Premium Information is available for this item - Upgrade for $1 a day
9540-00-241-9373
Structural Beam
9540002419373 002419373 1468513 AMS-QQA200-11 AND10136-1605 QQA200-11
A structural shape fabricated from a ferrous or nonferrous material and resembles the following cross-sectional forms: For the letter H, both flanges of the H section are equal or longer than the width measured along the axis of the web; for the letter I, a 16 2/3 percent slope on the inside face of the ferrous type flange, either one or both of the nonferrous type flanges are shorter than the length measured along the axis of the web; for the letters T and Z, on nonferrous type, the web is usually at right angles to the flanges. Letter H section may have a maximum of 5 percent slope on the inside face of the flanges. View more Structural Beam
January 2023
15
Marketplace 9540-00-241-9373
Request a Quotation from participating marketplace vendors
Updated Every Day Updated Every Day 
Updated Every Day Related Documents 9540-00-241-9373 5+ Documents (More...)
44939 PA22211 44939 AMS-QQA200- 11 PA22211 AMS-QQA200 QQA200 - 11 PA22211 PA22211 AMS-QQA200- 11
- 11 PA22211 AMS-QQA200- 11 PA22211 AMS-QQA200- 11 PA22211 AMS-QQA200- 11 - 11 PA22211 https// PA22211
44939 AMS-QQA200- 11 PA22211 AMS-QQA200- 11 PA22211 AMS-QQA200- 11 AMS-QQA200- 11 PA22211 AMS-QQA200
PA22211 44939 AMS-QQA200- 11 PA22211 AMS-QQA200 QQA200 - 11 PA22211 PA22211 AMS-QQA200 - 11 44939 22877
-00-241-9373 Structural Beam 9540002419373 002419373 Angle 9540007204671007204671 PA22211 AMS-QQA200-
-11 PA22211 44939 A AMS-QQA200- 11 PA22211 https// PA22211 44939 AMS-QQA200- 11 PA22211 AMS-QQA200 QQA200
44939 22877 QQA200-11 PA22211 44939 AMS-QQA200- 11 PA22211 AMS-QQA200- 11 PA22211 AMS-QQA200- 11
AMS-QQA200- 11 PA22211 AMS-QQA200- 11 44939 AMS-QQA200- 11 PA22211 https//www.nsnlookup.com /fsg-95/
/QQ-A-200/11-T6511 AND10136-1605 QQ-A-200/11 A structural shape fabricated from a ferrous or nonferrous
,STRUCTURAL 16 FT NS Request Quotation AMS-QQ-A200/11 BEAM,STRUCTURAL 45 FT NS Request Quotation QQA200-11
Restrictions 9540-00-241-9373
9540-00-241-9373 is a Structural Beam that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
End Users 9540-00-241-9373
- United Kingdom (ZK01)
- Effective Date:
- 1 Apr 1991
Approved Sources 9540-00-241-9373
- Part Number
- Manufacturer
- Status
- 1468513
- Manufacturer
- 88277 - The Boeing Company (Active)
- Incomplete Reference
- Incomplete Reference
- AMS-QQA200-11
- 0U583 - Sae International (Active)
- Incomplete Reference
- Incomplete Reference
- AND10136-1605
- 99237 - Airforce-Navy Aeronautical Design (Active)
- Incomplete Standard
- Incomplete Standard
- 1468513
- 18355 - The Boeing Company (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- QQA200-11
- 81348 - Federal Specifications Promulgated (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- AMS-QQA200-11
- 81343 - Society Of Automotive Engineers Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 9540-00-241-9373
- Characteristic
- Specifications
- FIIG
- Specifications
- A13100
- Basic Shape Style [AGTA]
- T Shape
- Fabrication Method [AARN]
- Extruded
- Fillet Radius Where Top Left Flange Joins Web Flange/Leg [BPXJ]
- 0.125 Inches Nominal
- Fillet Radius Where Top Right Flange Joins Web Flange/Leg [BPXL]
- 0.125 Inches Nominal
- First Tip Radius [AJJB]
- 0.094 Inches Nominal
- First Tip Style [CMZY]
- Lower Radius
- Heat Treatment [HEAT]
- T-6 Solution Heat Treated
- Material Document And Classification [MDCL]
- Qq-A-200/11 Fed Spec 1St Material Response
- Material [MATT]
- Aluminum Alloy 7075
- Nondefinitive Spec/Std Data [ZZZT]
- T6 Temper
- Left Side Top Flange Distance To Center Of Both Flanges [BPXD]
- 0.875 Inches Nominal
- Left Side Top Flange Thickness [ADXR]
- 0.094 Inches Nominal
- Left Top Inside Angle [CSMZ]
- 90.0 Degrees Nominal
- Leg Thickness [AJJP]
- 0.094 Inches Nominal
- Length [ABRY]
- 10.000 Feet Minimum And 12.000 Feet Maximum
- Right Side Top Flange Distance To Center Of Both Flanges [BPXG]
- 0.875 Inches Nominal
- Right Side Top Flange Thickness [ADXS]
- 0.094 Inches Nominal
- Right Top Inside Angle [CRZC]
- 90.0 Degrees Nominal
- Second Tip Relationship To First Tip [CNQJ]
- Identical
- Overall Height [ABKW]
- 1.375 Inches Nominal
- Weight Per Unit Measure [BRFD]
- 0.348 Pounds Per Linear Foot
- Third Tip Radius [CNBB]
- 0.047 Inches Nominal
- Third Tip Relationship To Preceding Tips [CNQL]
- Not Identical
- Third Tip Style [CNQM]
- Full Radius
- Top Flange Width [BQJG]
- 1.750 Inches Nominal
Similar Supply Items to 9540-00-241-9373
Freight Information 9540-00-241-9373
9540-00-241-9373 has freight characteristics.. 9540-00-241-9373 has a variance between NMFC and UFC when transported by rail and the description should be consulted.