Premium Information is available for this item - Upgrade for $1 a day
9540-00-148-4818
Structural Beam
9540001484818 001484818 AMS-QQ-A-200/3 AND10136-1401 QQA200-3
A structural shape fabricated from a ferrous or nonferrous material and resembles the following cross-sectional forms: For the letter H, both flanges of the H section are equal or longer than the width measured along the axis of the web; for the letter I, a 16 2/3 percent slope on the inside face of the ferrous type flange, either one or both of the nonferrous type flanges are shorter than the length measured along the axis of the web; for the letters T and Z, on nonferrous type, the web is usually at right angles to the flanges. Letter H section may have a maximum of 5 percent slope on the inside face of the flanges. View more Structural Beam
July 2023
18
Marketplace 9540-00-148-4818
Request a Quotation from participating marketplace vendors
Related Documents 9540-00-148-4818 5+ Documents (More...)
(Identification) 1/3 NSN 9540-00-148-4818 (Identification) 2/3 NSN 9540-00-148-4818 (Identification
Every Day 9540-00-148-4818 RQST Updated Every Day 9540-00-148-4818 RQST NE Related Documents 9540-00
https//www.nsnlookup.com /fsg-95/fsc-9540/us 9540-00-148-4818 Structural Beam 9540001484818 001484818
Upgrade your Account Upgrade 9540-00-148-4818Structural Beam9540001484818 001484818 AMS-QQ-A-200/3 AND10136
https//www.nsnlookup.com /fsg-95/fsc-9540/us 9540-00-148-4818 Structural Beam 9540001484818 001484818
Upgrade your Account Upgrade 9540-00-148-4818Structural Beam9540001484818 001484818 AMS-QQ-A-200/3 AND10136
QQ-A200/3 STRUCTURAL SECTION,SPECIAL SHAPED 567 EA NS Request Quotation AMS-QQ-A-200/3 STRUCTURAL SECTION
AMS-QQ-A-200/3 STRUCTURAL SECTION,SPECIAL SHAPED 3 FT NS Request Quotation QQ-A200/3 STRUCTURAL SECTION
,QQA200-3 // AMS-QQA225 https//www.nsnlookup.com -T4-0.312X1.500X10 QQA200-3 QQA225-6 A metallic or
nonferrous ,QQA200-3 // AMS-QQA225 ,QQA200 QQA225 https//www.nsnlookup.com /fsg-95/fsc-9540/us 9540-
Restrictions 9540-00-148-4818
9540-00-148-4818 is a Structural Beam that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 9540-00-148-4818
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 9540-00-148-4818
- US Air Force (FGGI)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- FGKZ
- US Navy (N9BZ)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- N9ZD
- Brazil (YA01)
- Effective Date:
- 1 Aug 2000
- New Zealand (ZE01)
- Effective Date:
- 1 Apr 1991
- Portugal (ZP01)
- Effective Date:
- 1 Apr 1991
- Turkey (ZW01)
- Effective Date:
- 1 Nov 2005
Approved Sources 9540-00-148-4818
- Part Number
- Manufacturer
- Status
- AMS-QQ-A-200/3
- Manufacturer
- 0U583 - Sae International (Active)
- Incomplete Reference
- Incomplete Reference
- AND10136-1401
- 99237 - Airforce-Navy Aeronautical Design (Active)
- Incomplete Standard
- Incomplete Standard
- AMS-QQ-A-200/3
- 81343 - Society Of Automotive Engineers Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- QQA200-3
- 81348 - Federal Specifications Promulgated (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 9540-00-148-4818
- Characteristic
- Specifications
- FIIG
- Specifications
- A13100
- Basic Shape Style [AGTA]
- T Shape
- Fabrication Method [AARN]
- Extruded
- Fillet Radius Where Top Left Flange Joins Web Flange/Leg [BPXJ]
- 0.125 Inches Nominal
- Fillet Radius Where Top Right Flange Joins Web Flange/Leg [BPXL]
- 0.125 Inches Nominal
- First Tip Radius [AJJB]
- 0.063 Inches Nominal
- First Tip Style [CMZY]
- Lower Radius
- Heat Treatment [HEAT]
- T-3511 Solution Heat Treated
- Material [MATT]
- Aluminum Alloy Ams-Qq-A-200/3, Alloy 2024
- Nondefinitive Spec/Std Data [ZZZT]
- 2024 Alloy And T3511 Temper
- Left Side Top Flange Distance To Center Of Both Flanges [BPXD]
- 0.750 Inches Nominal
- Left Side Top Flange Thickness [ADXR]
- 0.063 Inches Nominal
- Left Top Inside Angle [CSMZ]
- 90.0 Degrees Nominal
- Leg Thickness [AJJP]
- 0.063 Inches Nominal
- Length [ABRY]
- 10.000 Feet Minimum And 12.000 Feet Maximum
- Right Side Top Flange Distance To Center Of Both Flanges [BPXG]
- 0.750 Inches Nominal
- Right Side Top Flange Thickness [ADXS]
- 0.063 Inches Nominal
- Right Top Inside Angle [CRZC]
- 90.0 Degrees Nominal
- Second Tip Relationship To First Tip [CNQJ]
- Identical
- Overall Height [ABKW]
- 0.750 Inches Nominal
- Weight Per Unit Measure [BRFD]
- 0.170 Pounds Per Linear Foot
- Third Tip Relationship To Preceding Tips [CNQL]
- Not Identical
- Third Tip Style [CNQM]
- Full Radius
- Third Tip Radius [CNBB]
- 0.063 Inches Nominal
- Top Flange Width [BQJG]
- 1.500 Inches Nominal
Weapon Systems (WSDC) 9540-00-148-4818
DLA Procurement Analysis 9540-00-148-4818
- Last Stock Position:
- 17 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 9540-00-148-4818
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 9540-00-148-4818
Freight Information 9540-00-148-4818
9540-00-148-4818 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 104420. A Sub NMFC of X. It has a NMFC Description of BEAMS NOI I/S. 9540-00-148-4818 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 53800 which rates the freight between FCL and LCL. 9540-00-148-4818 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 576 for ocean manifesting and military sealift. 9540-00-148-4818 is not classified as a special type of cargo when transported by water. 9540-00-148-4818 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 9540-00-148-4818
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- --
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- No Requirement
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
- No Requirement
Contracting Technical Data File (CTDF) 9540-00-148-4818 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: