9535-25-106-2112
Flat Washer
9535251062112 251062112
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
January 2024
1
Marketplace 9535-25-106-2112
Request a Quotation from participating marketplace vendors
Related Documents 9535-25-106-2112 5+ Documents (More...)
Equipment Air Cooler 251400322 , Strip, and Foil; Nonferrous Base Metal from Norway (NO) Plate 9535-25-106-2112
Base Metal from Norway (NO) Washer 9535-25-152-4087 Control Cam 9535-25-146-2914 Metal Plate 9535-25-106-2112
Flat Washer 9535251062112 251062112 https//www.nsnlookup.com /fsg-95 Plate, Sheet, Strip, and Foil