Premium Information is available for this item - Upgrade for $1 a day
9540-00-261-5610
Structural Beam
9540002615610 002615610 AMS-4154 ALLOY7075 TMPRT6 AMS10136-3006 AMS4154 AND10136-3006 AMS-QQ-A-200/11 ALLOY7075 TMPRT6 AMS-QQA-200/11 QQ-A-200/11
A structural shape fabricated from a ferrous or nonferrous material and resembles the following cross-sectional forms: For the letter H, both flanges of the H section are equal or longer than the width measured along the axis of the web; for the letter I, a 16 2/3 percent slope on the inside face of the ferrous type flange, either one or both of the nonferrous type flanges are shorter than the length measured along the axis of the web; for the letters T and Z, on nonferrous type, the web is usually at right angles to the flanges. Letter H section may have a maximum of 5 percent slope on the inside face of the flanges. View more Structural Beam
November 2023
13
Marketplace 9540-00-261-5610
Request a Quotation from participating marketplace vendors
Updated Every Day Updated Every Day 
Updated Every Day Related Documents 9540-00-261-5610 5+ Documents (More...)
(Identification) 1/3 NSN 9540-00-261-5610 (Identification) 2/3 NSN 9540-00-261-5610 (Identification
RQST NE Updated Every Day 9540-00-261-5610 RQST Updated Every Day 9540-00-261-5610 RQST NE Related
5610 Structural Beam 9540002615610 002615610 AND10136-3006 AMS-QQ-A-200/11 ALLOY7075 TMPRT6 AMS-QQA
Structural Beam 9540002615610 002615610 ALLOY7075 TMPRT6 AMS10136-3006 AMS4154 QQ-A-200/11 AND10136
QQ-A-200/11 BEAM,STRUCTURAL 4 FT NS Request Quotation QQA200-11 BEAM,STRUCTURAL 603 FT NS Request Quotation
ANGLE,STRUCTURAL 2 FT NS Request Quotation QQ-A-200/11 ANGLE,STRUCTURAL 4 FT NS Request Quotation
QQ-A-200/11 BEAM,STRUCTURAL 4 FT NS Request Quotation QQA200-11 BEAM,STRUCTURAL 603 FT NS Request
Structural Beam 9540002615610 002615610 ALLOY7075 TMPRT6 AMS-QQA-200/11QQ-A-200/11 A structural
A AMS-QQ-A-200 /11 A AMS-QQ-A A AMS-QQ-A A AMS-QQ-A 9530014529129014529129 A AMS-QQ-A -200 /11 A
ferrous or nonferrous A 9530010299043010299043 A A AMS-QQ-A -200 /11 A AMS-QQ-A-200 /11 A AMS-QQ-A A
Restrictions 9540-00-261-5610
9540-00-261-5610 is a Structural Beam that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 9540-00-261-5610
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 9540-00-261-5610
- US Air Force (FGGI)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- FGKZ
- US Navy (N9BZ)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- N9ZD
- Supplementary Collaborators:
- GT
- Republic of Korea (ZH01)
- Effective Date:
- 1 Apr 1991
Approved Sources 9540-00-261-5610
- Part Number
- Manufacturer
- Status
- AMS-4154 ALLOY7075 TMPRT6
- Manufacturer
- 0U583 - Sae International (Active)
- Incomplete Reference
- Incomplete Reference
- AMS10136-3006
- 81346 - American Society For Testing And (Active)
- Incomplete Reference
- Incomplete Reference
- AMS4154
- 0U583 - Sae International (Active)
- Incomplete Reference
- Incomplete Reference
- AMS4154
- 81343 - Society Of Automotive Engineers Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- AND10136-3006
- 99237 - Airforce-Navy Aeronautical Design (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- AMS-4154 ALLOY7075 TMPRT6
- 81343 - Society Of Automotive Engineers Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- AMS-QQ-A-200/11 ALLOY7075 TMPRT6
- 81343 - Society Of Automotive Engineers Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- AMS-QQA-200/11
- 81343 - Society Of Automotive Engineers Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- QQ-A-200/11
- 81348 - Federal Specifications Promulgated (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 9540-00-261-5610
- Characteristic
- Specifications
- FIIG
- Specifications
- A13100
- Basic Shape Style [AGTA]
- T Shape
- Fabrication Method [AARN]
- Extruded
- Fillet Radius Where Top Left Flange Joins Web Flange/Leg [BPXJ]
- 0.188 Inches Nominal
- Fillet Radius Where Top Right Flange Joins Web Flange/Leg [BPXL]
- 0.188 Inches Nominal
- First Tip Radius [AJJB]
- 0.188 Inches Nominal
- First Tip Style [CMZY]
- Lower Radius
- Heat Treatment [HEAT]
- T-6 Solution Heat Treated
- Material [MATT]
- Aluminum Alloy Ams-Qq-A-200/11, Allpy 7075
- Nondefinitive Spec/Std Data [ZZZT]
- T6 Temper
- Left Side Top Flange Distance To Center Of Both Flanges [BPXD]
- 1.500 Inches Nominal
- Left Side Top Flange Thickness [ADXR]
- 0.188 Inches Nominal
- Left Top Inside Angle [CSMZ]
- 90.0 Degrees Nominal
- Leg Thickness [AJJP]
- 0.188 Inches Nominal
- Length [ABRY]
- 10.000 Feet Minimum And 12.000 Feet Maximum
- Right Side Top Flange Distance To Center Of Both Flanges [BPXG]
- 1.500 Inches Nominal
- Right Side Top Flange Thickness [ADXS]
- 0.188 Inches Nominal
- Right Top Inside Angle [CRZC]
- 90.0 Degrees Nominal
- Second Tip Relationship To First Tip [CNQJ]
- Identical
- Overall Height [ABKW]
- 2.500 Inches Nominal
- Weight Per Unit Measure [BRFD]
- 1.190 Pounds Per Linear Foot
- Third Tip Relationship To Preceding Tips [CNQL]
- Not Identical
- Third Tip Style [CNQM]
- Full Radius
- Third Tip Radius [CNBB]
- 0.094 Inches Nominal
- Top Flange Width [BQJG]
- 3.000 Inches Nominal
Weapon Systems (WSDC) 9540-00-261-5610
DLA Procurement Analysis 9540-00-261-5610
- Last Stock Position:
- 97 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 9540-00-261-5610
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 9540-00-261-5610
Freight Information 9540-00-261-5610
9540-00-261-5610 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 104420. A Sub NMFC of X. It has a NMFC Description of BEAMS NOI I/S. 9540-00-261-5610 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 53800 which rates the freight between FCL and LCL. 9540-00-261-5610 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 576 for ocean manifesting and military sealift. 9540-00-261-5610 is not classified as a special type of cargo when transported by water. 9540-00-261-5610 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 9540-00-261-5610
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- --
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- No Requirement
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
- No Requirement
Contracting Technical Data File (CTDF) 9540-00-261-5610 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: