9540-00-446-0882

United States (US) 4. 9540-00-446-0882 Marketplace Restrictions Approved Sources Datasheet Management
Request a Quotation from participating marketplace vendors Request Updated Every Day 9540-00-446-0882
RQST Updated Every Day 9540-00-446-0882 RQST NE Related Documents 9540-00-446-0882 5+ Documents ( More

enable JavaScript in your web browser . 4820-99-560-2791Stop-Check Valve4820995602791 995602791 004460882
www.nsnlookup.com /fsg-48/fsc-4820/uk 4820-99-560-2791 https//www.nsnlookup.com /fsg-95/fsc-9540/us 9540-00-446-0882
9540004460882 004460882 Here are instructions how to enable JavaScript in your web browser . 9540

5315-99-560-2926 5315995602926 995602926 is a half round, cylindrical, or flat piece of metal, bent to form a straight or crimped two-pronged device with an eye at one end, for inserting in a hole drilled at right angle to the axis of the stud, shaft, or like item. its ends are separable or one end is bent to hold it in place.

5310-99-560-2805 5310995602805 995602805 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

5315-99-977-1996 5315999771996 999771996 is a half round, cylindrical, or flat piece of metal, bent to form a straight or crimped two-pronged device with an eye at one end, for inserting in a hole drilled at right angle to the axis of the stud, shaft, or like item. its ends are separable or one end is bent to hold it in place.