Premium Information is available for this item - Upgrade for $1 a day
9540-00-236-3943
Structural Beam
9540002363943 002363943 AMS-QQA200-3 AND10136-2401 QQA200-3
A structural shape fabricated from a ferrous or nonferrous material and resembles the following cross-sectional forms: For the letter H, both flanges of the H section are equal or longer than the width measured along the axis of the web; for the letter I, a 16 2/3 percent slope on the inside face of the ferrous type flange, either one or both of the nonferrous type flanges are shorter than the length measured along the axis of the web; for the letters T and Z, on nonferrous type, the web is usually at right angles to the flanges. Letter H section may have a maximum of 5 percent slope on the inside face of the flanges. View more Structural Beam
January 2023
13
Marketplace 9540-00-236-3943
Request a Quotation from participating marketplace vendors
Related Documents 9540-00-236-3943 5+ Documents (More...)
AMS-QQA200-3 A structural shape fabricated from a ferrous or nonferrous material and has a flange
A structural shape fabricated from a ferrous or nonferrous material and resembling the AMS-QQA200-3
Beam9540000082215 000082215AMS-QQA200-3LS10138-1004-2AND10138-1004QQA200-3 A structural shape fabricated AMS-QQA200-3
www.nsnlookup.com /fsg-95/fsc-9540/us 9540-00-085-0558 Structural Angle 9540000850558 000850558 AMS-QQA200-3
www.nsnlookup.com /fsg-95/fsc-9540/us 9540-00-085-0558 Structural Angle 9540000850558 000850558 AMS-QQA200-3
your Account Upgrade 9540-00-008-2223Structural Channel9540000082223 000082223LSM16021QQA200 -3 AMS-QQA200-3
A AMS-QQA200-3 A structural shape fabricated from a ferrous or nonferrous material and has a flange
A AMS-QQA200-3 A structural shape fabricated from a ferrous or nonferrous material and has a flange
AMS-QQA200-3 A structural shape fabricated from a ferrous or nonferrous material and has a flange
A structural shape fabricated from a ferrous or nonferrous material and resembling the AMS-QQA200-3
Restrictions 9540-00-236-3943
9540-00-236-3943 is a Structural Beam that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
End Users 9540-00-236-3943
- Brazil (YA01)
- Effective Date:
- 1 Aug 2000
- Portugal (ZP01)
- Effective Date:
- 1 Apr 1991
- Turkey (ZW01)
- Effective Date:
- 1 Nov 2005
Approved Sources 9540-00-236-3943
- Part Number
- Manufacturer
- Status
- AMS-QQA200-3
- Manufacturer
- 0U583 - Sae International (Active)
- Incomplete Reference
- Incomplete Reference
- AND10136-2401
- 99237 - Airforce-Navy Aeronautical Design (Active)
- Incomplete Standard
- Incomplete Standard
- QQA200-3
- 81348 - Federal Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- AMS-QQA200-3
- 81343 - Society Of Automotive Engineers Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 9540-00-236-3943
- Characteristic
- Specifications
- FIIG
- Specifications
- A13100
- Basic Shape Style [AGTA]
- T Shape
- Fabrication Method [AARN]
- Extruded
- Fillet Radius Where Top Left Flange Joins Web Flange/Leg [BPXJ]
- 0.125 Inches Nominal
- Fillet Radius Where Top Right Flange Joins Web Flange/Leg [BPXL]
- 0.125 Inches Nominal
- First Tip Radius [AJJB]
- 0.094 Inches Nominal
- First Tip Style [CMZY]
- Lower Radius
- Heat Treatment [HEAT]
- T-4 Solution Heat Treated And Natural Aged
- Material [MATT]
- Aluminum Alloy,Qq-A-200/3,Alloy 2024
- Nondefinitive Spec/Std Data [ZZZT]
- T4 Temper
- Left Side Top Flange Distance To Center Of Both Flanges [BPXD]
- 1.250 Inches Nominal
- Left Side Top Flange Thickness [ADXR]
- 0.094 Inches Nominal
- Left Top Inside Angle [CSMZ]
- 90.0 Degrees Nominal
- Leg Thickness [AJJP]
- 0.094 Inches Nominal
- Length [ABRY]
- 10.000 Feet Minimum And 12.000 Feet Maximum
- Right Side Top Flange Distance To Center Of Both Flanges [BPXG]
- 1.250 Inches Nominal
- Right Side Top Flange Thickness [ADXS]
- 0.094 Inches Nominal
- Right Top Inside Angle [CRZC]
- 90.0 Degrees Nominal
- Second Tip Relationship To First Tip [CNQJ]
- Identical
- Overall Height [ABKW]
- 1.250 Inches Nominal
- Weight Per Unit Measure [BRFD]
- 0.415 Pounds Per Linear Foot
- Third Tip Radius [CNBB]
- 0.047 Inches Nominal
- Third Tip Relationship To Preceding Tips [CNQL]
- Not Identical
- Third Tip Style [CNQM]
- Full Radius
- Top Flange Width [BQJG]
- 2.500 Inches Nominal
NATO Stock Numbers Related to 9540-00-236-3943
Freight Information 9540-00-236-3943
9540-00-236-3943 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 013760. A Sub NMFC of X. It has a NMFC Description of ALUM TEES. 9540-00-236-3943 is rated as class 60 when transported by Less-Than Truckload (LTL) freight. 9540-00-236-3943 is rated as class 60 when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 05830 which rates the freight between FCL and LCL. 9540-00-236-3943 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 576 for ocean manifesting and military sealift. 9540-00-236-3943 is not classified as a special type of cargo when transported by water. 9540-00-236-3943 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 9540-00-236-3943
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- --
- --
- --
- --
- --
- --
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- No Requirement
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
- No Requirement