Premium Information is available for this item - Upgrade for $1 a day
9530-01-431-8798
Metal Bar
9530014318798 014318798 AMS 4173 AMS-QQ-A-200/8 AMS-STD-184 QQ-A-200/8 QQ-A-200/8-T6511,0.500X1.750X144 SAE-AMS-QQ-A-200/8
A metallic product of ferrous or nonferrous material. It is produced as a solid section in straight lengths or short barlike forms of cored or solid cross section. It may be round, square, hexagon, oval, half-oval, or half-round shape whose width, diameter, or distance between parallel faces is 3/8 inch or 10.0mm or greater. Rectangular shape cross-sectional dimensions are limited to those established in Appendix C, FIIG A131. It is round to a maximum diameter of 24 inches or 610.0mm. For a rectangular shape less than 3/32 inch or 2.5mm thickness, see WIRE (1), NONELECTRICAL. View more Metal Bar
November 2023
10
Marketplace 9530-01-431-8798
Request a Quotation from participating marketplace vendors
Related Documents 9530-01-431-8798 5+ Documents (More...)
AMS-STD-184 AMS-QQ-A-200/8 ALLOY 6061 TMPR T NAS 345-60 60-5009 QQ-A-200/8 AMS-QQ-A-200/8 A structural
Metal Bar 9530014318798 014318798,AMS 4173 AMS-STD-184QQ-A-200/8QQ-A-200/8-T6511,0.500X1.750X144
Metal Bar 9530014318798 014318798,AMS 4173 AMS-STD-184QQ-A-200/8QQ-A-200/8-T6511,0.500X1.750X144
005149976 SAE-AMS-QQ-A-200/8 https//www.nsnlookup.com /fsg-95/fsc-9540/us 9540-01-071-4725 Structural
5401 60-298 10262 372 ASTM B221 AMS-STD-184 PA5545 LS3229-2 AMS-QQ-A-200/8 QQ-A-200/8 A structural
Metal Bar 9530014318798 014318798,AMS 4173 AMS-STD-184QQ-A-200/8QQ-A-200/8-T6511,0.500X1.750X144
95/fsc-9540/us 9540-00-059-7280 Structural Angle 9540000597280 000597280 SAE-AMS-QQ-A-200/8 ASTM B221
Upgrade your Account Upgrade 4710-00-147-8241Metallic Tube4710001478241 001478241 SAE-AMS-QQ-A -200/8
your Account Upgrade 9540-00-197-9861Structural Angle9540001979861 001979861 734RR SAE-AMS-QQ-A-200/8
your Account Upgrade 9540-00-197-9861Structural Angle9540001979861 001979861 734RR SAE-AMS-QQ-A-200/8
Restrictions 9530-01-431-8798
9530-01-431-8798 is a Metal Bar that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 9530-01-431-8798
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 9530-01-431-8798
- US Air Force (FGGI)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- FGKZ
Approved Sources 9530-01-431-8798
- Part Number
- Manufacturer
- Status
- AMS 4173
- Manufacturer
- 0U583 - Sae International (Active)
- Incomplete Reference
- Incomplete Reference
- AMS-QQ-A-200/8
- 0U583 - Sae International (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- AMS-STD-184
- 0U583 - Sae International (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- QQ-A-200/8
- 81348 - Federal Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- AMS-QQ-A-200/8
- 81343 - Society Of Automotive Engineers Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- QQ-A-200/8-T6511,0.500X1.750X144
- 14153 - Defense Logistics Agency (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- SAE-AMS-QQ-A-200/8
- 0U583 - Sae International (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- AMS-STD-184
- 81343 - Society Of Automotive Engineers Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 9530-01-431-8798
- Characteristic
- Specifications
- FIIG
- Specifications
- A13100
- Basic Shape Style [AGTA]
- Flat
- Cross-Sectional Width [ADWH]
- 1.750 Inches Nominal
- Cross-Sectional Thickness [ADVM]
- 0.5000 Inches Nominal
- Fabrication Method [AARN]
- Any Acceptable
- Heat Treatment [HEAT]
- T-6511 Solution Heat Treated
- Material [MATT]
- Aluminum Alloy, Ams-Qq-A-200/8, Alloy 6061
- Nondefinitive Spec/Std Data [ZZZT]
- Alloy 6061 And Temper T6511
- Length [ABRY]
- 10.000 Feet Minimum And 12.000 Feet Maximum
- Weight Per Unit Measure [BRFD]
- 1.029 Pounds Per Linear Foot
Weapon Systems (WSDC) 9530-01-431-8798
DLA Procurement Analysis 9530-01-431-8798
Management Data 9530-01-431-8798
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 9530-01-431-8798
Freight Information 9530-01-431-8798
9530-01-431-8798 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 104340. A Sub NMFC of X. It has a NMFC Description of BARS/RODS NOI I/S. 9530-01-431-8798 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 53760 which rates the freight between FCL and LCL. 9530-01-431-8798 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 572 for ocean manifesting and military sealift. 9530-01-431-8798 is not classified as a special type of cargo when transported by water. 9530-01-431-8798 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 9530-01-431-8798
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- --
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- No Requirement
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
- No Requirement
Procurement History 9530-01-431-8798 4 Records
Contracting Technical Data File (CTDF) 9530-01-431-8798 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- K
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: