Premium Information is available for this item - Upgrade for $1 a day
9530-01-301-8919
Metal Bar
9530013018919 013018919 MIL-C-15726 MIL-C-15726 TEMPER 060 MIL-C-15726C71500TEMP060 5 1/4 MIL-C-15726L1 ROUND BAR SOFT TEMPER 5 1/4IN MIL-C-15726 TEMPER 060L1 MIL-C-15726C71500TEMP060 5 1/4L1 ROUND BAR SOFT TEMPER 5 1/4INL1
A metallic product of ferrous or nonferrous material. It is produced as a solid section in straight lengths or short barlike forms of cored or solid cross section. It may be round, square, hexagon, oval, half-oval, or half-round shape whose width, diameter, or distance between parallel faces is 3/8 inch or 10.0mm or greater. Rectangular shape cross-sectional dimensions are limited to those established in Appendix C, FIIG A131. It is round to a maximum diameter of 24 inches or 610.0mm. For a rectangular shape less than 3/32 inch or 2.5mm thickness, see WIRE (1), NONELECTRICAL. View more Metal Bar
May 2023
11
Marketplace 9530-01-301-8919
Request a Quotation from participating marketplace vendors
Related Documents 9530-01-301-8919 5+ Documents (More...)
/fsg-95/fsc-9530/us 9530-01-301-8919 Metal Bar 9530013018919 013018919,MIL-C-15726 MIL-C-15726 TEMPER
060 MIL-C-15726C71500TEMP060 5 1/4 MIL-C-15726L1 ROUND BAR SOFT TEMPER 5 1/4IN MIL-C-15726 TEMPER 060
-9530/us 9530-01-301-8919 Metal Bar 9530013018919 013018919,MIL-C-15726 MIL-C-15726 TEMPER 060 MIL-C-
15726C71500TEMP060 5 1/4 MIL-C-15726L1 ROUND BAR SOFT TEMPER 5 1/4IN MIL-C-15726 TEMPER 060 MIL-C-15726C71500HOTFORGED5IN
/fsg-95/fsc-9530/us 9530-01-301-8919 Metal Bar 9530013018919 013018919,MIL-C-15726 MIL-C-15726 TEMPER
060 MIL-C-15726C71500TEMP060 5 1/4 MIL-C-15726L1 ROUND BAR SOFT TEMPER 5 1/4IN MIL-C-15726 TEMPER 060
MIL-C-15726 TEMPER 060L1 MIL-C-15726C71500HOTFORGED5INL1 MILC15726 C71500 TEMP060 5INRDL1 ROUND BAR
70/30 H01 3.00IN ROUND BAR HARD TEMPER 3IN MIL-C-15726 COMPC71500L1 MILC15726 COMPC71500 MIL-C-
COMPC71500 MIL-C- https//www.nsnlookup.com /fsg-95/fsc-9530/us 9530-01-301-8919 Metal Bar 9530013018919
013018919,MIL-C-15726 70/30 H01 3.00IN ROUND BAR HARD TEMPER 3IN MIL-C-15726 COMPC71500L1 MILC15726
Restrictions 9530-01-301-8919
9530-01-301-8919 is a Metal Bar that is specifically designed to be or selected as being nuclear hard. In addition it has other critical features such as tolerance, fit restrictions or application.Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 9530-01-301-8919
- US Navy (N1H5)
- Effective Date:
- 1 Apr 1991
- Supplementary Collaborators:
- JB
- Supplementary Receivers:
- GG
Approved Sources 9530-01-301-8919
- Part Number
- Manufacturer
- Status
- MIL-C-15726
- Manufacturer
- 81349 - Military Specifications (Active)
- Incomplete Standard
- Incomplete Standard
- MIL-C-15726 TEMPER 060
- 81349 - Military Specifications (Active)
- Incomplete Standard
- Incomplete Standard
- MIL-C-15726C71500TEMP060 5 1/4
- 81349 - Military Specifications (Active)
- Incomplete Standard
- Incomplete Standard
- MIL-C-15726L1
- 03950 - Naval Inventory Control Point (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- ROUND BAR SOFT TEMPER 5 1/4IN
- 81349 - Military Specifications (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- MIL-C-15726 TEMPER 060L1
- 03950 - Naval Inventory Control Point (Active)
- Secondary Buy
- Secondary Buy
- MIL-C-15726C71500TEMP060 5 1/4L1
- 03950 - Naval Inventory Control Point (Active)
- Secondary Buy
- Secondary Buy
- ROUND BAR SOFT TEMPER 5 1/4INL1
- 03950 - Naval Inventory Control Point (Active)
- Secondary Buy
- Secondary Buy
Datasheet 9530-01-301-8919
- Characteristic
- Specifications
- FIIG
- Specifications
- A13100
- Basic Shape Style [AGTA]
- Round
- Criticality Code Justification [CRTL]
- Zzzx
- Cross Section Outside Diameter [ADVL]
- 5.250 Inches Nominal
- Departure From Cited Designator [ZZZX]
- Material Controlled Iaw Navsea 0948-Lp-045-7010 Material Control Standard For Level I Items
- Fabrication Method [AARN]
- Any Acceptable
- Heat Treatment [HEAT]
- Soft
- End Item Identification [AGAV]
- Bars And Rods,Nonferrous Base Me Tal
- Material Document And Classification [MDCL]
- Mil-C-15726, Comp 70-30 Mil Spec 1St Material Response
- Material [MATT]
- Copper Alloy 715
- Nondefinitive Spec/Std Data [ZZZT]
- Alloy C71500 Composition And Bar Form And 060 Temper
Management Data 9530-01-301-8919
Navy
- Cognizance:
- 1H
- Consumable material assigned to NAVICP MECH for inventory management
Naval Inventory Control Point, Mechanicsburg
- Special Material ID:
- L1
- An item that supports either a SUBSAFE or Level 1 system that has undergone the extreme material control and quality assurance techniques that provide objective evidence of its acceptance for its appropriate application. Each item has certification papers (or special markings that provide traceability to the certification) that pedigree its material and physical properties, provide traceability, to manufacturer, contract list and lot, and document the quality assurance system and test requirements applied to the item.
- Issue, Repair, Requisition Restriction Code:
- 00
- No Restriction
- Special Material Content:
- 9
- Non-Hazardous or Non-Sensitive Item
NATO Stock Numbers Related to 9530-01-301-8919
Freight Information 9530-01-301-8919
9530-01-301-8919 has freight characteristics managed by the Food and Drug Administration (FDA).It has a National Motor Freight Classification (NMFC) of 104340. A Sub NMFC of X. It has a NMFC Description of BARS/RODS NOI I/S. 9530-01-301-8919 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 53760 which rates the freight between FCL and LCL. 9530-01-301-8919 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 572 for ocean manifesting and military sealift. 9530-01-301-8919 is not classified as a special type of cargo when transported by water. 9530-01-301-8919 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 9530-01-301-8919
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- Packaging Data does not meet current MIL-STD-2073-1E
- Storage Environment
- Unheated General Purpose
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- Over 10lb
- Less than 85G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- 18.0" H x 5.0" W x 5.0" L
- --
- --
- --
- Special Requirements
- 18.0" H x 5.0" W x 5.0" L
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- Special Requirement
- Special Requirements – see Specific Instructions or Drawings provided
- Special Requirements. See Specific Instructions or Drawings Provided
- Special Requirements. See Specific Instructions or Drawings Provided
- Special requirement – See specific instructions or drawings provided
- Open for inspection or use only
- Special Requirements – see Specific Instructions or Drawings provided
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- No Requirement