Premium Information is available for this item - Upgrade for $1 a day
9530-01-470-5749
Metal Bar
9530014705749 014705749 AMS-QQ-A-200/11 SAE AMS-QQ-A-200 QQ-A-200/11 T73511 0.750X144 AMS-QQ-A-200/11 T73511 0.750X144 QQ-A-200/11
A metallic product of ferrous or nonferrous material. It is produced as a solid section in straight lengths or short barlike forms of cored or solid cross section. It may be round, square, hexagon, oval, half-oval, or half-round shape whose width, diameter, or distance between parallel faces is 3/8 inch or 10.0mm or greater. Rectangular shape cross-sectional dimensions are limited to those established in Appendix C, FIIG A131. It is round to a maximum diameter of 24 inches or 610.0mm. For a rectangular shape less than 3/32 inch or 2.5mm thickness, see WIRE (1), NONELECTRICAL. View more Metal Bar
May 2023
14
Marketplace 9530-01-470-5749
Request a Quotation from participating marketplace vendors
Updated Every 15 Minutes 
Updated Every Day Updated Every Day 
Updated Every Day Related Documents 9530-01-470-5749 5+ Documents (More...)
T73511 0.750X144QQ-A- A 200 AMS-QQ-A-200/11 T73511 0.750X144 https//www.nsnlookup.com 200 https /11
Structural Channel 9540004095877 004095877 Structural Angle 9540000064922000064922 004095877 BEAM - / AMS-QQ-A-200 /11
/fsg-95/fsc-9530/us 9530-01-470-5749 Metal Bar 9530014705749 014705749 SAE AMS-QQ-A-200 QQ-A-200/11
T73511 0.750X144 AMS-QQ-A-200/11 T73511 0.750X144 QQ-A-200/11 A metallic - AMS-QQ-A-200/11 T73511 A AMS-QQ-A
T73511 0.750X144 QQ-A -200/11 A metallic T73511 - - AMS-QQ-A- 200 /11 BEAM - / AMS-QQ-A-200 /
/11 A AMS-QQ-A A AMS-QQ-A-200 /11 Structural A https//www.nsnlookup.com / https QQ-A-200/11 https//www.nsnlookup.com
013795683AMS-QQ-A-200/11 HA18106 -200 AMS-QQ-A -200/11 Request / / 11 - AMS-QQ-A-200 /11 013795683AMS-QQ-A
-200/11 HA18106 - - AMS-QQ-A -200/11 9540219002434219002434 - - AMS-QQ-A-200 /11 /11 // // AMS-QQ-A AMS-QQ-A
Angle 9540004923400004923400 - - 200 -200 /11 HA18106 AMS-QQ-A HA18106 AMS-QQ-A T73511 0.750X144 AMS-QQ-A-200/11
-95/fsc-9530/us 9530-01-470-5749 Metal Bar 9530014705749 014705749 SAE AMS-QQ-A-200 QQ-A-200/11 T73511
Restrictions 9530-01-470-5749
9530-01-470-5749 is a Metal Bar that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
End Users 9530-01-470-5749
- US Air Force (FGGI)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- FGKZ
Approved Sources 9530-01-470-5749
- Part Number
- Manufacturer
- Status
- AMS-QQ-A-200/11
- Manufacturer
- 0U583 - Sae International (Active)
- Incomplete Reference
- Incomplete Reference
- AMS-QQ-A-200/11 T73511 0.750X144
- 0U583 - Sae International (Active)
- Primary Buy
- Primary Buy
- SAE AMS-QQ-A-200
- 05AY8 - Sae Inc (Obsolete)
- Original Design
- Original Design
- QQ-A-200/11 T73511 0.750X144
- 81348 - Federal Specifications Promulgated (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- AMS-QQ-A-200/11 T73511 0.750X144
- 81343 - Society Of Automotive Engineers Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- AMS-QQ-A-200/11
- 81343 - Society Of Automotive Engineers Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- QQ-A-200/11
- 81348 - Federal Specifications Promulgated (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 9530-01-470-5749
- Characteristic
- Specifications
- FIIG
- Specifications
- A13100
- Edge Type [AQQR]
- Square
- Basic Shape Style [AGTA]
- Round
- Cross Section Outside Diameter [ADVL]
- 0.750 Inches Nominal
- Fabrication Method [AARN]
- Extruded
- Heat Treatment [HEAT]
- T-73511 Solution Heat Treated
- Material Document And Classification [MDCL]
- Qq-A-200/11 Fed Spec 1St Material Response
- Material [MATT]
- Aluminum Alloy 7075
- Length [ABRY]
- 144.000 Inches Nominal
- Special Features [FEAT]
- Aircraft, B-2 Bomber (Atb)
- Weight Per Unit Measure [BRFD]
- 600.000 Pounds Per Piece
- Surface Condition [SFCD]
- Any Acceptable Overall
DLA Procurement Analysis 9530-01-470-5749
Management Data 9530-01-470-5749
Similar Supply Items to 9530-01-470-5749
Freight Information 9530-01-470-5749
9530-01-470-5749 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 104340. A Sub NMFC of X. It has a NMFC Description of BARS/RODS NOI I/S. 9530-01-470-5749 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 53760 which rates the freight between FCL and LCL. 9530-01-470-5749 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 572 for ocean manifesting and military sealift. 9530-01-470-5749 is not classified as a special type of cargo when transported by water. 9530-01-470-5749 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 9530-01-470-5749 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- K
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: