Premium Information is available for this item - Upgrade for $1 a day
9530-01-241-2005
Metal Bar
9530012412005 012412005 QQ-N-286 QQ-N-286L1
A metallic product of ferrous or nonferrous material. It is produced as a solid section in straight lengths or short barlike forms of cored or solid cross section. It may be round, square, hexagon, oval, half-oval, or half-round shape whose width, diameter, or distance between parallel faces is 3/8 inch or 10.0mm or greater. Rectangular shape cross-sectional dimensions are limited to those established in Appendix C, FIIG A131. It is round to a maximum diameter of 24 inches or 610.0mm. For a rectangular shape less than 3/32 inch or 2.5mm thickness, see WIRE (1), NONELECTRICAL. View more Metal Bar
May 2023
6
Marketplace 9530-01-241-2005
Request a Quotation from participating marketplace vendors
Related Documents 9530-01-241-2005 5+ Documents (More...)
Day 9530-01-241-2005 RQST NE Updated Every Day 9530-01-241-2005 RQST Updated Every Day 9530-01-241-2005
/fsc-9530/us 9530-01-241-2005 Metal Bar 9530012412005012412005,QQ-N-286 QQ-N-286QQ-N-286L1 A metallic
87683-4304 ITEM 57 409-4677518 ITEM 57L1 1/2-13UNC-3AX3INLG QQ-N-286L1 87683-4304 ITEM 57L1 An externally
RNCC 3 RNVC 1 DAC C MIL-DTL-1222 TYII QQ-N-286 https//www.nsnlookup.com /fsg-53/fsc-5305/us 5305-
517-5486331 ITEM 39 5/16-18UNC-3A X 2 1/4 5/16-18UNC-3A X 2 1/4L1 MIL-DTL-1222 TYII QQ-N-286L1 218032496L1
Metal Bar 9530012412005 012412005,QQ-N-286 /4-10UNC-2AX5 1/4L1 MIL-DTL-1222 GR500(QQ-N-286 https
Metal Bar 9530012412005 012412005,QQ-N-286 RNCC 3 RNVC 1 DAC D 1/2-13UNC-3AX3INLG QQ-N-286 https
RNCC 3 RNVC 1 DAC D 1/2-13UNC-3AX3INLG QQ-N-286 https//www.nsnlookup.com /fsg-53/fsc-5305/us 5305
Head Cap Screw5305016407491 016407491 218032496 https//www.nsnlookup.com /fsg-95/fsc-9530/us 9530-01-241-2005
Metal Bar 9530012412005 012412005,QQ-N-286 Head Cap Screw 5305016407491 Upgrade 5305-01-640-7491Socket
Restrictions 9530-01-241-2005
9530-01-241-2005 is a Metal Bar that is specifically designed to be or selected as being nuclear hard. In addition it has other critical features such as tolerance, fit restrictions or application.Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 9530-01-241-2005
- US Navy (N1H5)
- Effective Date:
- 1 Apr 1991
- Supplementary Receivers:
- GG
Approved Sources 9530-01-241-2005
- Part Number
- Manufacturer
- Status
- QQ-N-286
- Manufacturer
- 81348 - Federal Specifications Promulgated (Active)
- Incomplete Standard
- Incomplete Standard
- QQ-N-286L1
- 03950 - Naval Inventory Control Point (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
Datasheet 9530-01-241-2005
- Characteristic
- Specifications
- FIIG
- Specifications
- A13100
- Basic Shape Style [AGTA]
- Round
- Criticality Code Justification [CRTL]
- Zzzw
- Cross Section Outside Diameter [ADVL]
- 6.000 Inches Nominal
- Departure From Cited Document [ZZZW]
- Quality Control In Accordance With Navships 0948-045-7010 Material Identification And Control Instruction For Level 1 Items
- Fabrication Method [AARN]
- Hot Finish
- Heat Treatment [HEAT]
- Age Hardening
- Material Document And Classification [MDCL]
- Qq-N-286, Class A Fed Spec 1St Material Response
- Material [MATT]
- Nickel Alloy
- Nondefinitive Spec/Std Data [ZZZT]
- A Class And 2 Form
DLA Procurement Analysis 9530-01-241-2005
Management Data 9530-01-241-2005
Navy
- Cognizance:
- 1H
- Consumable material assigned to NAVICP MECH for inventory management
Naval Inventory Control Point, Mechanicsburg
- Special Material ID:
- L1
- An item that supports either a SUBSAFE or Level 1 system that has undergone the extreme material control and quality assurance techniques that provide objective evidence of its acceptance for its appropriate application. Each item has certification papers (or special markings that provide traceability to the certification) that pedigree its material and physical properties, provide traceability, to manufacturer, contract list and lot, and document the quality assurance system and test requirements applied to the item.
- Issue, Repair, Requisition Restriction Code:
- 00
- No Restriction
- Special Material Content:
- 9
- Non-Hazardous or Non-Sensitive Item
Similar Supply Items to 9530-01-241-2005
Freight Information 9530-01-241-2005
9530-01-241-2005 has freight characteristics managed by the Food and Drug Administration (FDA).It has a National Motor Freight Classification (NMFC) of 139800. A Sub NMFC of X. It has a NMFC Description of NICKEL BARS BILLETS BRIQUETTES ETC. 9530-01-241-2005 is rated as class 65 when transported by Less-Than Truckload (LTL) freight. 9530-01-241-2005 is rated as class 65 when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 70200 which rates the freight between FCL and LCL. 9530-01-241-2005 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 576 for ocean manifesting and military sealift. 9530-01-241-2005 is not classified as a special type of cargo when transported by water. 9530-01-241-2005 is not a consolidation, but exceeds 84" in at least one dimension. It may not be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 9530-01-241-2005
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- Packaging Data does not meet current MIL-STD-2073-1E
- Storage Environment
- Unheated General Purpose
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- Over 10lb
- Less than 85G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- 180.0" H x 6.0" W x 6.0" L
- --
- --
- --
- Any Suitable Process
- 180.0" H x 6.0" W x 6.0" L
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- Special Requirement
- Special Requirements – see Specific Instructions or Drawings provided
- Special Requirements. See Specific Instructions or Drawings Provided
- Special Requirements. See Specific Instructions or Drawings Provided
- Special requirement – See specific instructions or drawings provided
- Open for inspection or use only
- Special Requirements – see Specific Instructions or Drawings provided
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
- No Requirement