Premium Information is available for this item - Upgrade for $1 a day
9530-01-424-3565
Metal Bar
9530014243565 014243565 SAE-AMS-QQ-A-200/8 QQ-A-200/8-T6511,0.250X3.50X12 AMS-QQ-A-200/8 ASTM B221 QQ-A-200/8
A metallic product of ferrous or nonferrous material. It is produced as a solid section in straight lengths or short barlike forms of cored or solid cross section. It may be round, square, hexagon, oval, half-oval, or half-round shape whose width, diameter, or distance between parallel faces is 3/8 inch or 10.0mm or greater. Rectangular shape cross-sectional dimensions are limited to those established in Appendix C, FIIG A131. It is round to a maximum diameter of 24 inches or 610.0mm. For a rectangular shape less than 3/32 inch or 2.5mm thickness, see WIRE (1), NONELECTRICAL. View more Metal Bar
November 2023
6

Marketplace 9530-01-424-3565
Request a Quotation from participating marketplace vendors








Related Documents 9530-01-424-3565 5+ Documents (More...)
Quotation ASTM-B221 ASTM-B221ASTM-B221 - SAE-AMS-QQ-A 200/8 Quotation - SAE-AMS-QQ-A -200/8 Quotation
Quotation ASTM-B221 ASTM-B221ASTM-B221 - SAE-AMS-QQ-A 200/8 Quotation - SAE-AMS-QQ-A -200/8 Quotation
https// ASTM-B221 SAE-AMS-QQ-A - SAE-AMS-QQ-A -200/8 Quotation ASTM-B221 - SAE-AMS-QQ-A - SAE-AMS-QQ-A
- SAE-AMS-QQ-A 200/8 Quotation - - SAE-AMS-QQ-A - SAE-AMS-QQ-A -200/8 Quotation SAE-AMS-QQ-A -200/8
https ASTM-B221 https SAE-AMS-QQ-A SAE-AMS-QQ-A -200/8 Quotation ASTM-B221 -95/fsc- 9540/us Quotation
Quotation METAL SAE-AMS-QQ-A -200/8 Quotation METAL https https// https//www.nsnlookup.com SAE-AMS-QQ-A
-200/8 Quotation ASTM-B221 - SAE-AMS-QQ-A - SAE-AMS-QQ-A -200/8 Quotation 001979856 Quotation ASTM-B221
- SAE-AMS-QQ-A 200/8 Quotation ASTM-B221 Quotation ASTM-B221 -200/8 Quotation https//www.nsnlookup.com
9540001979856001979856 Quotation ASTM-B221 - SAE-AMS-QQ-A 200/8 Quotation ASTM-B221 Quotation ASTM-B221
-200/8SAE-AMS-QQ-A -200/8 Quotation ASTM-B221 ASTM-B221ASTM-B221 - SAE-AMS-QQ-A 200/8 Quotation - SAE-AMS-QQ-A
Restrictions 9530-01-424-3565
9530-01-424-3565 is a Metal Bar that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 9530-01-424-3565
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 9530-01-424-3565
- US Air Force (FGGI)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- FGKZ
Approved Sources 9530-01-424-3565
- Part Number
- Manufacturer
- Status
- SAE-AMS-QQ-A-200/8
- Manufacturer
- 0U583 - Sae International (Active)
- Incomplete Reference
- Incomplete Reference
- QQ-A-200/8-T6511,0.250X3.50X12
- 14153 - Defense Logistics Agency (Active)
- Secondary Buy
- Secondary Buy
- AMS-QQ-A-200/8
- 81343 - Society Of Automotive Engineers Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- ASTM B221
- 81346 - American Society For Testing And (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- AMS-QQ-A-200/8
- 0U583 - Sae International (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- QQ-A-200/8
- 81348 - Federal Specifications Promulgated (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 9530-01-424-3565
- Characteristic
- Specifications
- FIIG
- Specifications
- A13100
- Basic Shape Style [AGTA]
- Flat
- Cross-Sectional Width [ADWH]
- 3.500 Inches Nominal
- Cross-Sectional Thickness [ADVM]
- 0.2500 Inches Nominal
- Fabrication Method [AARN]
- Extruded
- Heat Treatment [HEAT]
- T-6511 Solution Heat Treated
- Material [MATT]
- Aluminum Alloy Ams-Qq-A-200/8, Alloy 6061
- Nondefinitive Spec/Std Data [ZZZT]
- Alloy 6061 And Temper T6511
- Length [ABRY]
- 12.000 Feet Nominal
- Weight Per Unit Measure [BRFD]
- 12.348 Pounds Per Linear Foot
Weapon Systems (WSDC) 9530-01-424-3565
DLA Procurement Analysis 9530-01-424-3565
- Last Stock Position:
- 230 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 9530-01-424-3565
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of āLā or āFā, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 9530-01-424-3565
Freight Information 9530-01-424-3565
9530-01-424-3565 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 104340. A Sub NMFC of X. It has a NMFC Description of BARS/RODS NOI I/S. 9530-01-424-3565 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 53760 which rates the freight between FCL and LCL. 9530-01-424-3565 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 572 for ocean manifesting and military sealift. 9530-01-424-3565 is not classified as a special type of cargo when transported by water. 9530-01-424-3565 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 9530-01-424-3565
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- --
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- No Requirement
- Special requirements
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
- No Requirement
Contracting Technical Data File (CTDF) 9530-01-424-3565 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- K
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: