Premium Information is available for this item - Upgrade for $1 a day
9530-01-623-5828
Metal Bar
9530016235828 016235828 AMS-QQ-A-225/8
A metallic product of ferrous or nonferrous material. It is produced as a solid section in straight lengths or short barlike forms of cored or solid cross section. It may be round, square, hexagon, oval, half-oval, or half-round shape whose width, diameter, or distance between parallel faces is 3/8 inch or 10.0mm or greater. Rectangular shape cross-sectional dimensions are limited to those established in Appendix C, FIIG A131. It is round to a maximum diameter of 24 inches or 610.0mm. For a rectangular shape less than 3/32 inch or 2.5mm thickness, see WIRE (1), NONELECTRICAL. View more Metal Bar
May 2023
2
Marketplace 9530-01-623-5828
Request a Quotation from participating marketplace vendors
Related Documents 9530-01-623-5828 5+ Documents (More...)
Metal Bar 9530016235828 016235828 9530-01-623-5828 9530016235828 016235828 is a metallic product
-225 BAR, AMS-QQ-A- AMS-QQ-A-225/8 BAR,METAL 32 FT NS Request Quotation AMS4117 - AMS-QQ-A-225/
8 -225 BAR, AMS-QQ-A- AMS-QQ-A-225/8 BAR,METAL 32 FT FT NS Request Quotation AMS4117 - AMS-QQ-A-225/8
/8 -225 BAR, AMS-QQ-A- AMS-QQ-A-225/8 BAR,METAL 32 FT FT NS Request Quotation AMS4117 - AMS-QQ-A-225/
-225 BAR, AMS-QQ-A- AMS-QQ-A-225/8 BAR,METAL 32 FT NS Request Quotation AMS4117 - AMS-QQ-A-225/
-225 BAR, AMS-QQ-A- AMS-QQ-A-225/8 BAR,METAL 32 FT NS Request Quotation AMS4117 - AMS-QQ-A-225/
8 -225 BAR, AMS-QQ-A- AMS-QQ-A-225/8 BAR,METAL 32 FT FT NS Request Quotation AMS4117 - AMS-QQ-A-225/8
BAR,METAL 32 NS Request AMS4117 - AMS-QQ-A-225/8 BAR,METAL 32 FT NS Request Quotation QQ-A-225
BAR,METAL 32 NS Request AMS4117 - AMS-QQ-A-225/8 BAR,METAL 32 FT NS Request Quotation QQ-A-225
Restrictions 9530-01-623-5828
9530-01-623-5828 is a Metal Bar that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 9530-01-623-5828
- US Air Force (FXGI)
- Effective Date:
- 1 Nov 2013
Approved Sources 9530-01-623-5828
- Part Number
- Manufacturer
- Status
- AMS-QQ-A-225/8
- Manufacturer
- 0U583 - Sae International (Active)
- Incomplete Reference
- Incomplete Reference
- AMS-QQ-A-225/8
- 81343 - Society Of Automotive Engineers Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 9530-01-623-5828
- Characteristic
- Specifications
- FIIG
- Specifications
- A13100
- Basic Shape Style [AGTA]
- Round
- Cross Section Outside Diameter [ADVL]
- 1.750 Inches Nominal
- Heat Treatment [HEAT]
- T-651 Solution Heat Treated
- End Item Identification [AGAV]
- B-1 Acft
- Material Document And Classification [MDCL]
- Qq-A-225/8 Fed Spec 1St Material Response
- Material [MATT]
- Aluminum Alloy 6061
- Length [ABRY]
- 1.20 Inches Nominal
DLA Procurement Analysis 9530-01-623-5828
Management Data 9530-01-623-5828
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 9530-01-623-5828
Freight Information 9530-01-623-5828
9530-01-623-5828 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 104340. A Sub NMFC of X. It has a NMFC Description of BARS/RODS NOI I/S. 9530-01-623-5828 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 53760 which rates the freight between FCL and LCL. 9530-01-623-5828 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 572 for ocean manifesting and military sealift. 9530-01-623-5828 is not classified as a special type of cargo when transported by water. 9530-01-623-5828 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 9530-01-623-5828 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- S
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: