
- 1.550 Inches Nominal
- Right Side Top Flange Thickness [ADXS]
- 0.094 Inches Nominal
- Right Top Inside Angle [CRZC]
- 90.0 Degrees Nominal
- Second Tip Relationship To First Tip [CNQJ]
- Identical
- Overall Height [ABKW]
- 1.500 Inches Nominal
- Top Flange Width [BQJG]
- 3.100 Inches Nominal
- Weight Per Unit Measure [BRFD]
- 0.292 Pounds Per Linear Foot
- Third Tip Relationship To Preceding Tips [CNQL]
- Identical W/First Tip
DLA Procurement Analysis 9540-00-452-2089
Management Data 9540-00-452-2089
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- V
- The current standard price has been validated.
The item has been analyzed in conjunction with the Zero Overpricing Program and is in the accepted price range.
The item was procured under open competition and under the competitive arena the price is considered fair and reasonable.
ZOP or Standard price challenges are permissible but must be supported by adequate justification.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 9540-00-452-2089
Freight Information 9540-00-452-2089
9540-00-452-2089 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 104420. A Sub NMFC of X. It has a NMFC Description of BEAMS NOI I/S. 9540-00-452-2089 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 53800 which rates the freight between FCL and LCL. 9540-00-452-2089 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 576 for ocean manifesting and military sealift. 9540-00-452-2089 is not classified as a special type of cargo when transported by water. 9540-00-452-2089 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 9540-00-452-2089
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- --
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- No Requirement
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
- No Requirement
Procurement History 9540-00-452-2089 2 Records
Contracting Technical Data File (CTDF) 9540-00-452-2089 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: